Cedip DC004U-A Jade UC User manual
DCOO4U-A
JADE UC User Manual
JADE UC
User Manual
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 2
PAGE INTENTIONALLY LEFT BLANK
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 3
1. Contents
1. Contents ................................................................................. 3
2. For your safety........................................................................ 4
3. Precautions............................................................................. 5
4. General Overview ................................................................... 6
4.1.Product Overview................................................................ 6
4.2.Packing Contents ................................................................ 6
4.3.Camera description ............................................................. 8
5. Starting with the camera ...................................................... 11
5.1.Mounting the camera..........................................................11
5.2.Installation of the software on the computer ..........................11
5.3.Connecting the camera .......................................................11
5.4.Powering of the camera ......................................................11
5.5.Pointing and focusing..........................................................12
5.6.Camera Power Off..............................................................12
5.7.Precaution of use ...............................................................12
5.8.Training............................................................................12
6. Using your camera................................................................ 13
6.1.Addition of a lens...............................................................13
7. Maintenance ......................................................................... 14
7.1.Cleaning Optical Surfaces....................................................14
7.2.Storing.............................................................................14
8. Accessories........................................................................... 15
8.1.Additional lenses................................................................15
8.2.Long cables.......................................................................15
8.3.Interconnection / transformation cases .................................15
8.4.Tripods / pan & tilt.............................................................15
9. Diagnostics ........................................................................... 16
9.1.Diagnostic table.................................................................16
9.2.How to contact the after sale service?...................................17
10. Technical data....................................................................... 18
10.1. Characteristics................................................................18
10.2. Electrical interface...........................................................18
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 4
2. For your safety
To ensure no damage to your Cedip equipment, you or other people,
carefully read the following recommendations before using your
equipment. Then keep these instructions in a place easily accessible to all
those which will have to use this camera
The importance of the consequences due to the non-observance of these
instructions is highlighted in the following way:
This icon announces the instructions which MUST be read
before using your Cedip equipment to avoid possible physical
risks.
In the event of dysfunction
of your equipment, stop it
immediately
If you notice smoke or an
unusual odor releasing itself
from your camera or the
adapter sector, disconnect the
adapter sector immediately,
taking care not to burn
yourself. To continue using
the equipment in this case
can be dangerous.
Immediately contact Cedip to
check.
Do not use your equipment
in a flammable gas
environment
Do not use electronic material
in the presence of flammable
gas because that is likely to
cause an explosion or a fire.
Do not dismount your
material
Touching internal parts of the
camera can be extremely
dangerous. If your camera
does not properly work, it
must be urgently repaired by
a qualified technician.
If your camera opens due to a
fall or any other accident,
unplug the power adaptor and
immediately contact Cedip.
Use appropriate cables.
Only use dedicated cable
delivered by Cedip to
maintain conformity with your
camera specifications.
CD-ROM
CD containing software and
manuals must not be placed
in audio CD players. Reading
it can cause audition loss or
damage the equipment.
Camera temperature
Depending on climatic
conditions, the camera
surfaces can be hot. Take
care when holding the
camera.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 5
3. Precautions
To maximize the lifetime and get the best use of your Cedip equipment,
observe the following instructions when storing or using it.
Keep it dry
This device will be damaged if
immerged in water or
exposed to high
temperatures.
Do not exceed the
specified environmental
conditions.
Your equipment may not
function correctly after being
subjected to extreme
environmental conditions
Handle with great care the
lenses and all moving
parts.
Handle the objective gently,
as well as connectors. These
parts are particularly fragile.
Void abrupt changes of
temperature
Abrupt changes of tempera-
ture, for example, if you enter
a heated place in cold
weather conditions, can cause
condensation inside the
device.
Do not drop your camera
The camera may not function
correctly after being subjected
to violent shocks or strong
vibrations.
Do not expose the lens to
the sun
The camera may be seriously
damaged if its lens is in front of
the sun. This precaution must
be respected even if the camera
is off.
Do not expose the lens to
the laser beam
The camera may be damaged if
its lens is exposed at laser
beam. This precaution must be
respected even if the camera is
off and even if there is the
mask.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 6
4. General Overview
4.1. Product Overview
The Jade UC infrared camera is especially designed for the most demanding
users of uncooled infrared technology. This low cost product can be used for a
lot of applications like industrial process control, research and development or
monitoring.
Two Jade UC versions are available: the Jade UC 30X which provides a LVDS
output connector and the Jade UC 33X, which provide a USB 2.0 output
connector. The detector offers the greatest sensitivity, while keeping well
dynamics and well linearity. Video output frequency is 50Hz or 60Hz.
4.2. Packing Contents
The camera is delivered in a robust transport case.
Photo Description Available
1 Jade UC Camera Yes
1 Power Supply Cable Yes
1 USB Cable Yes for
USB
version
1 Digital video cable Option
for LVDS
version
1 COM RS232 cable Yes for
LVDS
version
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 7
1 Waterproof case
Yes
Optical cleaning tissue
Yes
1 CD ROM containing
software and camera files
1 Camera User Manual
1 Camera Characterization
file
Yes
Optical IRIS Option
1 LVDS Frame Grabber
(Optional)
Option
for LVDS
version
ALTAIR Software Option
Additional lens Option
1 Tripod Option
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 8
4.3. Camera description
Jade UC 30X (rear-view):
Power Supply Connector
RS232 COM connector
Analog video Connector
LVDSconnector
Jade UC 33X (rear-view):
USB 2.0 Connector
Analog video Connector
Power Supply Connector
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 9
Jade UC 30X (mechanical interface).
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 10
Jade UC 33X(mechanical interface).
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 11
5. Starting with the camera
This part explains in detail all steps to be followed before using your camera for
the first time.
5.1. Mounting the camera
Ensure you that the camera is posed on a stable surface or correctly screwed
on the tripod.
5.2. Installation of the software on the computer
Software is pre installed on the computer
See software manual for installation instruction
Install frame grabber drivers or USB 2.0 drivers
Install Vircam acquisition drivers
Install Camera Command software CIRRUS
Install Acquisition and Infrared Image Processing software ALTAIR (Option).
5.3. Connecting the camera
Connect numerical USB cable (Jade UC 33X) or LVDS cable and RS232 serial
cable (Jade UC 30X), according to your use, between the camera and the
computer.
Connect possibly the camera to one video monitor in order to control the
image. Use a cable BNC 75 ohms which you will connect to the camera.
5.4. Powering of the camera
The camera is automatically turned on when you connect the power cable.
Connect the power cable on connector with the red reference mark, and then
the system displays the Boot Loader, which gives technical information about
the specific product.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 12
BootLaoder ScreenShot
After a few seconds, 10s typically, the Boot Loader disappears and the system
is ready to take infrared images.
5.5. Pointing and focusing
Before taking a measurement, ensure that the object is located at the center of
the image and that focusing is optimized.
To adjust the focus with motorized lens, use the instruction "S0202.D05 -
instruction for motorized lens" provided in the CD-ROM.
5.6. Camera Power Off
The camera is turned off by disconnect the power cable.
Repeated Power on operations may reduce the lifetime
of your equipment.
Wait at least 1 minute between the power off and the power
on of the camera.
5.7. Precaution of use
Do not exceed specified environmental conditions.
Your equipment risks malfunction after being exposed to
extreme environmental conditions.
Handle with great care the lens and all moving parts
Handle gently any additional lenses, as well as the
connectors. These parts are particularly fragile.
Connection of cables
The connection and disconnection of the cables can be carried
out at any time, camera on or off, computer on or off.
5.8. Training
This equipment and its use require knowledge of the field of infrared
thermography in order to make best use of the camera and the processing of
acquisitions.
Cedip offers training schemes allowing you to use this equipment to its full
potential. You can contact Cedip in order to establish your training
requirements.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 13
6. Using your camera
6.1. Addition of a lens
Lenses are fragile elements.
Take the greatest care at the time of their handling,
particularly for lenses.
Lens connectors are fragile elements (Motorized Lens).
Take great care not to touch the connector while handling the
lens.
Lenses can be heavy.
Some lenses weight several hundred grams. Be careful not to
be surprised by its weight.
Turn the ring of the lens bayonet of a quarter of turn clockwise while placing
a hand below. It is not necessary to strongly tighten ring to turn it.
Be careful with motorized lens because it is impossible to turn the ring of the
lens bayonet of a quarter of turn, just a eighth of turn is required.
Place caps on the lens and store it.
Never force on lens.
Check that optics is clean before assembling it in the camera.
See section 8.1 for the maintenance of optics
Remove the caps of the lenses that you wish to use and place it gently in the
bayonet. Place the locating pin of mounting opposite to the corresponding
hole in lens. A white dot indicates the position (except for motorized lenses).
Gently insert the lens and turn the ring counter clockwise.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 14
7. Maintenance
7.1. Cleaning Optical Surfaces
The cleaning of all optical elements, in particular when
coated, risks deterioration of its surface.
Minimize cleaning by storing the optical elements in their case
or covering the element and its support by a protective cover
when not used.
Dust cleaning procedure:
Blow dust using a clean and dry gas (ultra jet 2000 gas duster).
If dust remains, take a lens tissue (ref. Melles GRIOT: 18LAB020) and wipe
surface gently in only one direction while making movements in the figure
eight. Repeat the operation.
If dust persists, fold a paper for lens using a grip, soak in propanol-2
RECTAPUR 20 (ref. PROLABO: 839.322) and wipe gently surface in only one
direction by making movements in the figure eight. Repeat the operation.
Start again previous step with acetone RECTAPUR (ref. PROLABO:
20065293).
Water, finger marks, oil or water spot cleaning:
Finger marks, oil or water spots must be cleaned immediately.
Blow dust using a clean and dry gas (ultra jet 2000 gas duster).
Using lens tissue saturated with propanol-2 RECTAPUR 20 and folded with
one grip, gently wipe surface with the same movements in the form of eight
(and in one direction). Repeat the operation.
Repeat the previous step with acetone RECTAPUR to eliminate the scratches.
7.2. Storing
Put caps on lenses as soon as you finish using the camera.
Put the camera in its case and store it in a dry cool place, away from dust. Do
not expose the case and its contents to temperatures lower than -20°C (-4°F)
or higher than 70°C (158 °F).
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 15
8. Accessories
At the time of the writing of this handbook, the following optional accessories
were available for this camera. Ask your retailer or Cedip representative to
obtain further details.
8.1. Additional lenses
Cedip offers a range of additional radiometric lenses for the JADE UC camera.
These lenses are accompanied by a data sheet. They are assembled in addition
to the lens integrated into the camera.
8.2. Long cables
Several lengths of cable are available, up to 50m. Cedip also offers optical fiber
repeaters or Ethernet Gigabit repeaters allowing operation at several hundred
meters.
8.3. Interconnection / transformation cases
Several types of interconnection are available, allowing a transmission of the
commands and digital video through optical fiber, Ethernet Gigabit.
8.4. Tripods / pan & tilt
Cedip proposes a selection of tripods and motorized turrets for various uses.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 16
9. Diagnostics
If your camera do not function exactly as it should, check the following table
before consulting Cedip’s after-sales service or your Cedip representative.
9.1. Diagnostic table
Problem Action
Surface treatment of lens is
scaled
Performances of optics will be degraded.
Metrological measurements are not
guaranteed any more (Altaïr - image in
°C)
ÎContact Cedip After Sale Service
Difficulty of installation of a
connector
Pins are twisted?
No ÎEngage the connector gently.
ÎEnvisage the replacement of the
cable. Contact Cedip After-Sales Service
Inconsistency of the image IR
in Altaïr
Have you deactivated all process Plug-in
(Filter, threshold...)?
ÎDeactivate them. Is the image still
inconsistant ?
ÎCheck the cable and the connectors.
No ÎThe problem is solved.
No image (black screen on
monitor) but the digital image
is coherent
To check that the boot loader is displayed
at starting on the analog video. Are
connections correct?
No ÎThe monitor (or its connector) is
at fault
ÎActivate the AGC under CIRRUS.
Check the AGC parameters (Withdraw all
the limitations in gain, offset and ROI).
Does video monitor remain black?
No ÎThe problem is solved.
Yes ÎContact Cedip After-Sales Service
No Live image on Altair
Is the camera correctly connected and
powered?
No Îremake connections
Yes ÎDoes Cirrus communicate with the
camera?
No ÎContact Cedip After Sale Service
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 17
9.2. How to contact the after sale service?
Before contacting the after sales service or your representative, note the serial
number located on the camera. A Cedip engineer will discuss the procedure
with you.
Cedip after sales service is reachable at the address:
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 18
10. Technical data
10.1. Characteristics
Common
characteristics Description
Frame Rate
50Hz or 60Hz interlaced Frame on
analog output
50Hz or 60Hz Full Frame on digital
output
Power Supply 7-14 VDC / 5A
Power consumption 15W max
Digital Video USB / LVDS
Analog Video PAL (50 Hz) or NTSC (60 Hz)
Remote Control USB / Serial
10.2. Electrical interface
10.3.1.Serial RS232 connector
Connector reference: Sub-D femal 9 points
Signal Characteristic: 75 Ohms
Signal Pin
RX 2
TX 3
GND 5
10.3.2.Composite Video Connector
Connector reference: BNC
Signal Characteristic: 75 Ohms
Signal Pin
Video 1
VGND shield
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 19
10.3.3.Power Supply Connector
Connector reference: FISCHER: DBP102Z051-130
Matting part: FISCHER: S102Z051-130 + E3 102.5/4.7
Signal Pin
#
+7 to +14V 1
GND 2
10.3.4.USB2.0 connector
The USB 2 connector is standard connected.
JADE UC User Manual
DC004U-A Jade UC User Manual.doc Page 20
10.3.5.Digital video connector
Connector reference: Micro Sub-D femal 68 pts
Matting part: Micro Sub-D mal 68 pts
Signal Pin# Signal Pin#
GND 1 NC 18
GND 35 NC 52
LVDS_HI_D0 2 NC 19
LVDS_LO_D0 36 NC 53
LVDS_HI_D1 3 NC 20
LVDS_LO_D1 37 NC 54
LVDS_HI_D2 4 NC 21
LVDS_LO_D2 38 NC 55
LVDS_HI_D3 5 NC 22
LVDS_LO_D3 39 NC 56
LVDS_HI_D4 6 NC 23
LVDS_LO_D4 40 NC 57
LVDS_HI_D5 7 NC 24
LVDS_LO_D5 41 NC 58
LVDS_HI_D6 8 NC 25
LVDS_LO_D6 42 NC 59
LVDS_HI_D7 9 NC 26
LVDS_LO_D7 43 NC 60
LVDS_HI_D8 10 NC 27
LVDS_LO_D8 44 NC 61
LVDS_HI_D9 11 NC 28
LVDS_LO_D9 45 NC 62
LVDS_HI_D10 12 NC 29
LVDS_LO_D10 46 NC 63
LVDS_HI_D11 13 NC 30
LVDS_LO_D11 47 NC 64
LVDS_HI_D12 14 NC 31
LVDS_LO_D12 48 NC 65
LVDS_HI_D13 15 LVDS_HI_DATA_CLOCK 32
LVDS_LO_D13 49 LVDS_LO_DATA_CLOCK 66
LVDS_HI_D14 16 LVDS_HI_DATA_FRAME 33
LVDS_LO_D14 50 LVDS_LO_DATA_FRAME 67
LVDS_HI_CLOCKCONT 17 LVDS_HI_DATA_LINE 34
VDS_LO_CLOCKCONT 51 LVDS_LO_DATA_LINE 68
Table of contents
