Casio IT-600 Series User manual

IT-600 Series
Quick Start Guide
(Version 1.07)
CASIO Computer Co., Ltd.
Copyright ©2010. All rights reserved.
May 2010

2
Table of Contents
Editorial Record 4
Preface 6
Chapter 1. Product Overview 7
1.1 Hardware Specifications 7
1.2 Library Configuration 11
1.3 Development Reference Manuals 12
1.4 Sample Program 13
Chapter 2. Prerequisites 14
2.1 Skills Required 14
2.2 Hardware Required 15
2.3 Software Required 17
Chapter 3. Installing SDK to PC 19
3.1 Application Development 19
3.2 Installing CASIO SDK Files 20
Chapter 4. Connecting Power Supply to HA-D60IO, HA-D62IO 24
4.1 HA-D60IO 24
4.2 HA-D62IO 26
Chapter 5. Connecting the IT-600 to PC 29
5.1 ActiveSync Connection 30
5.2 ActiveSync Connection via USB 31
5.2.1 Installing ActiveSync for the First Time 31
5.2.2 If ActiveSync Is Already Installed 37
5.2.3 ActiveSync Connection via IrDA 39
5.3 USB Connection via Windows Mobile Device Center 40
5.4 ActiveSync Connection via WLAN 42
5.5 Bluetooth Connection 45
5.6 Accessing Shared Network Drive on Your LAN 46
5.7 Direct TCP/IP Connection from Visual Studio 47
5.8 ActiveSync Connection via Ethernet 49
Chapter Setting Up the Development Environment 51
Chapter 6. 51
6.1 Installing CAB Files 51
6.2 eMbedded Visual C++ 4.0 52
6.3 Visual Studio 2005 53
6.4 Visual Studio .NET 2003 54
Chapter 7. Device Emulator 55
7.1 Software Required 55
7.2 Starting Up the Device Emulator 58
7.3 Using the Device Emulator 59
7.3.1 IT-600 Device Emulator 59
7.3.2 I/O Simulator 60
7.3.3 Connecting via ActiveSync 65
7.4 Debugging Application 67
7.4.1 Setting Build Configuration 67
7.4.2 Debugging Application 68
Chapter 8. eMbedded Visual C++ 70
8.1 Building Simple eVC++ 4.0 Test Program 70

3
8.2 Using CASIO Libraries from eVC++ 4.0 72
Chapter 9. Visual Studio 74
9.1 Using CASIO .NET Libraries from VB .NET 75
9.2 Using CASIO .NET Libraries from C# 77
9.3 Using CASIO Libraries from C++ 79
Chapter 10. Resources 83
Chapter 11. Troubleshooting 84
No part of this document may be produced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd.
in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO
Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this
manual and specifically disclaims any express or implied warranties of merchantability or fitness for
any particular purpose.
© 2010 CASIO Computer Co., Ltd. All rights reserved.

4
Editorial Record
Manual
Version
no.
Date edited Page Content
0.90 October 2005 Tentative version
0.91 November 2005 29 “ActiveSync connection via cradle” is added in Chapter 5.1
“ActiveSync Connection”.
30 The descriptions in Chapters 5.1 and 5.2 are revised.
75 “Import Library” and “Header File are removed from Table 7.1
in Chapter 7.1.
0.92 November 2005
77 “Import Library” and “Header File are removed from Table 7.2
in Chapter 7.2.
1.00 November 2005 Original version
1.01 January 2006 16, 22,
24
The contents in Chapters 5.2.1, 5.2.2 and 5.2.3 are updated.
1.02 July 2006 9, 35 The explanation about Visual Studio 2005 is added in Chapters
2.3 and 7.
7 “HA-D62IO” and “HA-D51TG” are added in Chapter 2.2.
8 “HA-D62IO” is added in Fig 2.1
15 to 17 Chapter 4.2 “HA-D62IO” is added.
1.03 November 2006
34 to 35 Chapter 5.7 “ActiveSync Connection via Ethernet” is added.
6 Hardware specifications in Table 1.1 are updated.
8 Regulatory note for the Chinese radio related regulations is
added.
9 IT-600M30E2, M30C2, M30R2, M30CR2, M30E2-CN,
M30C2-CN, M30R2-CN, M30CR2-CN are added in Table 2.1.
12 Software in Chapter 2.3 is updated.
13 Chapter 3.1 “Application Development” is added.
14 Chapter 3.2 “Installing CASIO SDK Files” is added.
15 Chapter 3.3 “Installing CAB Files” is added.
16 Figures 3.1 and 3.2 in Chapter 3.4 are corrected.
35 to 36 Chapter 5.3 “USB Connection via Windows Mobile Device
Center” is added.
42 to 43 Direct link method with Visual Studio 2005 is added in Chapter
5.7 “Direct TCP/IP Connection from Visual Studio”.
50 Chapter 6.3 “Sample Program” is added.
56 to 58 In Chapter 7.3 “Using CASIO Libraries from C++”, a
development method for VCC++ Project with Visual Studio is
added.
59 Chapter 7.4 “Sample Program” is added.
1.04 January 2008
60 to 73 Chapter 8. “Device Emulator” is added.
56 In Chapter 7.3, the explanation on page 56 is updated.1.05 April 2008
75 In Chapter 10, note about “VCC++ application
development with Visual Studio 2005” is removed.
Continue.

5
10 In Chapter 1.1, a note about dead pixels is added.
10 to 12 In Chapter 1, Library Configuration, Development
Reference Manuals, and Sample Program are added.
19 In Chapter 3.2, a note about User Account Control is
added.
17 to 21,
49 to 52
Chapter 3 is divided into two chapters, Installing SDK to
PC and Setting Up the Development Environment.
49 The configuration of the CAB files is changed.
50 In Chapter 6.1, the content in Table 6.1 is updated and a
note about FLINK Library is added.
53 to 68 Chapter of Device Emulator is relocated and rearranged.
54 The limitation of audio system device in chapter of
Device Emulator is deleted.
55 to 60 In Chapter 7, images and usage of I/O Simulator are
changed.
16 to 21
53 to 80
Microsoft Visual Studio 2008 is added to development
platform.
1.06 January 2009
73 to 80 In Chapter 9, the sample is updated.
17, 19,
29
Supported OS is added. ( Windows 7 / Windows 2008
Server )
57 Note is added at case of using Device Emulator after
Windows Vista OS
1.07 May 2010
20 Chapter 3.2 is modified.

6
Preface
This guide clearly and concisely sets out the information developers need to know to get started with
the CASIO IT-600 development. Every method of connecting to your development system is
covered and step by step instructions for installing and testing the CASIO SDKs are included.
The purpose of this guide is to get you to the point where you can start development; you should
refer to the library manuals for detailed information on the specific APIs.

7
1. Product Overview
1.1 Hardware Specifications
The IT-600 series handheld terminal is one of the most powerful and versatile handheld devices on
the market. It is particularly suited to the retail, stocktaking, parking enforcement and hospitality
markets.
Table 1.1 Hardware specifications
Item Specification Remark
CPU, Memory
CPU Marvell®PXA270 Application Processor Operating clock; max 520
MHz
RAM 64 MB
FROM 128 MB (user area; approx. 60 MB)
Scanner
Type Semi-conductor laser light
Wave Length 650±10 nm
Optical Output <1 mW
No. of scannings 100±20 times per second
Resolution 0.127 mm (minimum)
PCS 0.45 (minimum)
Approx. 400 mm Without HA-D50BN
attached
Readable distance
Approx. 0 to 200 mm With HA-D50BN attached
Max. 48 mm When the distance is at 40
mm.
Max. 314 mm When the distance is at 400
mm.
Readable width
Max. 60 mm (contact scanning) When HA-D50BN is
attached.
Daylight for scanning 50,000 Lux or less
Readable 1D bar code
symbologies
UPC-A, UPC-E, EAN, Codabar, Code39,
ITF, MSI, Industrial 2of5, Code93, Code128,
IATA, EAN128, RSS-14, RSS Limited, RSS
Expanded
Vibrator Yes (for indications of scanning completion,
Vo I p c a ll - i n )
Display
Display device 3.7-inch transflective TFT color LCD 65,536 colors (See note 3)
No. of dots 480 (h) x 640 (w)
Dot pitch 0.117 (h) x 0.117 (w) mm
Gradation 65,536 colors
Display font Scalable font
Backlight LED
Indicator
LED 1pc x LED (2 colors), 1pc x LED (3 colors) Left: battery charge status
Right: programmable
Input
Keyboard Numeric (Alphabet) keys, CLR key, Execute
key, Fn key, Text key, Cursor key
Control keys Power ON/OFF key, Reset switch
Trigger keys Trigger R key, Trigger L key, Center Trigger
key
Touch panel Yes
Continue.

8
Infrared communication interface
Standard IrDA ver.1.3 compatible
Communication
process
Half duplex
Synchronization Start-stop, frame method
Baud rate (in bps) 9600, 19200, 38400, 57600, 115200, 4M
Communication
range
0 (contact) to 0.3m
WLAN
Standard IEEE 802.11b/g compatible
Modulation DS: IEEE802.11b
DS/OFDM: IEEE802.11g See note 1.
Frequency range IEEE802.11b: 2.400 to 2.4835 GHz
IEEE802.11g: 2.400 to 2.4835 GHz
Baud rate IEEE802.11b: 11 Mbps (maximum)
IEEE802.11g: 54 Mbps (maximum)
Communication
range
IEEE802.11b/g: 50 m (indoor) to 150 m
(outdoor)
Vary depending on the
environment
Number of channels 13 Three channels are
available at the same time.
Output power IEEE802.11b: 12 to 15 dBm
IEEE802.11g: 12 to 14 dBm
Other feature Roaming between Access-Points
Bluetooth
Standard Bluetooth®Specification Ver.1.2 Not operable concurrently
with WLAN operation.
Comm. range Approx. 3 m Vary depending on the
environment
Output power Max. 3 dBm ( PowerClass 2)
USB
Full speed (12 Mbps)Baud rate
Low speed (1.5 Mbps)
Host
Power to an
external
device
5V±5% (maximum 500 mA) See IT-600 Series
Hardware Manual.
Client Baud rate Full speed (12 Mbps)
Extension port Connector for HA-D94CFU or for HA-D51TG Not applicable to
IT-600M30R, M30CR.
M30R2, M30CR2,
M30R2-CN, M30CR2-CN
SD card slot miniSD memory card In the battery
compartment.
Layout
12 3 4 5678
Terminals
for USB
cradle
Description See IT-600 Hardware Manual.
Headset jack 4 poles in rounded shape
Speaker Monaural
Microphone Monaural See note 2.
Digital camera
Number of pixels Approximately 1,000,000 pixels
Device 1/4.5-type CCD color
Aperture F3.5/F7.0 (2 steps switchover)
Focal distance f = 3.29 mm (fixed)
Image capture range 30 cm to ∞
LED light
Brightness 3300 mcd
Continue.

9
Power
Operation Lithium-ion battery pack (HA-D20BAT or
HA-D21LBAT)
Memory backup Lithium battery (rechargeable) on board
Battery capacity HA-D20BAT 1,850 mAH
HA-D21LBAT 3,700 mAH
IT-600M30, M30C,
M30-CN, M30C-CN,
M30E2, M30E2-CN,
M30C2, M30C2-CN
IT-600M30R,
M30CR,
M30R-CN,
M30CR-CN,
M30R2,
M30R2-CN,
M30CR2,
M30CR2-CN
Operating period
Approx. 11 hours
(with
HA-D20BAT)*1
Approx. 22 hours
(with
HA-D21LBAT)*1
Approx. 10 hours
(with
HA-D20BAT)*2
Approx. 20 hours
(with
HA-D21LBAT)*2
*1 based on the ratio of
“standby:calculation:scan” at
20:1:1 when the CPU speed is
set to auto power save mode
and the backlight is turned off.
*2 based on the ratio of
“standby:scan:calculation:wirel
ess” at 20:1:1:1 when the CPU
speed is set to auto power save
mode and the backlight is
turned off.
Memory backup
period
(with Lithium
battery only)
RAM : Approx. 10 minutes
Clock : Approx. 72 hours or longer
-Lithium battery is fully
charged.
-At room temperature.
Memory backup
period
(with Lithium
battery and
Lithium-ion battery
pack)
RAM : Approx. 72 hours with HA-D20BAT
RAM : Approx. 72 hours with
HA-D21LBAT
-After “VDET1” warning
message is issued.
Lithium-ion battery
pack charge period
Approx. 4 hours for HA-D20BAT
Approx. 7 hours for HA-D21LBAT
-The power on the terminal is
turned off.
-At room temperature
-The dedicated AC adaptor is
used to power the terminal
via battery charger or cradle.
Memory backup
battery charge
period
Approx. 4 days - Time period until when the
memory backup battery is
fully charged.
-Lithium-ion battery pack is
being installed.
-At room temperature.
Memory backup
battery rated
capacity
10 mAh
Power supply by
cradle
Yes
By battery pack
(when terminal’s
power on )
Yes
Method to charge
memory backup
battery
By battery pack
(when terminal’s
power off)
Yes

10
Notes:
1. Orthogonal frequency-division multiplexing (OFDM) is a transmission technique based upon
the idea of frequency-division multiplexing (FDM).
2. The microphone is not integrated in IT-600M30R2-CN and IT-600M30CR2-CN to comply
with the Chinese radio related regulations. Both the models disable the capability of voice data
transmission over Internet Protocol (VOIP).
3. Dead Pixels
The LCD panel employed in this product uses high precision and substantial number of
components which commonly cause a small number of the pixels not to light or to remain lit all
the time. This is due to the characteristics of LCD panel yield in accuracy over 99.99% and
permissible.

11
1.2 Library Configuration
The CASIO Software Development Kit (“SDK”) for IT-600 series provides various libraries listed
in the table.
Table 1.2
Library Description C++ VB
C#
System Library Library that is used to control the system. Yes Yes
Laser Scanner Library Library that is used to control the built-in laser scan engine. Yes Yes
Bluetooth Library Library that is used to control the built-in Bluetooth module. Yes Yes
Camera Library Library that is used to control the built-in Camera module. Yes Yes
Imager Library Library that is used to control the built-in CMOS imager. Yes Yes
JPEG Library Library that is used to handle and manipulate JPEG image
functions.
Yes -
FLINK Library Library that is used to control and carry out
transmission/reception of files between PC and other device.
Yes Yes
Note:
The abbreviations used in the table are;
C++ :Visual C++
VB :Visual Basic .NET
C# :Visual C# .NET
The names of the Dynamic Link Libraries for C++ and C#/VB for the device oriented libraries are
listed in the table.
Table 1.3
Library Dynamic Link Library Dynamic Link Library
(Class Library)
System Library SystemLib.dll SystemLibNet.dll
Laser Scanner Library OBReadLib.dll OBReadLibNet.dll
Bluetooth Library BluetoothLib.dll BluetoothLibNet.dll
Camera Library CameraLib.dll CameraLibNet.dll
Imager Library ImagerLib.dll ImagerLibNet.dll
JPEG Library JpegCe.dll None
FLINK Library FlinkLib.dll MoFlinkLib.dll

12
1.3 Development Reference Manuals
The CASIO Software Development Kit (“SDK”) for IT-600 series includes the development
reference manuals listed in the table.
Table 1.4
Development Manual Description
Quick Start Guide This reference manual.
Hardware Manual Reference manual that describes hardware specifications in detail on each
dedicated option and IT-300 handheld printer terminal
Software Manual Reference manual that describes software specifications in detail for all the
software integrated in IT-600 handheld printer terminal.
System Library Manual Reference manual that describes individual functions in detail for System
Library.
Laser Scanner Library Manual Reference manual that describes individual functions in detail for Laser
Scanner Library.
Bluetooth Library Manual Reference manual that describes individual functions in detail for Bluetooth
Library.
Camera Library Manual Reference manual that describes individual functions in detail for Camera
Library.
Imager Library Manual Reference manual that describes individual functions in detail for Imager
Library.
JPEG Library Manual Reference manual that describes individual functions in detail for JPEG
Library.
FLINK Library Manual Reference manual that describes individual functions in detail for FLINK
Library.

13
1.4 Sample Program
The following sample programs are included in the IT-600 SDK.
Table 1.5
Sample Program Description
Common Device Control
BLUETOOTHLIBSAMPLE Connects the terminal to a Bluetooth printer and prints out data.
CAMERALIBSAMPLE Takes pictures and displays them on the screen.
IMGLIBSAMPLE Scans bar codes using the Imager with settings set with Imager setting
file.
IMGLIBSAMPLE2 Program of IMGDemo.exe
OBRLIBSAMPLE Reads a bar code using the Laser library.
PRNLIBSAMPLE Prints out data on the built-in printer.
SYSTEMLIBSAMPLE Demonstrates LED and buzzer functions.
JPEG Library
JPEGSAMPLE Displays Jpeg files.
FLINK Library
FLINKLIBSAMPLE Demonstrate infrared communication via FLINK protocol between two
terminals.
Note:
Some of the sample programs such as IMGLIBSAMPLE, IMGLIBSAMPLE2, and
PRNLIBSAMPLE in the table do not run because the respective devices are not integrated in the
IT-600.

14
2. Prerequisites
2.1 Skills Required
The following skills are required by developers aiming to develop application software for the
IT-600:
•Windows programming
•A good knowledge of one or more of the following:
-Visual C++
-Visual Basic .NET
-Visual C#
-Active Server Pages and web programming (not covered in detail in this guide)
The following skills or experiences are also desirable:
•Windows CE devices
•ActiveSync
•Some networking experience

15
2.2 Hardware Required
The following models of the IT-600 series and the dedicated options are available.
•IT-600
Table 2.1 Available models and the features
Wireless Communication
Model no. Laser
scanner Bluetooth IEEE802.11b/g
Digital
Camera Remark
IT-600M30 * Yes Yes No No
IT-6 00M30C * Yes Yes No Yes
IT-6 00M30R * Yes Yes Yes No
IT-6 00M30CR * Yes Yes Yes Yes
See note 1.
IT-600M30E2 Yes Yes No No
IT-6 00M30C2 Yes Yes No Yes
IT-6 00M30R2 Yes Yes Yes No
IT-6 00M30CR2 Yes Ye s Yes Yes
IT-600M30E2-CN Yes Yes No No
IT-6 00M30C2-CN Yes Yes No Yes
IT-6 00M30R2-CN Yes Yes Yes No
IT-6 00M30CR2-CN Yes Yes Yes Yes
See note 2.
Notes:
1. The model with “*” will phase out as soon as its stock runs out, and be replaced by its
successor model with “2” at the end of the model number.
2. “-CN” in the “Model” boxes denotes that the model is dedicated for China only.
•Dedicated Options
- HA-D20BAT (Battery Pack)
- HA-D21LBAT (Large-capacity Battery Pack)
- AD-S15050BE (AC Adaptor for HA-D30CHG Cradle-type Battery Charger)
- AD-S42120B (AC Adaptor for HA-D60IO USB Cradle and HA-D62IO Ethernet Cradle)
- AD-S60160BE (AC Adaptor for HA-D36DCHG Cradle-type Dual Battery Charger)
- DT-380USB (USB cable)
- HA-D50BN (Laser Redirection Attachment)
- HA-D60IO (USB Cradle)
- HA-D62IO (Ethernet Cradle)
- HA-D30CHG (Cradle-type Battery Charger)
- HA-D32DCHG (Dual Battery Charger)
- HA-D36DCHG (Cradle-type Dual Battery Charger)
- HA-D51TG (Trigger Grip)
- AC-CORD-EU (Power cord for AD-S42120B/Europe)
- AC-CORD-US (Power cord for AD-S42120B/USA and Canada)
- AC-CORD-TW (Power cord for AD-S42120B/Taiwan)
- AC-CORD-KR (Power cord for AD-S42120B/Korea)
- AC-CORD-AU (Power cord for AD-S42120B/Australia)
See the following page for each external view of the IT-600 and the dedicated options.

16
External views of the IT-600 and the options
Figure 2.1
USB Cradle / Ethernet Cradle
H
A
-D60IO
HA-D62IO

17
2.3 Software Required
PC Operating System
•Microsoft Windows 2000 Professional Service Pack 4 or later
•Or Microsoft Windows 2000 Server Service Pack 4 or later
•Or Microsoft Windows XP Professional Service Pack 2 or later
•Or Microsoft Windows 2003 Server Service Pack 1 or later
•Or Microsoft Windows Vista (Business / Ultimate )
•Or Microsoft Windows 7
•Or Microsoft Windows Server 2008
The following software tools and libraries are required in order to develop software for the IT-600.
Ensure that you download or purchase the correct Microsoft tools as appropriate.
C / C++
•Microsoft Visual Studio 2008 (not free of charge)
•Microsoft Visual Studio 2005 (not free of charge)
•Microsoft eMbedded Visual C++ 4.0
Download for free from;
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1DACDB3D-
50D1-41B2-A107-FA75AE960856
•Microsoft eMbedded Visual C++ 4.0 SP4
Download for free from;
http://www.microsoft.com/downloads/details.aspx?familyid=4A4ED1F4-91D3-4DBE-986E-
A812984318E5&displaylang=en
•Microsoft ActiveSync 4.2 (or later)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?FamilyID=7269173a-28bf-4cac-a682-58d
3233efb4c&DisplayLang=en
•Microsoft Windows Mobile Device Center 6.1 (for Windows Vista)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?familyid=46F72DF1-E46A-4A5F-A791-0
9F07AAA1914&displaylang=en
Visual Basic / Visual C#
•Microsoft Visual Studio 2008 (not free of charge)
•Microsoft Visual Studio 2005 (not free of charge)
•Microsoft Visual Studio .NET 2003 (not free of charge)
•Windows CE Utilities for Visual Studio .NET 2003 Add-on Pack 1.1
From Microsoft web site, see
http://www.microsoft.com/downloads/details.aspx?familyid=7ec99ca6-2095-4086-b0cc-7c6c
39b28762&displaylang=en
•Microsoft ActiveSync 4.2 (or later)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?FamilyID=7269173a-28bf-4cac-a682-58d
3233efb4c&DisplayLang=en
•Microsoft Windows Mobile Device Center 6.1 (for Windows Vista)
Download for free from;

18
http://www.microsoft.com/downloads/details.aspx?familyid=46F72DF1-E46A-4A5F-A791-0
9F07AAA1914&displaylang=en

19
3. Installing SDK to PC
3.1 Application Development
This chapter explains about what you need to set up for the development environment before
starting your application development.
1. Installing Development Platform
Install Microsoft’s development platform which supports eMbedded Visual C++, Visual Studio
2005 and Visual Studio .NET 2003. For detail, refer to Chapter 2.3 “Software Required”.
2. Installing CASIO SDK
Install CASIO SDK and various libraries if necessary. For installation method, refer to Chapter
6.1 “Installing CASIO SDK Files”.
3. Connecting IT-600 to PC (via ActiveSync/Windows Mobile Device Center)
Connect the IT-600 to PC via Microsoft’s ActiveSync (for Windows XP or any other OS
before Windows XP) or via Windows Mobile Device Center (for Windows Vista or later). For
connection method, refer to Chapter 5 “Connecting the IT-600 to PC”.
4. Setting Up the Development Environment
Copy all necessary CASIO libraries to the IT-600.
For detail, refer to Chapter 6 “Setting Up the Development Environment”.
5. Installing the Device Emulator
Install the Device Emulator for the IT-600. For installation method, refer to Chapter 7 “Device
Emulator”. If not necessary to install, go to the next step “6. Application Development” below.
6. Application Development
Now, the application development environment is set up and your development with the
development platform can be started. After application is developed, transfer it to the Device
Emulator or an actual terminal of the IT-600 via ActiveSync or Windows Mobile Device
Center for check on the operability. For application development method and transferring your
application, refer to Chapters 8 “eMbedded Visual C++” and 9 “Visual Studio”.

20
3.2 Installing CASIO SDK Files
Download the CASIO IT-600 SDK installation CD image file from the following site and write it to
a CD-ROM media.
http://www2.casio.co.jp/system_en/pa/PADealer/
(The site requires your user name and password. Enter your user name and password as issued by
CASIO.)
Notes:
•If you had already installed IT-600 SDK Ver. 1.xx, be sure to uninstall it before installing Ver.
2.xx.
•If any file of the IT-600 SDK Ver. 1.xx is remained in the following folders after uninstalling,
delete it manually.
C:\Program Files\CASIO\MBSYS
C:\Program Files\Windows CE Tools\wce500
•If your PC runs in the Windows Vista or later OS, first you must disable the User Account
Control (“UAC”) by following the process below before installing the CASIO SDK Files.
Case of using Windows Vista and Windows Server 2008
-Navigate to Control Panel →User Accounts →Enable or Disable the User
Account Control. Remove the check on User Account Control (UAC) to protect
your PC, and then click OK button.
Case of using Windows 7
-Navigate to Control Panel →User Accounts →Change User Account Control
Settings. Select Never notify in Choose when to be notified about changed to your
computer setting.