Chauvet DJ CH-02 User manual

CH-02
Quick Reference Guide

CH-02 QRG EN
2
About this
Guide
The CH-02 Quick Reference Guide (QRG) has product information
on
how to use your new stand. See www.chauvetlighting.com/product-
manuals-literature/ for the latest information on the CH-02.
Disclaimer
The information and specifications contained in this QRG
are subject to
change without notice.
Safety Notes
Read all the safety notes listed below before installing, operating, or
maintaining
•This product is not intended for permanent installation.
•This product should be assembled only by trained professionals.
•Be sure to assemble this product using all the parts included.
•Do not use this stand for a load that exceeds the maximum weight
capacity in this document, or on the label on the product.
•Do not use the product if any of the following conditions exist:
owelded joints are cracked or compromised
ohorizontal rungs, T-bar, or diagonals are dented or damaged
otripod, junctions, connectors, or quick release pins are bent
othe product has been dropped
•Do not drag the product over the floor or other objects.
•Place sand bags over the lower cross bars for increased stability of
the product.
The maximum, evenly distributed, load capacity for the CH-
02 is
110 lb (50 kg).

CH-02 QRG EN
3
Contact
Outside the U.S., United Kingdom, Ireland or Mexico,
contact your
distributor to request support or return a product. Visit
www.chauvetlighting.com for contact information.
What is
Included
•CH-02
•Connecting Hardware •Warranty card
•Quick Reference Guide
Not Included
The following common items are not included, but are suggested for
the
assembly of the CH-02.
•Phillips Screwdriver
•Wrench
Be sure to follow all instructions and cautionary statements that
may
accompany any additional items you obtain.
To Begin
Carefully unpack the product immediately. C
heck that all the parts are in
the package, and that they are in good condition.
If the box or any of the contents appear damaged from shipping, or show
signs of mishandling, save all packaging and file a cl
aim with the carrier
immediately;
do not notify CHAUVET®. Failure to report damage to the
carrier immediately or failure to have all packaging available for inspection
may invalidate your claim.
For other issues, such as missing components or parts, damage not related
to shipping, or concealed damage, file a claim with CHAUVET® within 7
days of delivery. For information on contacting CHAUVET®, see
Contact Us in this QRG.

CH-02 QRG EN
4
Parts List Including Connecting Hardware
Quantities
Parts (size)
Description
Diagram
8
hex
head bolts (M10)
Used at attachment
points for fixtures
on the
T-bar and side bars
8 wing nuts (M10)
Used in
combination with M10 hex bolts
8 hex nuts (M10)
Used in
combination with M10 hex bolts
15 washers
Used in
combination with M10 hex bolts
5 small hex bolts (M6)
Used in combination with small hex nuts
to
tighten braces
18 small Phillips-head
bolts (M6)
Used in combination with small hex nuts
to
tighten braces
23 small hex nuts (M6)
Used in combination with small hex and
Phillips
-head bolts
6 braces
Brace
s for T-bar and side bars
(takes 2 small bolts and nuts)
1 brace
Brace for the bottom of the
T-bar
assembly
(takes 3 small bolts and nuts)
3 T-braces
Brace
s for T-bar and side bars
2 side bars
Used in the side bar assembly
1 T-bar
Used in the
T-bar assembly
4 small support bars
Used in the
T-bar and side bar
assemblies
1 tripod assembly
Tripod
portion of the CH-02
(pre
-assembled)
1 hex wrench
Tool fo
r adjusting the small hex bolts
The tripod section comes assembled; however, the T-bar and side ba
rs
require assembly. For details, see Assembly Instructions and
Assembly
Guide sections.

CH-02 QRG EN
5
Description
The CH-02 is a heavy-duty aluminum T-bar stand
with side bar supports,
8 optional mounting points, and quick release
pins for easy setup and
teardown. The CH-02 is great for mobile DJs and entertainers.
Assembly
Instructions
To assemble the CH-02, refer to the diagrams on the following pages and
do the following:
Figure 1:
1. Loosen lower knob on the tripod assembly.
2. Open the tripod legs and place the product on the floor
(or level surface) so the center shaft is vertical.
3. Tighten the lower knob on the tripod to secure it.
4. Loosen the upper knobs on the center shaft.
5. Extend the inner tube of the center shaft.
6. Tighten the upper knobs on the center shaft to secure the tube in place.
Figure 2:
7. Assemble the supported side bars. See T-bar and Side Bars
Assemblies and T-bar and Side Bars Finished View for more
information and close-up views.
8. Slide the supported side bars assembly over the shaft and secure it at
the desired height by tightening the bolts.
Note: Be sure to tighten all the bolts of the side bars assembly.
Figure 3:
9. Assemble the T-bar with supports. See T-bar and Side Bars
Assemblies and T-bar and Side Bars Finished View for more
information and close-up views.
10.Slide the T-bar with supports over the top of the shaft and secure it
into place by tightening bolts.
Note: Be sure to tighten all bolts of the T-bar assembly.