Champion instruments PRO User manual

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 1/6
Step
Action
Display
1
Power On Champion Pro
2
On your Smart Phone Go To
Settings
3
Open WiFi Connections and Select
GNSS-Your Serial Number

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 2/6
Step
Action
Display
4
To Connect to WiFi Enter Password
1-8
5
Screen should display a message
telling you the Internet may be
available
6
Close Connections and Open Internet
Browser. Enter IP Address 192.168.1.1

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 3/6
Step
Action
Display
7
You should See This Screen asking for
LogIn Account And Password
8
LogIn Account = admin
Password = password
Check Remember Me if you wish to not
enter UN and PW each time
9
You should now be taken to the screen
shown at the right

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 4/6
Step
Action
Display
10
You can now check Status for Position
and Activity if so desired
11
You can also access the SkyPlot of
Satellites being Tracked
12
To Run a Static Session, First Go To
Satellites, Satellite Activation

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 5/6
Step
Action
Display
13
Turn Off BDS and Galileo by moving
the slide to the left. This will disable the
Beidou and Galileo for recording of
Static Observations
14
Next Go To static Recording
15
Move the Slides to the Right to Start
the Receiver in Static Mode.
The default parameters are 30 second
epochs ( Used for OPUS) and Rinex
2.11 File Format.

Champion PRO
Web Interface
Champion Instruments 770.234.3254 | www.championinstruments.com Page 6/6
Step
Action
Display
16
You can name your project and set
your antenna height in the receiver
17
You can also change the Epoch
Interval and Elevation Mask
18
End Static Recording, Move the Slides
to the Left, or Power down the
Receiver. Remember to Disconnect
from your Smart Phone WiFi.
Downloading of Static Data will be
covered in the next Chapter.