Central Machinery 59196 Assembly instructions

Visit our website at: http://www.harborfreight.com
Email our technical support at: [e-mail]
Visit our website at: http://www.harborfreight.com
Email our technical support at: [e-mail]
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 22a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools requir e d f o r a ssem b l y a nd ser v i c e may no t b e i n clud e d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 59196
Specifications
Overall Height 32″
Base Dimensions 22″x 19″
Table Dimensions 10-3/4″x 8″
Tool Tray Dimensions 15-3/4″x 12-3/4″
Weight Capacity 150 lb.
Mounting Holes (6) 1/2″Slots
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Unplug grinder (not included) when mounting
or removing from Grinder Stand.
5. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Place the Pads (8) under each one
of the four Lower Legs (4).
2. Where the Upper Leg (3) connects with the
Lower Leg (4), there are four screw holes.
Loosely connect an Upper Leg (3) with a Lower
Leg (4) through the upper screw holes, using
Screws (5), Washers (6), and Nuts (7) (leave
the lower screw holes empty for now).
3. Repeat with the three other Upper
and Lower Legs (3, 4).
4. Set the Table (1) over the top of the four leg
assemblies, lining up the holes on the Table (1)
and the Upper Legs (3). Secure them using
Screws (5), Washers (6), and Nuts (7).
5. Position the Tool Tray (2) into place (see diagram
on page 5). Insert Screws (5) through the lower
screw holes on the Upper and Lower Legs (3, 4),
and through each corner hole of the Tool Tray
(2). Secure with Washers (6) and Nuts(7).
6. Tighten all of the hardware.

Page 3For technical questions, please call 1-888-866-5797.Item 59196
Mounting Grinder
Note: Set up your Grinder Stand on a flat, level, dry
surface. Set up in a room with good ventilation. Only
set up a grinder in an area clear of any flammable
materials or liquids; sparks created by a workpiece
being grinded could result in fire. Make sure your
grinder (not included) is not plugged in during
mounting or removal from the Grinder Stand.
Note: Before mounting your grinder (not included)
to the Grinder Stand, read and understand your
Grinder’s (not included) instruction manual.
1. Mount the Grinder (not included) by lining up the
holes on the grinder base with the holes on the
Table (1) (mounting hardware not included).
Note: The Grinder Stand only fits grinders with
compatible mounting holes (.47″X .78″).
2. To cut down on grinder vibration, you may install
a anti-vibration pad (not included) between the
grinder (not included) and the Grinder Stand.
3. Once the grinder (not included) is mounted
securely, check that the Grinder Stand is
secure by gently tipping it in various directions.
Once your are sure that the Grinder Stand
is stable, you may begin operation.
Maintenance
1. Before and after each use, check the hardware
on the Grinder Stand. Tighten if necessary.
2. Keep the Table (1) clean and clear
of any dirt, grease, or debris.
3. Periodically check the bottom Pads (8) to
make sure they are not cracked or broken. If
necessary, replace cracked or broken Pads
(8) to keep the Grinder Stand stable.
Parts List and Diagram
Part Description Qty
1 Table 1
2 Tool Tray 1
3 Upper Leg 4
4 Lower Leg 4
Part Description Qty
5 Screw 24
6 Washer 24
7 Nut 24
8 Pad 4
1
2
3
4
8
1
2
3
4
5
6
7
8

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 193175459336 when ordering parts.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.