Casper 50UG6100 User manual

Product............................................3
Power and Plug...............................3
Power Cord and Signal Cable..........3
Use Environment............................3
Cleaning...........................................3
Hanging the TV Set on the Wall......3
Display & Sound............................10
TV..............................................10
Channels Setup.............................10
External Inputs..............................11
Picture & Display ..........................11
Sound ...........................................11
Smart Zone ...................................12
System...........................................12
the set.
ct
•
openings on the back cover.
• Do not push objects of any kind into this
unit through the cabinet slots as they could
touch the current carrying parts or
shock, or damage to the unit.
•
may cause damage. There are no parts
inside you can service by yourself. Refer all
• Do not touch the screen surface with
screen
• Do not impact the TV screen with hard
pressure as this may damage the TV screen
severely.
• Unplug the set under the following
-If the set will not be used for a long period
- If the power cord or the power outlet/plug
is damaged.
adjust the product. Adjust those controls
other controls may result in damage. If this
happens, unplug the set and refer to the
service personnel.
- If the set is subject to impact or has been
dropped to have the cabinet damaged.
• Do not allow anything to rest on or roll
over the power cord and the signal cable.
• Protect the power cord and the signal
cable from being trampled.
• Do not overload the power cord or the
power outlet.
• Do not expose the power cord and the
signal cable to moisture.
• Do not place the set on an unstable cart,
stand, or table.
• Place the set on a place that allows good
• Do not use the set near damp, and cold
• Keep the set away from direct sunlight.
• Apparatus shall not be exposed to
with liquids, such as vases, shall be placed
on the apparatus.
• Do not use the set near dust place.
• Dust the set by wiping the screen and the
special liquid cleaner.
• Do not apply excessive force to the screen
when cleaning.
• Do not use water or other chemical
cleaner to clean the screen as this may
damage the surface of the TV screen..
people.
• Check that the wall can support the weight
of the TV set and wall mount assembly.
•
with the wall mount.
wall.
• Make sure to use only screws suitable for
the material of the wall.
• Make sure that the TV set cables are
placed so that there is not danger of
tripping over them. .
0302EN EN
Table of Contents Chapter 1: Introduction

menu controls..
Increase/decrease the volume.In the menu
controls..
Turn the TV on or standby.The TV is
on,press it, brings up the main menu or
press to return to the previous menu.
Before enter menu, long press it for three
seconds to display the Source Select..
Note:
sockets on the TV may vary according to TV
model, and not all sockets available on all
models.
sets are also applicable here.
children, can be avoided by taking simple
• Using cabinets or stands recommended by
the manufacturer of the television.
• Only using furniture that can safely
support the television.
• Ensuring the television is not overhanging
• Not placing the television on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the television to a suitable support.
• Not standing the television on cloth or
other materials placed between the
climbing on furniture to reach the television
or its controls.
Note: Graphics contained within this
exposed to excessive heat such as
Note:
Scan up/down through the channel list. In
the menu system, they act like the up/down
available via the menus that appear on the
screen. The remote control supplied with your
set can be used to navigate through the menus
Note: -
-
These USB sockets can be
used to connect an USB
device.
Note:
external modem or network
access equipment
Lets you connect a coaxial to
receive the signal from your
antenna, cable or cable box.
This output can be used to
audio receiver.
can be used to connect a PC
installed, certain DVD
players
digital satellite
decoder.This
socket provides an
uncompressed
digital connec-
and audio data by way of an
integrated mini-plug cable.
Allow you to connect
earphones to listen to the
sound coming from the TV.
Note:
The AV IN sockets can be
used to connect a range of
equipment, including video
recorders, camcorders,
decoders, satellite receivers,
DVD players, or games
consoles. The VIDEO IN
socket provides composite
0504EN EN

This is a Bluetooth remote control and before using it, please
NOTE: If you wait more than 2 minutes and it can’t pair,
please repeat the above steps for pairing again.
Press to choose ,and then press OK to enter.
chooe the Bluetooth remote name to enter next steps.
EN EN
.
RC pairing
Please press OK and HOME at the same me.
Keep RC and TV within 1 meter.
Youcanacvatevoicecontrol.
OK
OK
+
HOME
0706EN EN
to switch on your TV set and the remote
control before going on to following pages
describing how to use the channel set-up
procedure.
control.
- Make sure you use the correct polarity.
open them, as this could cause
them to leak or explode.
control if you are not using it for a long
2. Connect the power cable to the
television, to a mains socket.
the television, please only connect the
power cable to the mains socket.)
• If your TV is connected to an AC supply.
Your TV set should only be connected to an
AC supply. It must not be connected to a DC
supply. If the plug is detached from the
cable, do not, under any circumstances,
connect it to a mains socket, as there is a
risk of electric shock.
• If your TV is connected to a DC supply.
Your TV set should only be connected to a
DC supply. It must not be connected to a AC
supply. If the plug is detached from the
cable, do not, under any circumstances,
connect it to a mains socket, as there is a
risk of electric shock.
3. Connect an outside aerial to the ANTENNA
IN socket at the back of the TV set.
4. When powered on, the TV will be turned on
directly or be in standby.
If the power indicator lights up, the TV set is in
remote control or on the TV set to turn on the
TV.
• To put the TV set into standby mode,
on the TV, the TV set remains powered up,
•
socket from the mains outlet.
Note:
-
To access the internet, you must subscribe
high speed broadband internet service
from your internet service provider.
Your TV can be connected to your home
• Wired, using the RJ45 (LAN) connector on
the back panel.
• Wireless, using the internal wireless or
external wireless USB adapter and your
home wireless network.
Note:
Chapter 2:
General Operation

• An ethernet cable long enough to reach
your TV
• A router or modem with an available
Ethernet port
•
• An Ethernet (LAN) port on the back of the
TV
2. Connect your ethernet cable to the
router and to the Ethernet port on the back
of the TV.
TV.
To connect to a wireless network
•
wireless signal.
•
2. Use the
the TV.
Note:
TV.
scanning channels and more. During each
step, either make a choice or skip the step.
If you skip a step, you can perform the
Note:
Note:
You can select all the features from
homepage
1. Press to display homepage.
2. Press to select icons from the
screen list.
4. To exit the menu, press .
0908EN EN
Mo dem Internet
TV Set
Router
Ethernet
Port on th e
back panel
or
Wi rele ss Router
Modem
teSVT
/
Select the input source from
ports,
occur, depending on your network
• If you experience a problem using an
provider.
• According to circumstances of the
or not be supported.
provider.
channel or open virtual keyboard and select
digital switching channel.
Press then press to select
your desired source and then press to
Note:
depending on the model.
press the
on the remote control or the corresponding
decrease the volume.
sound.
Note:
unavailable in certain sources. And for
some
not available.
Chapter 3: Chapter 4:
Using your TV
Source
ATV
CABLE
ANTENNA
HD MI 1
HD MI 2
HD MI 3
AV
Google P lay Movies

and detailed to help you get the most from
1. In TV mode, press on the remote control
to display the quick access list.
2. Press to select the desired item, then
press to open the corresponding
submenu.
3. In submenu, use and
makethe adjustments, or use to select
an item, use to enter and operate
according to the on-screen display or guide.
4. Press to return to the previous menu.
may take a few minutes. During the process,
you can press and chosse YES to exit.
enter the interface. Press to select your
system the, press select frequency and
press
channel.
you want to move,then press the right
arrow key.You can use the arrow keys to
move the channel.If you want to delete the
hightlighted channel,press OK key.
and detailed to help you get the most from
1. In TV mode, press on the remote
control to display the quick access list.
2. Press to select the desired item, then
press to open the corresponding submenu.
3. In submenu, use and
make the adjustments, or use to select
an item, use to enter and operate according
to the on screen display or guide.
4. Press to return to the previous menu.
Enter to ajust picture
set the sound adjustments.
Enter to check MTS audio.
To setup Analogue or Digital
channels.
Hightlight the channels you
want to move,then press the right arrow key.You
can use the arrow keys to move the channel.If
you want to delete the hightlighted channel,-
press OK key.
your preferences.
Note:
1110EN EN
Display & S ound
Info
Picture adjustments
Screen
Speakers
S ound adjustments
HDMI S egs
Channel organi er
S can channels
TV
MTS audio
Channels
S e t up y o u r T V to re c e iv e b ro a d c a s t s ig n a l.
Analogue Setup
Select to customise and receive programmes.
Channels
S e t up y o u r T V to re c e iv e b ro a d c a s t s ig n a l.
Digital Setup
Select to customise and receive digital broadcast services.
Pass through
devices.
Include Standard
format and Enhanced format.
•
for general content. Use to scroll
-
ard, Dynamic, Movie, Sport and Personal.
picture.
enhancement.
to scroll through the sound preset
take a few minutes. During the process, you
can press and chosse YES to exit.
Hearing and Impaired.
and than use to select Primary Preferred
Language.
OK and than use to select Sencond
Preferred Language.
Audio Setup
Mixing Level.
Impaired,Visual Impaired.
than use to select Primary Preferred
Language.
and than use to select Sencond Preferred
Language.
Go to CEC device list to
register new devices.
devices with the TV.
Power on the TV with a
connected HDMI device.
Turn device on and select
[Enable] to enable control of HDMI devices.
Support HDMI Mode
Enhance 4K HDMI signal format.
External Input
Select to congure external inputs.
HDMI CEC Sengs
Select CEC compable devices for stremlinedcontrol.
PictureAjustment
Adjustthepicturesengs suchas Brightness,colorandhue.
Picture&Display
A dju s t the pic tur e a nd s c ree n s en g s .
Display Seng
Adjusttheaspectraoandviewablescreenarea.
Sound Ajustment
Adjust sound and speaker-related opons.
Sound
Adjust sound and speaker-related opons.
TV Placement
Deak Top
Digital Audio Out
PCM
Dolby digital plus
On

plug it again, and ensure that its power
supply is normal.
4. The system supports standard USB1.1
and USB2.0 devices, such as standard
U-disks, MP3 players, mobile hard disks,
etc..
5. For ob
quality, suggests to use the external device
which accords with USB2.0 standard.
6. When playing the video with high
7. For some USB device with power supply,
suggests using it with power to avoid
electric power shortage.
Connect a USB device to a USB socket, the
press OK to enter. If no USB device connected ,
the USB interface will be not displayed.
OK to Play.
3. While playing a Video, press OK Menu of
remote to display the play console. For the
Play console, Press Ok key of remote to Play
to Fast backward.Right key of remote to Fast
forward.
terminals.
1. Download Fast Cast mobile App.
2. Mobile and TV are connect the Same
Wi-Fi.
3. Search device and connect TV.
Note:
120Min and 180Min.
Enter to add World clock.
Turn on to Keep brightness to
prevent disturb others. Clear brightness at a
low level.
Use to scroll through
Language.
Enter to set Home or shop
mode.
You Would be able to view
the standand
Note:
•
Note:
Enter to set Power mode.
Some non-standard mobile
Please change to use the standard device.
Note: Fo
of the system;
2. Hot p
damaging the system or the device.
3. Pay a
device when you are using a mobile hard
disk or a digital camera. If the power supply
can not operate at all. In this case, please
restart the device, or unplug the device and
Adjust sound and
general content. Use to scroll through
Cinema, Music and News.
sound when playing 5.1-channel audio
constant for all programs and inputs.
only. The volume levels between PCM and
Use to scroll through
To reset all Sound adjustment
Select how TV SET placed.
Include Desk Top and Wall Mount.
signals from the Digtal Audio Out.
Audio Only mode.
An app that quickly delivers
mobile content to TV, allowing users to
photos, videos ,music and more to TV
1312EN EN
Chapter 5:
Language
English
Environment
Home
System
Setup your TV opons .
Shop Demo
Power
SleepTimer
PhotoVideo Music Disk
E nj o y M us ic N ig ht m od e
F a s t C a s t W o rld c lo c kS le e p T im e r

but also improve the performance of the TV
Also, there may be no changes to the user
interface at all.
Most problems you encounter with your TV
-
1. Check if the fuse or circuit breaker is
working.
2. Plug another electrical device into the
outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the
outlet.
4. Check the signal source.
No color
1. Change the color system.
3. Try another channel. Black-white
program may be received.
3. Main power is not connected.
1. Adjust the brightness and contrast.
2. Volume is set to mute, press the mute
3. Change the sound system.
It is usually caused by local interference,
such as cars, daylight lamps and hair driers.
interference
If the antenna is located in the fringe area
of a television signal where the signal is
weak, the picture may be marred by dots.
When the signal is extremely weak, it may
be necessary to install a special antenna to
indoor/outdoor antenna.
3. Fine tune the channel.
may happen.
system, neon lamps, electric drills, or other
electrical appliance.
Ghost
Ghosts are caused by the television signal
following two paths. One is the direct path,
hills, or other objects. Changing the
This interference produces moving ripples
or diagonal streaks, and in some case, loss
of contrast in the picture. Find out and
remove the radio interference source.
1. Press the
then press the
TV.
2. Unplug the power cord, then press the
Note:
Note:
• Videos downloaded from internet, or
online videos.
a. It may be caused by the lower
bandwidth of your network. A high
network speed is required to handle
online videos.
the bandwidth.
c. Check if any other computers on the
may be using up bandwidth. Especially if
they are downloading or displaying on-line
videos.
d. The video may not be smooth itself, it is
not the problem of your TV or network.
• All mobile hard disks consume a lot of
power, which may result in power supply
mobile hard disk.
• The audio format of the video in your
mobile hard disk is not supported by the
TV player.
• The formats of the videos may not be
supported by the TV, especially videos
shot by certain kinds of cameras, generally
with their private protocol of formats,
• Mistakes may occur when videos are
copied or compressed so they may
playback.
5. Press Return key of remote to Stop
playing and Press Return to Exit.
to view the picture.
and press OK to show.
3. While showing picture, press OK to
display the play console. For Previous and
to listen to Music.
OK to Play.
3. The Play console includes Previous,
Play/Pause, Fast backward/Fast forward,
Next.
Press key to see PlayList.
4. Press Return key of remote to Stop
playing.
Note:
• Check if your TV is connected with the
network;
• Reboot your TV;
• Consult your internet service provider, to
if access of your router is supported. Refer
• Make sure if your TV is connected with the
router. if the router is well connected and
powered on, try to change a new router and
network line, and use your PC to have a test.
Should your problem persists, try to consult
Client Service Centre.
• Videos from your USB drive - It may result
from data transmission, or its code is far
beyond the supported formats of this TV
set.
1514EN EN