Charlton Home Hertford User manual

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX7

4 / XXXXXXX7

5 / 7
Chair
CM3325SC-2PK
#1 1pc x2
#A 4pcs x2 #B 4pcs x2 #C 2pcs x2 #D 1pc x2
#2 1pc x2
Bolt Ø1/4" X 3"
#E 10pcs x2
Lock WasherØ1/4"
Flat Washer Ø1/4"
Backrest w/Legs
Seat
Allen Wrench
#F 1pc x2
Bolt Ø1/4" X 2-1/2" Bolt Ø1/4" X 1-1/2"
Front Leg
#3 2pcs x2
#1
#3
#2
x 2

ASSEMBLY INSTRUCTIONS
6 / 7
1
2
Part #1 x1pc
Part #2 x1pcs
#2
#1
#2
#1
Hardware #D x4pcs
Hardware #A x4pcs
Hardware #E x4pcs
x 2
x 2
#E
#D
#C
#F
#E
#D
#A
#F
Hardware #C x2pcs
Hardware #D x2pcs
Hardware #E x2pcs
Align seat (#2) to chair back (#1), then secure by using
bolts (#C) with washers (#D,E).
Secure corner holes of the seat (#2) to chair
back (#1), then secure by using bolts (#A) with
washers (#D,E).

ASSEMBLY INSTRUCTIONS
7 / 7
Please ensure the furniture
rests on even and flat
surface. If the product
wobbles or feels loose,
doule- check all bolts and/or
screws are properly tightened
and secured.
ASSEMBLY
COMPLETED
Keep this handy!
Please retain this
instruction manual and any
order-related information
for future reference
Lift, don't drag!
To avoid damage to
product please always
LIFT the product when
transporting or adjusting
the placement
3
4
Hardware #B x4pcs
Hardware #D x4pcs
Hardware #E x4pcs
Part #3 x2pcs
x 2
x 2
#E
#D
#B
#F
#3
#3
Align legs (#3) to seat, then secure by using
bolts (#B) with washers (#D,E).