Cecilware IWC-25A User manual

OPERATION MANUAL
IWC-25A INDUCTION WOK COOKER
240V, 60Hz, 2.5KW
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: [phone]
Fax: [phone]
Technical Support
[email protected]
Customer Service:
[e-mail]
www.cecilware.com

USE AND CARE INSTRUCTIONS – IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE OPERATING UNIT
1. Use a dedicated 240V electrical circuit.
2. DO NOT block the air-intake panel; blocking may overheat the unit.
3. To ensure cookware compatibility we recommend using any metal wok pan that attracts
magnets such as steel or cast iron.
4. The induction wok cooker itself does not produce heat during cooking; however, the heat from
the wok will leave the ceramic surface hot!
5. Heating an empty wok will automatically activate the Over Heating Protection Device and the
induction wok cooker will stop heating temporarily.
6. Place the induction wok cooker on a horizontal surface and at least 4” away from the wall or
other objects for proper ventilation.
7. DO NOT place any objects or tools in the air-intake panel. Doing so may cause an electrical
shock.
8. To protect against an electrical shock, DO NOT immerse the unit, the cord or the plug in or
near water or other liquids.
9. Close supervision is necessary when the induction wok cooker is used near children.
10. DO NOT operate the induction wok cooker if it has been damaged in any manner or if the unit
malfunctions. Return the unit to the nearest authorized service facility for examination or
repair.
11. The use of any accessories not recommended by the manufacturer may cause injuries.
12. Keep the power cord away from heat.
13. DO NOT place the induction wok cooker in, on or near open flames, electric burners, heated
ovens or other high temperature surroundings.
14. DO NOT heat any sealed cans on the induction wok cooker. A heated can may explode.
15. DO NOT move the induction wok cooker while cooking.
16. After the induction wok cooker has cooled down, unplug the cord and clean as follows:
CERAMIC PLATE: wipe with a damp cloth or use a mild, non-abrasive cleaning solution.
BODY: wipe the control panel with a soft cloth or use a mild cleaner.
17. DO NOT use induction wok cooker for other than intended use.
18. Unplug when not in use.
19. When storing, DO NOT place objects on top of the induction wok cooker.
SAVE THESE INSTRUCTIONS!!!

BUILT-IN SAFETY DEVICES
Overtime Detector
If wok pan is left on the induction wok cooker for more than 2 hours, or if the user does not operate
any functions for more than 2 hours, the induction wok cooker will automatically shutoff.
Automatic Safety Shut-Off
If the induction wok cooker is left on for more than 60 seconds without a wok pan in place, the unit
will automatically shutoff.
Material Compatibility Detector
If the wok-pan material or dimensions aren’t suitable for this induction wok cooker, the Heating
Indicator Light won’t light-up.
Small Object Detector
The induction wok cooker will not recognize any objects or utensils smaller than 2” (5 cm) in
diameter. For best results, please use the recommended 13.78” (35 cm) multi-ply wok-pan which
can be purchased from your induction wok supplier or Cecilware.
Overheating Protection Device
If the woks temperature becomes too high, the Over Heating Protection Device is activated & the
induction wok cooker may stop heating. The unit will work normally again after the temperature is
reduced.
HOW DOES YOUR INDUCTION WOK WORK?
A high frequency (20-35KHz) induction coil is located underneath the surface of the
ceramic top plate. It heats the cooking pan through magnetic friction. The heat is
produced directly within the wok. It's controlled by an electronic circuit to offer superior
performance and function. During cooking, there is no energy lost between the cooker
and the food. Cooking stops when you switch the power off.
PRECAUTIONS BEFORE USING YOUR INDUCTION WOK
1. The glass top is made of strong, hard, and non-porous properties. But, in case of breakage,
even if it's only slightly cracked, disconnect the appliance from the outlet immediately and
contact the after-sales service.
2. The appliance is equipped with a Small Object Detector. It is recommended not to place
metal kitchen utensils, pan lids, knives, or other small metal objects on the induction heating
zone. If the inductor is switched on, there is a risk of the objects becoming hot.
3. When using your induction wok cooker, don't place any magnetic objects on the glass wok top,
such as credit cards, cassettes, etc.
4. Scientific tests have shown that the induction hob presents no danger for a person using a
pacemaker. Please keep a 2’ distance from the unit while the induction wok cooker is in use
anyway.
5. To prevent from overheating, do not place aluminum-foil or an iron plate on the wok top.
6. To prevent an electric shock, do not put any articles like iron wire or tools into the air entrance
or outlet.

7. Immediate clean up is recommended when water is left on the top plate.
OPERATION INSTRUCTION
1. Plug power cord into 240V dedicated circuit.
2. Turn on power by pushing the power on / off key, power level display LED will light on.
3. Put a suitable / recommended wok-pan in the middle of the induction wok cooker.
4. Rotate the rotary knob to select power level: Level 1 (minimum) to Level 9 (maximum).
5. The Heating Indicator Light will indicate if the wok pan is suitable or not. If the light is on,
then the wok is heated. If the light is off, it indicates that the power is on, but no wok or no
suitable wok is on the glass top.
6. This unit is equipped with an Over Heating Protection Device, which will stop power
temporarily. Should this occur, the Heating Indicator Light will flash to indicate the Over Heating
Protection function is on. Then, if it lasts for more than 60 seconds, then the induction wok
cooker will automatically shutoff.
CONTROL PANEL,
1. POWER on/off button
2. HEATING Indicator Light
3. POWER LEVEL indicator (showing from 1 ~ 9 power levels)
4. ROTARY KNOB to select power levels
1
2 3
4

FEATURES & DESCRIPTION:
MODEL# IWC-25A
1. 2500 watt Induction Wok
2. Ceramic Wok Top
3. Stainless Steel Cabinet
4. Rotary Knob
5. Heating Indicator Light
6. Power on/off key
7. Air-Intake
8. Air-Outlet
9. Foot Stand
10. Digital Display (shows power levels 1 to 9)
1
2
3
4
5
6
7
8
9
10

SPECIFICATION:
Model No. IWC-25A Induction Wok
Voltage 240V ~ 60Hz
Vitro-Ceramic Wok Diameter: approx. 12.75”
Electrical Power
Consumption Max. 2,500watt
Safety Device zOver Time Protector (2 Hrs.)
zAutomatic Safety Shut-Off
zMaterial Compatibility Detector
zSmall Object Detector
zOverheating Protection Device
zIC Auto Reset.
Dimension 15.16” x 16.61” x 6.30” (including rubber-foot stand)
38.5cm x 42.2cm x 16cm (including foot stand
height)
TROUBLE SHOOTING
1. If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's
faulty. In all cases, check the below points.
2. If you fail to identify the problem, contact the after-sales service immediately.
Problem Resolution
No indication light when power "on" Cable/terminal block is loose
Tripped circuit or fuse; or automatic switch in your house
Power supply stopped
Heating indicator does not light-up, Unsuitable cooking utensil
Appliance fails to heat up Utensil is located at the center properly
Utensil is smaller than 5cm
Over-heating protection is activated
Appliance suddenly stops heating
during Operation Temperature became too high
Air entrance or outlet blocked
Over-heating protection activated
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: [phone]
Fax: [phone]
Technical Support
[email protected]
Customer Service:
[e-mail]
www.cecilware.com