CATER-BREW CK0233 User manual

CATER-BREW CK0233
AUTOMATIC-WATER BOILER
USER MANUAL
Please read this manual carefully prior to use
& keep it in a convenient place for future reference.
CATER KWIK, The Lakeland Catering Centre, Newlands, Ulverston, Cumbria, LA12 7QQ
Tel: [phone] | E-mail: [email protected]

2
Thank you for purchasing the Cater-Brew CK0233 compact water
boiler. In order to ensure safe operation, you are advised to read to
this manual carefully to fully understand the features, installation &
operational details of this equipment.
Contents:
Technical Specification
Installation & Operation
Maintenance
Trouble Shooting
Exploded View
Circuit Diagram
Notes
Contents
3
4
5
6
7
8
9-10

Technical Specification
Power Light
Drain Valve Hole
Faucet
Plastic Feet
Drip Tray
3

Installation
1. Please ensure the boiler is installed on a level surface with proper
ventilation, at least 80mm away from non-combustible surfaces to the sides
of the unit and at least 150mm away at the rear.
2. In hard water areas appropriate water filtration must be installed. If in
doubt, please call our sales team on 01229 480001 for guidance.
3. The foodsafe hose inlet is located on the rear of the water boiler. The
water inlet connector is a standard 3/4” BSP fitting .
Notice: DO NOT use pure water or distilled water. Use only standard tap water.
4. Connect the Boiler to the power supply using the provided 230V/13A plug.
5. If the boiler is to be left for a long period of time unused, please unplug the
unit from the power supply.
Operation
1. Connect the water inlet hose to the water supply and to the rear of the
boiler, ensure that the water supply is turned on.
2. Connect the 13A plug into the power supply, the boiler’s power light
should come on and the unit should fill with water automatically.
3. Use a screwdriver to loosen the water drainage bolt during cleaning.
The steam valve is for adjusting inner steam pressure & draining
overfilled water during malfunction, it is set to “open” by default.
Notice: Do not block the steam valve.
The steam valve is to avoid accident in case of malfunction.
Installation & Operation
4

Maintenance & Safety
1. Check the equipment regularly. Minimum every 3 months.
2. Check the water source, water quality and inlet hose periodically.
In hard water areas appropriate water filtration must be installed
call 01229 480001 for more information.
3. Regularly check the unit for lime scale build up.
4. Unplug the water boiler from the power supply before cleaning.
Keep the water boiler clean, use either a wet towel or cleaning wipe. Never
use a water hose directly to clean equipment. Do not allow water to have
contact with the wiring, plug, inner components, etc. This may lead to
malfunction and endanger user safety.
5. Check that the power connection is secure and fully inserted into the socket.
6. All users must be competent and abide by local electrical safety
regulations. Before this equipment leaves the factory, every part has
been inspected for quality.
7. This equipment is designed for boiling water. The warranty is voided if this
equipment is used for other applications.
8. All safety devices & removable parts should be tested on site by authorized
personnel before use, Maintenance should be carried out after the power
has been disconnected.
9. In the event of a malfunction, disconnect power immediately & call our service
team on 01229 480001.
Warranty
Terms of the warranty are specified at point of sale.
Any applicable warranty is voided if.
1. The boiler is used for any other application.
2. The boiler is not installed or maintained properly.
3. The boiler has continued to be used following malfunction or damage.
4. Parts have been changed without prior approval from manufacturer or authorized
maintenance engineers.
5. Damage or malfunction due to localised incidental or accidental damage, flooding,
lightning strike or power surge.
5
Maintenance

IMPORTANT!
1. ALL maintenance must be carried out by by authorized, trained and
competent engineers.
2. Check the equipment regularly. Minimum every 3 months.
Troubleshooting
6

7
Exploded View

Transformer
℃
Highest water level
Lowest water level
Lamp
Heating element
Electromagnet
Relay connection Relay connection
Temperature probe Water level control public connection
8
Circuit Diagram

9
Notes

10
Notes