
This manual forms an integral part of the product and should be kept safe for future reference
and passed on to any new owners.
SAFETY BEFORE USE
Check the product for any sign of damage. Do not use if any is found and contact your supplier.
PRODUCT
This machine uses a wheel on a motorised axis. The wheel rotates through the liquid reservoir to
create bubbles.
WARNINGS
• Do not overll the liquid reservoir.
• Clean any overow/spillages immediately with a slightly wet cloth.
• Always use professional quality bubble uid, such as Soundlab or Venu bubble uids.
• This machine is for indoor use only.
• Fluid may cause spots/bleaching on clothing/upholstery etc.
• If uid is spilt on the oor it is important to clean it up immediately as this will cause the oor to
become slippy.
• Prolonged use in a single area can cause oors to become slippy.
• Be sure to warn people that the oor may become slippy and that risk of slipping is possible.
• Do not leave this unit switched on when unattended.
INSTRUCTIONS FOR USE
1) Place 2 x C Cell batteries in the battery compartment of the unit making sure they are inserted
correctly
2) Before use place the machine on a level surface and ll the reservoir with uid, making sure to
leave a 10mm gap from the surface of the uid to the top of reservoir.
3) Point the machine in the desired direction and switch the unit on (the power switch is located
on the back of the machine).
4) After use empty any remaining uid out of the reservoir back into the original bottle.
SPECIFICATIONS
Dimensions........................ 220 x 180 x 140mm
Weight ...................................................... 1.2kg
Output ............... Up to 150 bubbles per minute
Power ...........2 x C size batteries (not included)
Electrovision Ltd.,
Lancots Lane, Sutton,
St. Helens, Merseyside.
WA9 3EX
website: www.electrovision.co.uk