Champ 6255 User manual
Champ Aluminum Panel Bench
Auto Body Toolmart
Champ Frame Straightening Equipment, Inc.
2545 Millenni m Dr., Elgin, IL 60124 (800) 382-1200
www.a tobod y t o o lm a r t . co m
Made In USA
6255 comes partially pre-assembled. Unfold the legs and attach the support bar.
Support Bar
Line up the holes Slide bolt through support bar and leg
Fasten bolt with washer and nut This is how it should look once
the support bar is attached.
Support Bar
Attaching The Table
Place the table on the inside of the leg posts Align the holes and slide bolt
through leg posts and table
Fasten with nut and washer
and repeat with the other side
Lay table top horizontal onto support leg
with lip and slide bolt through to secure
Slide the bars with the washers
into the holes on table top
Repeat this step with the other
three bars with washers
Attaching Arm For Angled Table Top
Align the holes of the support bar and
table top
Slide the attached pin through
the holes to secure
This is how the angled top
will look
Table of contents
Other Champ Rack & Stand manuals
