CHANCEE CRS1625 User manual

Vacuum Cleaner
CRS1625/CRS1635
Instruction Manual

Preface
This instruction manual contains all the information that you need to use and
maintain the machine. Please read it carefully before getting started. Only with
correct operation and regular maintenance can the machine be kept in its best
working condition.
This instruction manual is an important part of the product and should be kept
together with the machine.
If this manual is lost, please contact us immediately and we will be glad to
provide you with a new one. All technical details included in this manual are
property of Anhui Yangzi Industrial Technology Co., Ltd and are protected by law.
In this manual we use illustrations to show the components and functions of the
machine. It is possible that some of them contain details that are slightly different
from those of yours. However, all the instructions and suggestions presented here
still apply to your product and should be followed strictly during the operation.
Some components of the product may be harmful or dangerous and we have
tried our best to include them in this manual. It is the user’s obligation to pay
special attention to them during the work. However, since it is impossible for us
to point out all potential dangers, we expect you to be extremely cautious during
the work so as to protect the machine, yourself and other people in the working
area.
Only accessories of the original manufacturer can be used on the machine. Using
accessories from other sources may lead to low working efficiency or even
accidents in extreme cases.
We usually modify or improve our products to meet the latest market demand.
However, this is NOT suitable for machines that have been sold. We will NOT be
responsible for any injury or loss caused due to the user’s improper operation
either.
If you have any question, complaint or suggestion, please feel free to contact us
and we will be at your service with all our knowledge and enthusiasm.
We wish you a pleasant experience with our product!

Thanks for choosing our product!
In order to boost your working efficiency and ensure your safety, please read this
instruction manual carefully before using the machine.
Before using the machine:
Do NOT use the machine in places with flammable or explosive gases and
liquids.
Before connecting the machine to the power supply, make sure that the switch
has been turned off so as to prevent electric shocks or fire.
Do NOT touch the plug with wet hands so as to prevent electric shocks.
The voltage of the power supply must NOT be higher than 220 V.
The machine must be assembled by a professional electrician. Before
assembling the machine, make sure that the air switch is turned off, and fix the
power cord onto the terminal of the air switch (4800 W-5400 W, 24 A at least).
Remember that this must be realized by a professional electrician.
Alerts:
Do NOT leave metallic objects such as tacks in the hose or the extension tube
of the machine, or the hose and the filter bag may be damaged. Do NOT use
the machine to clean hair or paper balls to prevent the hose from being
blocked. If there is any blockage, remove it immediately.
In order to prevent fire or electric shocks, do NOT use the machine to suck
objects such as blades, matches or cement block.
An independent socket board must be used for the machine to prevent
overload and fire.
Disconnect the power if you do not need to use the machine for a long time;
do NOT leave the machine when it is connected to the power supply.
Keep the power cord and the machine away from electric heaters and other
heat sources, or they might be deformed and even burned. Do NOT use broken
plugs or sockets.
Do not use the machine with the intake or the exhaust port of the machine
blocked, or the machine may be deformed or damaged.
Do NOT let children play with the machine or its accessories so as to prevent
accidents.
The machine body and the hose may produce static electricity and the user is
recommended to wear protective equipment.
If abnormal noise is produced or the suction force is weak during the work,
stop and check the machine immediately.
Before using the machine to suck water, take out the dust compartment or the
filter; before using it to suck dust, place the dust compartment.

Danger!
Non-professionals are strictly forbidden to open and repair the machine.
Do NOT bend, step on or pull on the hose; do NOT use the hose when it is
broken; do NOT press the hose with blades or heavy objects.
Do NOT have the power cord get caught in the door crack.
Do NOT use the power cord to drag the machine.
When the dustbin is filled, discharge it immediately.
Keep any part of your body away from the machine and its moving
components.
Correct usage, cleaning and maintenance of the machine
In order to extend the service life of the machine, it is recommended not to
use it continuously for more than 30 minutes.
In order to extend the service life of the machine, please discharge the dustbin
immediately when you finish the cleaning.
Wipe the surface of the machine with a wet cloth; do NOT use damp cloths
because it would cause water to infiltrate into the machine and lead to short
circuits.
Installation of the vacuum cleaner
Installation of the hose
Connect the corresponding hose with the suction port of the machine and tighten
it clockwise.
Telescopic tube
Connection of the joint tube with the ground brush

Installation of the universal wheels
Insert the universal wheels directly.
Installation of the rear wheels
1. Put the rear wheels on the base of the machine; align the screw holes of the
rear wheel axle with the spaces in the base.
2. Fix the axle with a screw and tighten it with a screwdriver.
Installation of the upgraded ground brush
Take the front wheel and fixing screws of the ground brush, and tighten the
two front wheel assemblies with a screwdriver;
Take the clamping part and fix it on the base with four screws;
Install the floor brush assembly on the clamping part and tighten it with the

ground brush knob;
Connect one end of the ground brush pipe to the air inlet of the bucket, and
the other one to the floor brush port.
Turning on and turning off the machine
Turn the switch to the position 1 to turn on the machine.
Turn the switch to the position 0 to turn off the machine.

Common problems and solutions
Problem
Cause
Solution
The machine cannot
be started.
The machine is powered-off.
Check whether the plug and the
power cord are complete.
The machine leaks.
The hose is broken.
Replace the hose.
The filter holes become larger
The filter screen is not suitable.
The machine does
not work normally.
The hose is blocked or broken.
Clean or replace the hose.
The dustbin is filled.
Empty the dustbin.
The filter screen is blocked.
Clean the filter screen.
The sealing strips are worn.
Clean or replace the sealing strip.
Too much noise is
produced.
Contact the original manufacturer or the distributor.

Technical parameters
Category
Parameter
CRS1625 CRS1635
Dustbin capacity (L) 25 35
Rated voltage (V) 220 220
Rated power (W) 1600 1600
Vacuum degree (mbar/kPa) 227/22.7 227/22.7
Dustbin material 410 stainless steel 410 stainless steel
Noise (db) 78 78
Frequency (Hz) 50-60 50-60
Filter system HEPA + sponge + dust compartment + dust bag
Steel pipe length (m) 0.5 * 2 0.5 * 2
Hose length (m) 2.5 2.5
Power cord length (m) 5 5
Product size (mm) 355 * 350 * 612 355 * 350 * 735

Warranty Card
用户名
User name
联系电话
Tel
通讯地址
Address
票据号
Bill No.
购买时间
Date of purchase
机身编号
Serial number
产品型号
Type of product
日期
Date
更换配件：
Accessories to be replaced:
故障描述：
Fault description:
ANHUI CHANCEE TECHNOLOGY CO., LTD.
Direction: No. 11 Qiaowan Road, Feixi county, Hefei, Anhui Province, P.R.C
Website: www.chanceeglobal.com