Chauvet DJ SlimBANK H18 ILS User manual

User Manual

SlimBANK H18 ILS User Manual Rev. 1
Edition Notes
The SlimBANK H18 ILS User Manual includes a description, safety precautions, installation, programming,
operation, and maintenance instructions for the SlimBANK H18 ILS as of the release date of this edition.
Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and SlimBANK H18 ILS are registered trademarks or trademarks
of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.
© Copyright 2024 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage, or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision; however,
Chauvet has no obligation to make, and does not commit to make, any such revisions.
Document Revision
Go to www.chauvetdj.com for the latest version.
Revision Date Description
1 1/2024 Initial Release.

SlimBANK H18 ILS User Manual Rev. 1
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ................................................................................................................ 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
FCC Statement of Compliance ..................................................................... 2
RF Exposure Warning for North America and Australia................................ 3
2. Introduction ................................................................................ 4
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
Fuse Replacement ............................................................................................. 5
Power Linking..................................................................................................... 5
Mounting ....................................................................................................... 6
Orientation.......................................................................................................... 6
Rigging ............................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Operation................................................................................ 7
Menu Map ..................................................................................................... 7
DMX Configuration........................................................................................ 7
Personality and Starting Address....................................................................... 8
D-Fi USB Connectivity .................................................................................. 8
D-Fi USB Compatibility ...................................................................................... 8
D-Fi USB Configuration...................................................................................... 8
D-Fi USB DIP Switch Channels............................................................................... 8
DMX Channel Assignments and Values ....................................................... 9
Standalone Configuration.............................................................................. 11
Static Color......................................................................................................... 11
Automatic Programs........................................................................................... 11
Program Speed ....................................................................................................... 11
Sound-Active Mode............................................................................................ 11
Sound Sensitivity................................................................................................ 11
Custom Color and Strobe................................................................................... 11
Settings Configuration................................................................................... 12
Dimmer Speed ................................................................................................... 12
Factory Reset..................................................................................................... 12
IRC-6 Infrared Remote Control ..................................................................... 12
IRC-6 Operation ................................................................................................. 12
Wired Master/Slave Mode............................................................................. 13
D-Fi USB Master/Slave Mode ....................................................................... 13
ILS Mode....................................................................................................... 13
5. Maintenance................................................................................ 14
Product Maintenance .................................................................................... 14
6. Technical Specifications ........................................................... 15
Contact Us ...................................................................................... 16
Warranty & Returns....................................................................................... 16

1
Before You Begin
SlimBANK H18 ILS User Manual Rev. 1
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
• SlimBANK H18 ILS
• Power cable
• Barn doors
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to the
product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

2
SlimBANK H18 ILS User Manual Rev. 1
Before You Begin
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the
SlimBANK H18 ILS.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
♦Reorient or relocate the receiving antenna.
♦Increase the separation between the equipment and receiver.
♦Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
♦Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
■ALWAYS:
♦Connect to a grounded circuit.
♦Connect to operating voltages as specified on the product's spec sticker.
♦Disconnect from power before cleaning.
♦Disconnect from its power source during periods of inactivity.
♦Heed all restrictions and warnings on the spec sticker.
♦Mount in a location with at least 20 in (50 cm) of ventilation.
♦Replace the fuse with the same type and rating.
■In the event of a serious operating problem, stop using immediately.
■DO NOT:
♦Open this product or attempt any repairs. It contains no user-serviceable parts.
♦Look at the light source when the product is on.
♦Use if the power cord is crimped or damaged.
♦Disconnect by pulling on the power cord.
♦Allow flammable materials close to the product when it is operating.
♦Touch the housing when it is on.
♦Block any ventilation holes/slots in the housing.
♦Connect to a dimmer or rheostat.
♦Carry the product by its power cord.
♦Operate in temperatures higher than 104°F (40°C).
♦Expose to environments that exceed the Ingress Protection (IP) rating.
♦Expose to rain or moisture.
♦Use outdoors.
♦Submerge.
Keep this User Manual for future use. If the product is sold to someone else, be sure that
they also receive this document.

3
Before You Begin
SlimBANK H18 ILS User Manual Rev. 1
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

4
SlimBANK H18 ILS User Manual Rev. 1
Introduction
2. Introduction
Product Overview
Product Dimensions
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
1
#Name
1D-Fi USB port
2Menu buttons
3LED display
4Microphone
5Safety cable pass-
through
6Fuse holder
7Power in
8Power out
9DMX in/out
10 IR sensor
2 3 4 5
6 7 8 9
10
8.2 in
208 mm
14 in
355 mm
2.2 in
55 mm

5
Setup
SlimBANK H18 ILS User Manual Rev. 1
3. Setup
AC Power
The SlimBANK H18 ILS has a fixed voltage power supply, and it can work with an input voltage range of
100 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.
Power Linking
The product provides power linking via the outlet located in the back of the product. See the diagram below
for further explanation.
Power Linking Diagram
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
It is possible to power link up to 8 SlimBANK H18 ILS products on 120 VAC or up to 14
SlimBANK H18 ILS
products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY!
If using the product in other markets, you must consult with the local Chauvet distributor
as power linking connectors and requirements may differ in your country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
1st product 2nd product 3rd product Additional
products
Power
source

6
SlimBANK H18 ILS User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The SlimBANK H18 ILS may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure and attachment points can support the weight before hanging the
product (see the Technical Specifications)
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
Safety cable
(such as CH-05
from Chauvet)
Mounting clamp
(such as CLP-15 from Chauvet)
Mounting bracket
Bracket adjustment knob
(x2)

7
Operation
SlimBANK H18 ILS User Manual Rev. 1
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located around the display. Please refer to the
Product Overview to see the button locations on the control panel.
Menu Map
Refer to the SlimBANK H18 ILS product page on www.chauvetdj.com for the latest menu map.
DMX Configuration
The SlimBANK H18 ILS works with a DMX controller. Information about DMX is in the Chauvet DMX
Primer, which is available from the Chauvet website chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Mode Programming Levels Description
DMX
6Ch d 1–507 6-channel DMX mode
8Ch d 1–505 8-channel DMX mode
12Ch d 1–501 12-channel DMX mode
22Ch d 1–491 22-channel DMX mode
ILS iLS iLS1–4 Sets ILS mode
Static Color C-- C 1–23 Static colors
Program P-- P 1–14 Automatic programs
Speed S-- S. 1–100 Automatic program speed
Sound-
Active Snd Snd Sound-active program (cycles P 1-14)
Sensitivity SEnS u 0–100 Sound sensitivity
Custom
Color and
Strobe u--
r. 0–255
Combine red, green, blue,amber, white, and
UV for a custom static color
G. 0–255
b. 0–255
A. 0–255
W. 0–255
P. 0–255
S.
_ _ _
S. 0 Strobe: off
S. 1–99 Strobe: slow to fast
S.100 Strobe: sound-active
Dimmer
Speed diN
OFF
Sets the dimmer speed
diN1
diN2
diN3
Reset
SEt
rESt Reset to factory default settings
Infrared ir OFF Enables/disables infrared control
ON

8
SlimBANK H18 ILS User Manual Rev. 1
Operation
Personality and Starting Address
The SlimBANK H18 ILS uses up to 22 DMX channels in the 22Ch mode, which defines the highest
configurable address to 491.
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the personality and starting address, do the following:
1. Press <MENU> repeatedly until 6Ch, 8Ch, 12Ch, or 22Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d 1–513.
4. Press <ENTER>.
D-Fi USB Connectivity
The SlimBANK H18 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB
from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch
D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port.
D-Fi USB Compatibility
The D-Fi USB can receive a DMX signal from the D-Fi Hub, the FlareCON Air 2, and other D-Fi USB
products.
D-Fi USB Configuration
1. Set the DMX Personality and DMX address on the SlimBANK H18 ILS.
2. Use the Chart provided to set BOTH:
• the Channel, and then
• The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
D-Fi USB DIP Switch Channels
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display
control / menu buttons will be unavailable until you unplug the D-Fi USB. The priority
levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display/Menu Buttons
Ch. 1234T/R Ch. 1234T/R Ch. 1234T/R Ch. 1234T/R
1919
210 210
311 311
412 412
513 513
614 614
715 715
816 816
Receiving
Receiving
Transmitting
Transmitting

9
Operation
SlimBANK H18 ILS User Manual Rev. 1
DMX Channel Assignments and Values
6Ch 8Ch 12Ch 22Ch Function Value Percent/Setting
–11–Dimmer 000255 0–100%
122–Red 000255 0–100%
–––1Red1 000255 0–100%
233–Green 000255 0–100%
–––2Green1 000255 0–100%
344–Blue 000255 0–100%
–––3Blue1 000255 0–100%
455–Amber 000255 0–100%
–––4Amber1 000255 0–100%
566–White 000255 0–100%
677–UV 000255 0–100%
–––5White1 000255 0–100%
–––6UV1 000255 0–100%
–––7Red2 000255 0–100%
–––8Green2 000255 0–100%
–––9Blue2 000255 0–100%
– – – 10 Amber 2 000 255 0–100%
– – – 11 White 2 000 255 0–100%
– – – 12 UV 2 000 255 0–100%
– – – 13 Red 3 000 255 0–100%
– – – 14 Green 3 000 255 0–100%
– – – 15 Blue 3 000 255 0–100%
– – – 16 Amber 3 000 255 0–100%
– – – 17 White 3 000 255 0–100%
– – – 18 UV 3 000 255 0–100%
–88–Strobe 000 010 No function
011 255 Strobe, slow to fast
––9–
Color Macros and Color
Temperature
000 010 No function
011 200 Color macros
201 205 Color temperature 1
206 210 Color temperature 2
211 215 Color temperature 3
216 220 Color temperature 4
221 225 Color temperature 5
226 230 Color temperature 6
231 235 Color temperature 7
236 240 Color temperature 8
241 245 Color temperature 9
246 250 Color temperature 10
251 255 Color temperature 11

10
SlimBANK H18 ILS User Manual Rev. 1
Operation
– – 10 19 Automatic program
000 010 No function
011 028 Automatic program 1
029 045 Automatic program 2
046 062 Automatic program 3
063 079 Automatic program 4
080 096 Automatic program 5
097 113 Automatic program 6
114 130 Automatic program 7
131 147 Automatic program 8
148 164 Automatic program 9
165 181 Automatic program 10
182 198 Automatic program 11
199 215 Automatic program 12
216 232 Automatic program 13
233 250 Automatic program 14
251 255 Sound-active program (cycles P 1-14)
––1120
Program speed (when
Ch. 7 is 011250)000 255 Automatic program speed, slow to fast
Sound sensitivity (when
Ch. 7 is 251 255)
000 010 Sound sensitivity off
011 255 Sound sensitivity, low to high
– – – 21 Dimmer 000 255 0–100%
–––22Strobe 000 010 No function
011 255 Strobe, slow to fast
– – 12 – Dimmer speed
000 051 Dimmer speed set from display menu
052 101 Dimmer speed mode off
102 152 Dimmer speed mode 1 (fast)
153 203 Dimmer speed mode 2 (medium)
204 255 Dimmer speed mode 3 (slow)
6Ch 8Ch 12Ch 22Ch Function Value Percent/Setting

11
Operation
SlimBANK H18 ILS User Manual Rev. 1
Standalone Configuration
Set the product in one of the standalone modes to control without a DMX controller.
Static Color
To fun the SlimBANK H18 ILS with a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C 1–19.
4. Press <ENTER>.
Automatic Programs
To run the SlimBANK H18 ILS with an automatic program, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a program, from P 1–14.
4. Press <ENTER>.
Program Speed
To set the program speed of the SlimBANK H18 ILS, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the speed, from S. 1–100.
4. Press <ENTER>. The display will return to the selected program.
Sound-Active Mode
To run the SlimBANK H18 ILS in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
Sound Sensitivity
To set the sound sensitivity on the SlimBANK H18 ILS, do the following:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from u 1–100.
3. Press <ENTER>. The product will return to sound-active mode.
Custom Color and Strobe
To run the SlimBANK H18 ILS with a custom color and strobe speed, do the following:
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
•r. _ _ _ (red),
•G. _ _ _ (green),
•b. _ _ _ (blue),
•A. _ _ _ (amber),
•W. _ _ _ (white),
•P. _ _ _ (ultraviolet), or
•S. _ _ _ (strobe)
3. Use <UP> or <DOWN> to increase or decrease the value, from 1–255 (for a color) or from 0–100
(for the strobe speed: 0is off, 1–99 is slow to fast, 100 is sound-active).
4. Press <ENTER>. to cycle through the options.
5. Repeat steps 3-4 until the product is set as desired.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).

12
SlimBANK H18 ILS User Manual Rev. 1
Operation
Settings Configuration
Dimmer Speed
To set the dimmer speed of the SlimBANK H18 ILS, do the following:
1. Press <MENU> repeatedly until diN shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the speed, from oFF (instant/linear dimmer), diN1 (fast), diN2
(medium), or diN3 (slow).
4. Press <ENTER>.
Factory Reset
To reset the SlimBANK H18 ILS to factory default settings, do the following:
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select rESt.
4. Press <ENTER>.
IRC-6 Infrared Remote Control
The SlimBANK H18 ILS is compatible with the IRC-6 infrared remote control from Chauvet. To run the
SlimBANK H18 ILS in IR mode, follow the instructions below.
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select ir.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select from oFF or on.
6. Press <ENTER>.
IRC-6 Operation
Automatic Programs
To run an automatic program with the IRC-6:
1. Press <AUTO> on the IRC-6 (or press <FADE> to select P 14).
2. Press <+> or <–> to select the program.
To set the program speed with the IRC-6:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed.
Sound-Active Mode
To run the sound-active mode with the IRC-6, press <SOUND>.
To set the sound sensitivity with the IRC-6:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sensitivity.
Manual Mode
To mix a custom color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press <R> (red), <G> (green), <B> (blue), <A> (amber), <W> (white), or
<UV> (ultraviolet) to select which color to edit.
3. Press <+> or <–> to increase or decrease the value of the selected color.
To select a preset color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press <P/UV>, <W>, or <0>–<9> to select the color.
Strobe
To adjust the strobe rate with the IRC-6:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe, or set the strobe to 0.
Black Out
To black out the lights with the IRC-6, press <BLACK OUT>.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing <BLACK OUT>.
Black Out may have been activated.
BLACK
OUT AUTO SOUND
SENSI-
TIVITY
SPEEDSTROBE
%MANUAL FADE
RGB
WUVA
+ 0
-
123
654
789

13
Operation
SlimBANK H18 ILS User Manual Rev. 1
Wired Master/Slave Mode
The Master/Slave mode allows a single SlimBANK H18 ILS product (the “master”) to control the actions of
one or
more SlimBANK H18 ILS products (the “slaves”) without the need of a DMX controller. The master
product will be
set to operate in either standalone mode or with the IRC-6, while the slave products will be
set to operate in slave mode. Once set and connected, the slave products will operate in unison with the
master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 6Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select d 1.
4. Press <ENTER>.
5. Connect the DMX input of the first slave product to the DMX output of the master product.
6. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave
product.
7. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode or with the IRC-6.
2. Make the master product the first product in the DMX daisy chain.
D-Fi USB Master/Slave Mode
The D-Fi USB allows a single SlimBANK H18 ILS product (the “master”) to control the actions of one or
more SlimBANK H18 ILS products (the “slaves”) without the need of a DMX controller or DMX cables. The
master (transmitter) product will be set to operate in standalone mode or with the IRC-6, while the slave
(receiver) products will be set to operate in DMX mode. Once set and connected, the slave products will
operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 6Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to set the starting address to d 1.
4. Press <ENTER>.
5. Set the D-Fi USB to receive on a specific channel, 1–22.
6. Plug in the D-Fi USB.
7. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in standalone mode.
2. Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
3. Plug in the D-Fi USB.
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the GigBAR MOVE+ILS: Modes
1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4 synchronize with side
2 of the GigBAR MOVE+ILS. When linked, effects will sync with the most similar effect on the selected side
of the GigBAR MOVE+ILS: Kinta effects will sync with one of the kintas, wash effects will sync with one of
the pars, etc. This product will synchronize with the par on the selected side of the GigBAR MOVE+ILS.
To set the SlimBANK H18 ILS to respond to an ILS signal:
1. Press <MENU> repeatedly until iLS shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2).
4. Press <ENTER>.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation
because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.
• All products must be set to the same DMX personality, DMX address, and D-Fi channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation
because the controller may interfere with the signals from the master.

14
SlimBANK H18 ILS User Manual Rev. 1
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
all lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

15
Technical Specifications
SlimBANK H18 ILS User Manual Rev. 1
6. Technical Specifications
Dimensions and Weight
Note: Dimensions in inches are rounded.
Powerr
Light Source
Photometrics
Thermal
DMX
Ordering
Length Width Height Weight
8.2 in (208 mm) 14 in (355 mm) 2.2 in (55 mm) 6 lb (2.7 kg)
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 68 W 67 W
Operating Current 1 A 0.5 A
Power linking current (products) 8 A (8 products) 8 A (14 products)
Fuse T 2 A, 250 V T 2A, 250 V
Power I/O U.S./Worldwide UK/Europe
Power input connector IEC IEC
Power output connector Edison IEC
Power Cord plug Edison (U.S.) Local Plug
Type Color Quantity Power Current Lifespan
LED
hex-color RGBAW+UV 18 6.2 W 1.6 A 50,000 hours
Strobe Rate Beam Angle Field Angle Illuminance
0 to 20 Hz 27° 43° 3,111 lux @ 2 m
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
I/O Connector Channel Range
3-pin XLR 6, 8, 12 or 22
Product Name Item Code UPC Number
SlimBANK H18 ILS 10032293 781462226411

16
SlimBANK H18 ILS User Manual Rev. 1
Contact Us
Contact Us
Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration.
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd., Suite 509 Voice: [phone]
Davie, FL 33314 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone]
Toll Free: [phone] Website: www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park Email: [email protected]
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB Website: www.chauvetdj.eu
UK
Voice: [phone]
Fax: [phone]
Chauvet Benelux
Address: Stokstraat 18 Email: BN[email protected]
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: [phone]
Chauvet France
Address: 3, Rue Ampère Email: [email protected]
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: [phone]
Chauvet Germany
Address: Bruno-Bürgel-Str. 11 Email: [email protected]
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: [phone]
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B Email: [email protected]
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: [phone]