Honeywell Dolphin 9900 User manual

Dolphin®9900 Mobile Computer
with Windows Mobile
®
6.0
User’s Guide–Preliminary

Disclaimer
Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the reader should in all cases consult
Honeywell to determine whether any such changes have been made. The information in this publication
does not represent a commitment on the part of Honeywell.
Honeywell shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated into another language without the
prior written consent of Honeywell.
2008 Honeywell International Inc. All rights reserved.
Web Address: www.honeywell.com/aidc
Trademarks
Dolphin, Dolphin RF, HomeBase, Mobile Base, and QuadCharger are trademarks or registered
trademarks of Hand Held Products, Inc. or Honeywell International Inc.
Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.
Patents
Please refer to the product packaging for a list of patents.
Other Trademarks
he Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell.

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
iii
Chapter 1 - Agency Information
Label Locations ................................................................................................................... 1-1
Regulatory and Safety Approvals for all Dolphin Terminals
............................................... 1-2
FCC Compliance ................................................................................................................. 1-3
Chapter 2 - Getting Started
Using the Dolphin Terminal for the First Time ..................................................................... 2-1
Today Screen ...................................................................................................................... 2-5
Navigation Bar and Start Menu ........................................................................................... 2-5
Pop-Up Menus..................................................................................................................... 2-6
Chapter 3 - Hardware Overview
Standard Terminal Configurations....................................................................................... 3-1
Dolphin 9900 Series Peripherals ......................................................................................... 3-2
Dolphin 9900 Series Accessories........................................................................................ 3-3
Front Panel Features........................................................................................................... 3-4
Back Panel Features ........................................................................................................... 3-6
Side Panel Features ............................................................................................................ 3-8
Bottom Panel Features........................................................................................................ 3-9
I/O Connector ................................................................................................................ 3-9
ActiveSync Communication............................................................................................... 3-10
Using the Touch Panel ...................................................................................................... 3-13
Installing Your Screen Protector.................................................................................. 3-13
Batteries ............................................................................................................................ 3-15
Main Battery Pack........................................................................................................ 3-15
Storing Batteries .......................................................................................................... 3-15
Guidelines for Battery Use and Disposal..................................................................... 3-15
Internal Backup Battery ............................................................................................... 3-17
Managing Battery Power ............................................................................................. 3-18
Default Critical and Low Battery Points ....................................................................... 3-18
Checking Battery Power .............................................................................................. 3-19
Resetting the Terminal ...................................................................................................... 3-20
Soft Reset (Warm Boot)............................................................................................... 3-20
Hard Reset (Cold Boot) ............................................................................................... 3-20
Suspend Mode .................................................................................................................. 3-20
Chapter 4 - Using Scan Image Engine
Overview.............................................................................................................................. 4-1
Image Engine Specifications ............................................................................................... 4-1
Bar Code Symbologies Supported ..................................................................................... 4-2
Decoding ............................................................................................................................. 4-3
To Decode a Bar Code.................................................................................................. 4-3
Scanning Position Options............................................................................................. 4-4
Capturing Images ................................................................................................................4-5
Taking an Image............................................................................................................ 4-5
Uploading Images.......................................................................................................... 4-6
Chapter 5 - Using Dolphin Keyboards
Table of Contents

iv Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Keyboard Options................................................................................................................5-1
Common Buttons........................................................................................................... 5-1
Keyboard Combinations ................................................................................................ 5-1
Using the Function Keys...................................................................................................... 5-2
Using the Modifier Keys ...................................................................................................... 5-2
Using the Navigation Keys .................................................................................................. 5-4
Sticky Key Functionality................................................................................................. 5-4
43-Key Alpha/Numeric Keyboard ........................................................................................ 5-6
43-Key Blue Key Combinations .................................................................................... 5-7
43-Key Red Key Combinations ..................................................................................... 5-7
43-Key Num Lock Key Combinations?????????.......................................................... 5-9
56-Key Full Alpha/Numeric Keyboard ............................................................................... 5-10
56-Key Blue Key Combinations .................................................................................. 5-10
56-Key Red Key Combinations ................................................................................... 5-11
56-Key SFT Key Combinations??????? .................................................................... 5-13
General Windows Keyboard Shortcuts ............................................................................. 5-14
Chapter 6 - Settings
Overview.............................................................................................................................. 6-1
Personal Tab ....................................................................................................................... 6-2
Buttons .......................................................................................................................... 6-3
Input Panel Options ...................................................................................................... 6-4
Menus–Modifying the Start Menu ................................................................................. 6-5
Notifications ...................................................................................................................6-6
System Tab ......................................................................................................................... 6-7
About ............................................................................................................................. 6-7
Backlight ........................................................................................................................ 6-8
Clock.............................................................................................................................. 6-8
Memory..........................................................................................................................6-9
Power...........................................................................................................................6-11
Remove Programs....................................................................................................... 6-12
Screen ......................................................................................................................... 6-13
Chapter 7 - Wireless Communication
Connections Tab .................................................................................................................7-1
Using Infrared ...................................................................................................................... 7-2
IrDA Port Location ......................................................................................................... 7-2
Sending Data................................................................................................................. 7-2
Receiving Data .............................................................................................................. 7-3
Connections Manager ......................................................................................................... 7-4
To Access the Connections Manager:........................................................................... 7-4
Task Tab........................................................................................................................7-4
Advanced Tab................................................................................................................ 7-5
Dolphin Wireless Manager .................................................................................................. 7-6
Dolphin Wireless Manager Window............................................................................... 7-6
Enabling the Radios....................................................................................................... 7-6
Accessing Radio Configuration Utilities......................................................................... 7-7

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
v
Installing Additional Software .............................................................................................. 7-8
Adding Programs to the Terminal Using ActiveSync ..................................................... 7-8
Adding Programs Directly from the Internet................................................................... 7-9
COM Port Assignment Table ............................................................................................ 7-10
Chapter 8 - Working with GSM (Only for HD59900LUP)
Overview.............................................................................................................................. 8-1
Quad Band Antenna ...................................................................................................... 8-1
SIM Card Installation ...........................................................................................................8-2
Enabling the GSM Radio ..................................................................................................... 8-3
Voice Communication.......................................................................................................... 8-4
Audio Modes.................................................................................................................. 8-4
Volume Control.............................................................................................................. 8-4
Accessing the Dialer Window ........................................................................................ 8-4
Dialing............................................................................................................................ 8-4
Sending Calls................................................................................................................. 8-5
Ending Calls................................................................................................................... 8-5
Keyboard Combinations for Calls .................................................................................. 8-5
View Options.................................................................................................................. 8-5
Setup Options...................................................................................................................... 8-6
Data Communication ........................................................................................................... 8-7
Establishing Data Communication................................................................................. 8-7
Ending the Data Connection.......................................................................................... 8-9
Chapter 9 - Working with Bluetooth
Enabling the Bluetooth Radio .............................................................................................. 9-1
Connecting to Other Bluetooth Devices .............................................................................. 9-2
Types of Devices and Services ........................................................................................... 9-5
Transferring Files Via Bluetooth .......................................................................................... 9-6
Making the Terminal Discoverable ...................................................................................... 9-7
Connecting to Bluetooth Printers......................................................................................... 9-7
Pairing with Bluetooth Devices??? ...................................................................................... 9-7
Trusted and Untrusted Devices??? ..................................................................................... 9-7
Chapter 10 - Dolphin HomeBase
Overview............................................................................................................................ 10-1
Dolphin HomeBase Parts and Functions........................................................................... 10-2
Powering the HomeBase................................................................................................... 10-4
HomeBase Serial Connector ............................................................................................. 10-5
Charging the Main Battery................................................................................................. 10-6
To Power a Terminal and Charge its Main Battery...................................................... 10-6
Charging a Spare Battery in the Auxiliary Battery Well ............................................... 10-6
Communications................................................................................................................ 10-7
To Install the HomeBase for Communication .............................................................. 10-7
Establishing Communication with the HomeBase ....................................................... 10-7
Communicating with the Dolphin Terminal ........................................................................ 10-8
Verifying Data Transfer................................................................................................ 10-8
RS-232 Communications Cables ...................................................................................... 10-9
RS-232 Pin Configuration............................................................................................ 10-9

vi Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Mounting the HomeBase ................................................................................................. 10-10
Chapter 11 - Dolphin Mobile Base
Overview............................................................................................................................ 11-1
Mobile Base Parts and Functions...................................................................................... 11-2
Powering the Dolphin Terminal ......................................................................................... 11-4
Charging the Dolphin Terminal.......................................................................................... 11-4
Installing the Dolphin Mobile Base .................................................................................... 11-5
Establishing Communication with the Mobile Base ........................................................... 11-7
To Install the Mobile Base for Communication ............................................................ 11-7
Establishing ActiveSync Communication with the Mobile Base .................................. 11-7
Chapter 12 - Dolphin ChargeBase
Overview............................................................................................................................ 12-1
Dolphin ChargeBase Parts and Functions ........................................................................ 12-2
Supplying Power to the ChargeBase................................................................................. 12-4
Inserting and Removing Terminals.................................................................................... 12-4
Charging Terminals in the ChargeBase ............................................................................ 12-5
Mounting the ChargeBase................................................................................................. 12-5
Chapter 13 - Dolphin QuadCharger
Overview............................................................................................................................ 13-1
Dolphin QuadCharger Parts and Functions....................................................................... 13-2
Supplying Power to the QuadCharger............................................................................... 13-3
Inserting and Removing Battery Packs ............................................................................. 13-4
Charging Batteries in the QuadCharger ............................................................................ 13-4
Using the Battery Analyzer ................................................................................................ 13-5
Mounting the QuadCharger ............................................................................................... 13-6
Desk Mounting............................................................................................................. 13-6
Troubleshooting.................................................................................................................13-8
Chapter 14 - Customer Support
Product Service and Repair............................................................................................... 14-1
Technical Assistance......................................................................................................... 14-2
Limited Warranty ............................................................................................................... 14-3

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
1 - 1
1
Agency Information
Label Locations
Dolphin 9900 mobile computers meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these guidelines
carefully before using your Dolphin mobile computer.
Laser Safety Label
If the following label is attached to your product, it indicates the product
contains a laser engine or laser aimer:
Laser Eye Safety Statement: This device has been tested in accordance with
and complies with EN60825-1: 1993+A1+A2 and 21 CFR 1040.10 and
1040.11, except for deviations pursuant to Laser Notice No. 50, dated
July 26, 2001. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2
LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
Caution - use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
LED Safety Statement
This device has been tested in accordance with IEC60825-1 LED safety and has been certified to be
under the limits of a Class 1 LED device.
The maximum power outputs for each diode are as follows:
• Illumination LED: 194.0 uW
• Aimer laser (5300 engine): 360.1 uW
• Aimer LED (5100 engine): 81.6 uW
Infrared LED Safety Statement
Caution - Class 1M LED radiation when open. Do not view directly with optical instruments.
The maximum power outputs for the IR LED is 145.1 uW.
UL and cUL Statement
UL and cUL listed: UL60950-1 and CSA C22.2 No. 60950-1-03.
Compliance
Label Laser Safety Label
LASER LIGHT. DO NOT STARE INTO BEAM
1.0 mW MAX OUTPUT: 650nM
IEC60825-1:1993+A1+A2
CLASS 2 LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.1 1
except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001.

1 - 2 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Regulatory and Safety Approvals for all Dolphin Terminals
The CE Mark on the product indicates that the system has been tested to and conforms with the
provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/
EEC and 93/68/EEC Low Voltage Directive.
For further information, please contact:
Hand Held Products BV, a wholly owned subsidiary of Honeywell International Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
Hand Held Products shall not be liable for use of our product with equipment (i.e., power supplies,
personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
Dolphin 9900 802.11b/g (WLAN), Bluetooth, and/or GSM
Dolphin 9900 RF terminals are designed to comply with the most current applicable standards on safe
levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) and has been recommended for adoption by the Federal
Communications Commission (FCC).
Parameter Specification
U.S.A.
Canada
European Community
FCC Part 15, Class B
ICES-003
EN 55022 (CISPR 22) Class B
EN60950:2000
EN60825-1:1994 + A11 + A2
EN55024:1998

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
1 - 3
FCC Compliance
Dolphin terminals comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Dolphin RF Terminal—802.11b/g (WLAN), Bluetooth, and/or GSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet helpful: “Something About Interference.”
This is available at FCC local regional offices. Our company is not responsible for any radio or television
interference caused by unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by our company. The correction is the
responsibility of the user. Use only shielded data cables with this system.
In accordance with FCC 15.21, changes or modifications not expressly approved by Hand Held Products,
Inc. may void the FCC authorization to operate the equipment.
CAUTION! Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when
used with the Hand Held Products Dolphin accessories supplied or designated for this product. Use of
other accessories may not ensure compliance with FCC RF exposure guidelines.

1 - 4 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
RF, Regulatory, and Safety Agency Approvals—802.11b/g (WLAN), Bluetooth, and/or
GSM
R&TTE Compliance Statement—802.11b/g (WLAN), Bluetooth, and/or GSM
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC). This equipment has been assessed to the following standards as applicable:
This product is marked with in accordance with the Class II product requirements specified
in the R&TTE Directive, 1999/5/EC.
The equipment is intended for use throughout the European Community. PAN European Frequency
Range: 2.402—2.480 GHz.
Restrictions in France are as follows:
• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400—2.4835 GHz
• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400—2.454 GHz band and maximum
power (EIRP*) of 10 mW for the 2.454—2.483 GHz band
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) installed outdoors
is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
For European Community Users
Hand Held Products complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It may contain
hazardous substances that could impact health and the environment, if not properly disposed.
ParameterM Specification
U.S.A.
Canada
FCC Part 15.247
RSS 210
Parameter Specification
R&TTE EN 300 328-2:2000
EN 301 489-1 (2002-08)
EN 301 489-17 (2002-08)
EN 60950:2000
EN 50361:2001

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
1 - 5
In order to avoid the dissemination of those substances in our environment and to diminish the pressure
on the natural resources, we encourage you to use the appropriate take-back systems for product
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a
sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along
with municipal waste and invites you to use the appropriate separate take-back systems for product
disposal.
If you need more information on the collection, reuse, and recycling systems, please contact your local or
regional waste administration.
You may also contact your supplier for more information on the environmental performances of this
product.
Pacemakers, Hearing Aids and Other Electrically Powered Devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires
devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to
1000MHz. The maximum allowable field strength emitted by the Dolphin is 0.3V/m according to Subpart
B of Part 1 of the FCC rules. Therefore, the Dolphin RF has no effect on medical devices that meet the
IEC specification.
Microwaves
The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven.
Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance
degradation in your wireless network. However, both your microwave and your wireless network will
continue to function. The Dolphin Batch terminal does not contain a radio, and therefore, is not affected
by microwave ovens.

1 - 6 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
2 - 1
2
Getting Started
Using the Dolphin Terminal for the First Time
1. Unpack the Carton and Verify its Contents (see page 2-1)
2. Install the Main Battery Pack (see page 2-2)
3. Charge the Main and Backup Batteries (see page 2-2)
4. Initialize the Mobile Computer (see page 2-2)
5. Let Autoinstall Run (see page 2-3)
6. Set the Time and Date (see page 2-3)
7. Verify Imaging and Decoding with Demos (see page 2-4)
Step 1. Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
• Dolphin 9900 Series mobile computer (the terminal)
• Main battery pack (7.4v Li-ion)
• Microsoft Companion CD
• Dolphin 9500 Quick Start Guide
Note: If you ordered accessories for your terminals, verify that they are also included with the order.
Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned
for service. For details, see Product Service and Repair on page 14-1.
Hand Strap
The Dolphin 9900 ships with the hand strap installed and fastened to the
bottom panel with a clip; see Bottom Panel Features on page 3-9. To
install the battery pack, you must detach the hand strap.
To detach the hand strap, push the hand strap clip down and away from
the terminal. Move the strap up and away from the bottom panel.
To re-attach the hand strap, slide the clip back into place on the bottom
panel.

2 - 2 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Step 2. Install the Main Battery Pack
Use only the Li-ion battery packs provided by Hand Held Products. Use of any
battery not sold/manufactured by Hand Held Products may damage the terminal
and/or the battery, may pose a personal hazard to the user, and will void the
warranty.
1. Unpack the Li-ion battery pack. Hold the terminal with the front
panel (keyboard) facing down.
2. Take the battery and insert the end without the locking tab into
the top of the battery well and push down with a hinging motion
until the locking tab snaps.
To Remove the Main Battery Pack
Put the terminal in suspend mode (see page 3-20). Press the locking
tab on the battery pack away from the bottom panel, and pull the
battery pack up with a hinging motion.
Step 3. Charge the Main and Backup Batteries
The power supply for the Dolphin mobile computer consists of two types of battery power: the main battery
pack installed on the back panel and the backup battery that resides inside the terminal.
The main battery powers the terminal. The internal backup battery charges off the main battery and
maintains the application data stored in RAM and system clock for up to 30 minutes when the terminal’s
main battery pack is completely discharged or removed.
Before Initial Use The terminals are shipped with both batteries discharged of all power. Charge the main battery pack
for a minimum of four hours before initial use.
Time to Charge Four hours for the main battery pack, eight hours for the internal backup battery the first time.
Use only Dolphin 9900 Series peripherals, power cables, and power adapters. Use of peripherals, cables, or power adapters not
sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.
Charging with Dolphin Peripherals
When the battery is installed in the terminal, you can insert the terminal into any one of the following
peripherals to charge the main battery pack:
•Dolphin HomeBase (see page 10-1)
•Dolphin Mobile Base (see page 11-1)
•Dolphin ChargeBase (see page 12-1)
• Dolphin Net Base
• Dolphin Charging/Communication Cable
To fully charge the Li-ion battery before installing it in the terminal, use the
•Dolphin QuadCharger (see page 13-1)
•Auxiliary Battery Well of the Dolphin HomeBase (see page 10-6)
Step 4. Initialize the Mobile Computer
1. Wake the terminal by pressing the POWER or SCAN key. The decode LED lights and the scan LED
blinks for approximately three seconds. Do NOT press any keys while the terminal is initializing.
!
!

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
2 - 3
2. The terminal initializes and the splash screen displays for a few seconds. The Build numbers
indicate the software version.
3. The system performs a hard reset. When the display activates again, follow the instructions that
appear.
Step 5. Align the Screen
You are prompted to align the screen by tapping the target five times. Use the stylus provided by
Honeywell.
• Alignment should always be performed with a stylus designed for touch panel applications. The small
point is required for accurate calibration.
• Press the stylus firmly into the center of the cross-hair target once and release. Do not “double-tap” the
target.
• You can re-align the screen at any time by going to Start > Settings > System tab > Screen.
Step 6. Let Autoinstall Run
For each program that loads, a status bar indicates that the program is loading. Autoinstall occurs after
each hard reset. Do NOT touch the keyboard or the screen while programs are loading. All configurations
of the Dolphin terminal install Demos and Power Tools. If the terminal is configured with a wireless radio,
the appropriate radio drivers and utilities for each radio install.
After Autoinstall is complete, the terminal performs a soft reset automatically. When it finishes booting up
after the soft reset, the Today screen appears; see Today Screen on page 4-2.
Step 7. Set the Time and Date
You need to re-set the time and date after every hard reset of the terminal. It is a good idea to set the time
and date now before you begin using the device.
9.XX/9.XX/9.XX/9.XX
KeyboardBootloader
Kernel
Initial
Program
Loader (IPL)

2 - 4 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
On the Today screen, tap the line that displays the time and date,
The Clock Settings screen appears.
The time zone defaults to GMT-5 Eastern US; tap the arrow to the right of GMT-5 Eastern US to select
another time zone. Set the correct time and date in the remaining fields and tap OK to save.
Step 8. Verify Imaging and Decoding with Demos
Dolphin terminals come loaded with Demos you can use to verify imaging and decoding. For more
information about taking an image, see Using the Image Engine on page 4-4.

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
2 - 5
Today Screen
After the Dolphin terminal initializes the first time, you see the Today screen.
You can also display the Today screen anytime by tapping Start and then Today.
Navigation Bar and Start Menu
The Navigation bar is located at the top of the screen that displays the active program and current time.
It also provides access to the Start menu, which allows you to open programs and access the system
settings.
Command Bar
Use the Command bar at the bottom of application screens and contain menus that change according to
the open application. Just above the command bar is the task tray, which contains icons for programs that
are running in the background.
Tap to see to customize your terminal
Tap a program you have recently used
Tap to see additional programs
Start menu
Tap to open a program
Menus
Task tray: This section of the
Today screen shows icons on
programs that are running in
the background.

2 - 6 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Pop-Up Menus
With pop-up menus, you can quickly choose an action for a selected item. To access a pop-up menu, tap
and hold the stylus on the item name of the action you want to perform the action. When the menu
appears, lift the stylus, and tap the action you want to perform.
Tap anywhere outside the menu to close the menu without performing an action.
Selecting Programs
To see additional programs loaded on your terminal, tap Start > Programs. The Programs screen displays
the programs that are not listed on the Start menu. To open a program, tap once on the icon.
Note: Some programs have abbreviated labels underneath the icon. To see the full spelling of an abbreviated label, tap and hold
the stylus on the label. Drag the stylus off the label so that the command is not carried out.
File Explorer
You can also use the File Explorer to find files and organize these files into folders. Tap Start > Programs
> File Explorer.
Tap the Up button at the bottom of the screen to move up one level in the directory.
You can move files in File Explorer by tapping and holding on the item you want to move, and then tapping
Cut or Copy and Paste on popup menus.
Search
The Search feature on your Dolphin terminal helps you quickly locate information. Tap Start > Programs
> Search .
Enter the text you want to find, select a data type, and then tap Go to start the search. To quickly find
information that is taking up storage space, select Larger than 64 KB in the Type drop-down field.

Dolphin® 9900 Mobile Computer User’s
Guide–Preliminary
Rev (a) 02
3/5/08
3 - 1
3
Hardware Overview
Standard Terminal Configurations
Dolphin 9900 Dolphin 9900
• Microsoft Windows Mobile 6.0
• Intel XScale PXA27x 624 MHz
• 256MB RAM X 1GB Flash
• One of three in-mold, hard-top keyboard
options
• 2400mAh Extended life main battery
• One of 5100SR/SF/HD or 5300SR/SF/HD
image engines
• WLAN (802.11b/g)
•radio
•radio
• Microsoft Windows Mobile 6.0
• Intel XScale PXA27x 624 MHz
• 256MB RAM X 1GB Flash
• One of three in-mold, hard-top keyboard
options
• 2400mAh Extended life main battery
• One of 5100SR/SF/HD or 5300SR/SF/HD
image engines
•radio
•radio
•radio

3 - 2 Rev (a) 02
3/5/08
Dolphin® 9900 Mobile Computer
User’s Guide–Preliminary
Dolphin 9900 Series Peripherals
Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal.
Dolphin HomeBase
™
The Dolphin HomeBase charging and communication cradle supports both RS-232 and USB
communications, which enable it to interface with the majority of PC-based enterprise systems. When a
terminal is seated in the HomeBase, its main battery pack charges in less than four hours. In addition, the
HomeBase contains an auxiliary battery well that charges a spare Li-ion battery.
For more information, see Dolphin HomeBase on page 10-1.
Dolphin Mobile Base
™
The Dolphin Mobile Base charging and communication cradle is designed specifically for in-premise and
in-transit data collection applications. It features a flexible mounting bracket, a cigarette lighter adapter or
power cable to adapt it to your environment.
When a terminal is seated in the Mobile Base, its main battery pack charges in less than four hours. The
serial connector supports RS-232 communication and power out to peripheral devices, such as hand held
scanners.
For more information, see Dolphin Mobile Base on page 11-1.
Dolphin ChargeBase
The Dolphin ChargeBase is a four-slot charging cradle that holds, powers, and charges a terminal in each
slot.
For more information, see Dolphin ChargeBase on page 12-1.
Dolphin Net Base
The Dolphin Net Base is a four-slot charging/communication cradle that holds, powers, charges, and
communicates with the terminal in each slot. Ethernet communication occurs via statically and
dynamically-assigned IP addresses.
For more information about the Dolphin Net Base, please consult the Dolphin 9900 Series Net Base Quick
Start Guide.
Dolphin QuadCharger
™
The Dolphin QuadCharger is a four-slot charging station for Dolphin Li-ion battery packs. It can charge
each battery in less than four hours. The fourth slot features a battery analyzer that completely resets and
re-calibrates a battery and displays its resulting capacity.
For more information, see Dolphin QuadCharger on page 13-1.