Chevrolet COLORADO 2023 Assembly instructions

1
chevrolet.com
Certain restrictions, precautions, and safety procedures apply to your vehicle.
Please read your Owner’s Manual for complete instructions.
Review this quick reference guide for an overview of some important features in your Chevrolet Colorado.
Some equipment described in this guide may not be included in your vehicle. Contact your dealer for details
on a specific vehicle. All information contained in this guide is based on the latest information available at the time
of printing and is subject to change without notice. More information can be found in your Owner’s Manual
and at chevrolet.com/owners. For easy reference, keep this guide in your glove box.
chevrolet.com
2023
COLORADO
GETTING TO KNOW YOUR

2
Memory
Seat
Buttons
F
Cruise Control/
Forward Collision
Alert Buttons
F
Digital Driver
Information
Center
Driver Information Center/
Audio/Voice Recognition/
Heated Steering
Wheel
F
Buttons
Engine Start-
Stop Button
(on instrument
panel)
Integrated
Trailer Brake
Control
F
Turn Signal/
Windshield
Wipers Lever
Instrument
Panel Lighting
Control
Power Mirror
F
/
Window Switches
INSTRUMENT PANEL
Audio Volume
Controls
(on back of
steering wheel)
Audio Next/Previous
Favorite Station
Controls (on back of
steering wheel)
Steering
Wheel
Adjustment
Lever
Low Fuel
Parking Brake Set
Cruise Control Set
Security
Door Ajar
Traction Control Off
StabiliTrak Active
Four-Wheel Drive Modes
Airbag Readiness
High-Beam Headlamps
Check Engine
$
Auto Stop
Stability Control Off
Lights On Reminder
Antilock Brake System
Charging System
Low Tire Pressure
Fog Lamps
SYMBOLS
Due to current supply-chain shortages, certain features shown have limited or late availability, or are no longer
available. See the window label or your dealer regarding the features on an individual vehicle.

3
See Introduction in your
Owner’s Manual.
Color LED Display
with Google
built-in
Climate Controls/
Heated & Ventilated Seat
Buttons
F
Color LED Display
Power/Volume
Control
Tow-Haul Mode
F
/Auto Stop Disable/
Hazard Warning Flashers/Lane Keep
Assist/Auxiliary
F
/Express-Down
Power Window
F
Buttons
USB
Ports Wireless
Phone
Charging
Pad
F
Electric
Parking
Brake Switch
4WD Transfer
Case Knob
F
/
Drive Mode
Selector
F
Read your Owner’s Manual to
learn about the information
being relayed by the lights,
gauges and indicators on the
instrument cluster.
Lane Keep Assist
Pedestrian Ahead
Engine Oil Pressure
Engine Coolant
Temperature
Vehicle Ahead
Automatic Emergency
Braking Disabled
Service Electric Parking
Brake
Driver Seat Belt Reminder
2
Front-Passenger Seat
FOptional equipment. Some equipment shown may not be included in your vehicle.
Z71 model shown

4
Lock
Press to lock all doors and tailgate.
Unlock
Press to unlock
the driver’s door.
Press again to
unlock all doors
and tailgate.
Vehicle
Locator/Panic
Alarm
Press and release
to locate your
vehicle.
Press and hold to activate the alarm. Press
again to cancel the alarm.
[
[
Remote Vehicle StartF
Press twice to start the engine from
outside the vehicle. After entering the
vehicle, press the ENGINE START/STOP
button.
The engine will run for 15 minutes.
Press the
[
[
button twice again to
extend the remote start.
To cancel a remote start, press the
[
[
button until the parking lamps turn off.
Note: To change the remote settings, go to
Settings > Vehicle > Remote Lock, Unlock and
Start on the infotainment screen.
See Keys, Doors and Windows in your Owner’s Manual.
REMOTE KEYLESS ENTRY TRANSMITTER (KEY FOB)
F Optional equipment Some equipment shown may not be included in your vehicle.
The Keyless Access System enables operation
of the front doors without removing the Remote
Keyless Entry transmitter (key fob) from your
pocket or bag. The key fob must be within 3 feet
of the door being unlocked/locked.
KEYLESS UNLOCKING
With the key fob within range:
Press the button on the driver’s door to
unlock the driver’s door or all doors and tailgate.
Press the button on the passenger door handle to unlock all doors and tailgate.
KEYLESS LOCKING
With the ignition off, the key fob removed from the vehicle, and all doors closed:
Press the button on a front door handle to lock all doors and tailgate immediately.
All doors will lock automatically after a short delay if Passive Locking is turned on in
the Settings menu.
Note: To change the lock settings, go to Settings > Vehicle > Remote Lock, Unlock and Start on the
infotainment screen.
See Keys, Doors and Windows in your Owner’s Manual.
KEYLESS ACCESS SYSTEM

5
Some equipment shown may not be included in your vehicle.
The Remote Keyless Entry transmitter (key fob)
must be in the vehicle to turn on the ignition.
STARTING THE ENGINE/ON
With the transmission in Park or Neutral, press
the brake pedal and then press the ENGINE
START/STOP button to start the engine. The
green button indicator will illuminate.
Note: If the key fob battery is weak, place the key fob in
the right cupholder in the center console to enable the
engine to start. Replace the key fob battery as soon as possible.
STOPPING THE ENGINE/OFF
Shift to Park and then press the ENGINE START/STOP button to turn off the engine.
ACCESSORY MODE
With the engine off and the brake pedal not applied, press the ENGINE START/STOP
button to place the ignition in Accessory Mode. The amber button indicator will
illuminate.
See Driving and Operating in your Owner’s Manu
KEYLESS (PUSH-BUTTON) START
The fuel-saving Engine Stop/Start system automatically turns off the engine, referred
to as an Auto Stop, when the brake pedal is applied and the vehicle is at a complete stop,
if certain operating conditions are met. When stopped, the
$
displays in the Driver
Information Center. The engine may remain running or restart when the vehicle is
stopped, depending on current operating conditions. When the brake pedal is released or
the accelerator pedal is pressed, the engine will restart.
AUTO STOP DISABLE
Press the
$
Auto Stop button on the center of the instrument panel. The button
indicator will turn off.
The Engine Stop/Start system is enabled each time the vehicle is started.
See Driving and Operating in your Owner’s Manual
To apply the parking brake, pull the Parking Brake switch on the center console.
To release the parking brake, turn on the ignition, press the brake pedal, and then
press the switch.
See Driving and Operating in your Owner’s Manual.
AUTO ENGINE STOP/START OPERATION
ELECTRIC PARKING BRAKE

6
DIC CONTROLS
Press the Display button to view and
scroll through the cluster pages.
Press the or switch to scroll
through the menus.
Press the switch to select an item.
CLUSTER DISPLAY AND GAUGES
With the Gauges page displayed, press
and hold the Display button to
change the gauges. Press the or
switch to scroll through the options;
press the switch to select the desired
option. Some gauges will be displayed
based on the current Driver Mode.
VEHICLE INFORMATION
Press the Vehicle Information icon on
the infotainment screen to view all avail-
able vehicle information.
When viewing an item, select Add to Driver Display to display an item or Remove from
Display to remove an item on the driver display.
To reset the current trip odometer, select Reset under the Trip Information option.
DIGITAL DRIVER INFORMATION CENTER
DRIVER’S MEMORY SETTINGSF
The Driver Information Center (DIC) displays a variety of vehicle messages and system
information. Controls are on the right side of the steering wheel.
SET MEMORY POSITIONS
1. With the vehicle in Park, adjust the driver’s seat and power outside mirrorsFto the
desired positions.
2. Press and release the SET button and then press and hold button 1or 2on the driver’s
door until two beeps sound.
To store a seat position for more clearance when exiting the vehicle, repeat these steps
using the Exit button instead of button 1or 2.
RECALL POSITIONS
Press and hold button 1, 2 or Exit until the set position is reached.
To enable the memory positions to be recalled automatically when the ignition is
turned on/off (for exit recall, the driver’s door must be opened), go to Settings >
Vehicle > Seating Position > Seat Entry Memory and Seat Exit Memory on the
infotainment screen.
See Seats and Restraints in your Owner’s Manual.
See Instruments and Controls in your Owner’s Manual.
F Optional equipment Some equipment shown may not be included in your vehicle.

7
F Optional equipment Some equipment shown may not be included in your vehicle.
CLIMATE CONTROLS
See Climate Controls in your Owner’s Manual.
Defog, Vent, Floor
Air Delivery Modes
Fan Controls
ON/OFF
/A/C
Recirculation/
Air Conditioning
Passenger’s
Heated
F
/
Ventilated
F
Seat Controls
Driver’s
Temperature
Control
SYNC
Synchronized
Temperature
Passenger’s
Temperature
Control
F
/
Defrost/Rear
Window Defog
F
Driver’s Heated
F
/
Ventilated
F
Seat Controls
AUTO
Automatic
Operation
F
Dual Automatic Climate Controls
F
shown
EXTERIOR LIGHTING
Select the
Automatic Light Control
icon (A) at the top of the infotainment
screen to turn the auto headlamps on/off.
To operate the exterior lamp controls, go
to Controls > Lights > Headlights on the
infotainment screen. Select the Auto set-
ting to have the exterior lamps turn on or
off automatically, depending on outside
lighting conditions.
To enable the IntelliBeam system, which automatically turns the high-beam
headlamps on/off based on traffic conditions at night, go to Controls > Lights > Auto
High Beams. The exterior lamps must be in the Auto setting. A white on the
instrument cluster indicates the system is on. A blue appears when the high-
beam headlamps are on.
Note: IntelliBeam activates the high-beam headlamps only when driving more than 25 mph.
See Lighting in your Owner’s Manual.
A

8
Applications
F
:
Touch a screen
icon to access
an app
Applications Tray
Shortcuts to
commonly used
apps
Power/Volume/
Mute
Additional Pages:
Swipe to display overview
page or additional page
of apps (if available)
Read your Owner’s Manual for important information about using the infotainment system while driving.
FOptional equipment Some equipment shown may not be included in your vehicle.
INFOTAINMENT SYSTEM
The infotainment system uses a Bluetooth or USB connection to link to a compatible
device, such as a smartphone or portable audio player/iPod®, and offers hands-free
voice control. For assistance, call 1-855-4-SUPPORT (1-855-478-7767) or visit
chevrolet.com/support.
MANAGING HOME PAGE ICONS
1. Press the Home icon.
2. To enter edit mode, touch and hold the Home page icon to move.
3. Continue holding the icon and drag it to the desired position, and then release.
STORING FAVORITES
Radio stations from all bands (AM, FM or SiriusXMF) can be stored in any order.
1. Tune in a radio station. The sources menu is at the top of the Audio page.
2. Select the desired page of favorite buttons.
3. Touch and hold one of the favorite buttons to save the station.
SIRIUSXM WITH 360L™F
The personalized content of SiriusXM with 360L offers more than 200 channels, includ-
ing ad-free music, sports, comedy, talk and news, along with access to On Demand
shows, performances and interviews. Certain features require a SiriusXM subscription
and a Connected Access plan. See siriusxm.com and onstar.com for details.
Note: Your Colorado has over-the-air software update capability. If you’re using a 3rd-party device
connected to the Data Link Connector, it may inhibit the vehicle from receiving updates when software
is available.

9
GOOGLE BUILT-IN†F
Google built-in provides access to your favorite apps, including Google Assistant, Google
Maps and Google Play.
Google Assistant – Talk to Google to get hands-free help. Easily get directions, play
media, control vehicle functions and more.
To start, say “Hey Google,” tap the Google Assistant icon in the App Tray on the Home
page, or press the Push to Talk button on the steering wheel.
Google Maps – Reach your destination faster with real-time traffic information, auto-
matic rerouting and voice control. Sign in for personalized maps with home and recent
locations.
Google Play – Download some of your favorite apps in your vehicle just as you would on
your phone to listen to music, podcasts, audiobooks and more.
Sign in to your Google Account to get your apps, messages, custom directions and
more in your vehicle.
Note: Google built-in services are subject to limitations and availability may vary by vehicle,
infotainment system and location. Select service plan required. Certain Google actions and functionality
may require account linking. User terms and privacy statements apply.
APPLE CARPLAY® AND ANDROID AUTO™†F
Apple CarPlay or Android Auto capability is available through a compatible phone using
the Apple CarPlay or Android Auto icon on the Home page.
1. There are two ways to set up device projection:
• Wireless Connection – Connect your phone by pairing it to the in-vehicle Bluetooth
system. Turn on wireless Apple CarPlay or Android Auto in your phone’s settings.
• Wired Connection – Connect your phone to a USB data port using the USB cable
provided with your phone. Aftermarket USB cables may not work.
2. Follow the instructions on the infotainment system and the phone.
3. The Apple CarPlay or Android Auto icon will illuminate when connected. Touch the icon
to have your apps displayed.
To exit Apple CarPlay or Android Auto, press the Home icon.
†Android, Android Auto, Google, Google Play and Google Maps are trademarks of Google LLC; Apple CarPlay is a trade-
mark of Apple Inc.
See Infotainment System in your Owner’s Manual.
F Optional equipment
INFOTAINMENT SYSTEM
With the vehicle’s available built-in 4G LTE Wi-Fi hotspot, up to 7 devices (smartphones,
tablets and laptops) can be connected to high-speed internet. Visit onstar.com for infor-
mation about the standard 3-year Onstar & Connected Services Plan.
To retrieve the name and password for the hotspot, select the Wi-Fi Hotspot icon or
go to Settings > Connections > Wi-Fi Hotspot on the infotainment system.
See Infotainment System in your Owner’s Manual.
4G LTE WI-FI® HOTSPOTF

10
TRACTION CONTROL & STABILITRAK SYSTEMS
WIRELESS PHONE CHARGINGF
Read your Owner’s Manual for important information about using the Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in-
vehicle Bluetooth system. The vehicle must be stopped to pair a device. Not all devices
will support all functions. Visit chevrolet.com/support for more information.
PAIR A PHONE
1. To use voice recognition, press the Push to Talk button; after the prompt, say “Pair
my phone.” To use the infotainment screen, select the Phone icon > Manage Phones >
Add Phone.
2. Start the pairing process on your phone. From the phone’s Bluetooth settings, select
the name shown on the infotainment screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone screen is displayed.
FIRST TO CONNECT PAIRED PHONES
Multiple phones can be paired to the Bluetooth system. The system connects to the
phone that is set as First to Connect.
To set the First to Connect phone, select Settings > Connections > Phone > Options for
the connected phone > First to Connect.
See Infotainment System in your Owner’s Manual
BLUETOOTH® SYSTEM
F Optional equipment
The wireless charging system for smartphones is located at the front of the center con-
sole. To check device compatibility, visit chevrolet.com/support. See your phone retailer
for details on required phone accessories.
1. The vehicle must be on, or Retained Accessory Power must be active.
2. Remove all objects from the charging pad.
3. Place the phone, screen up, on the pad.
4. The charging symbol will appear on the infotainment screen when charging.
See Instruments and Controls in your Owner’s Manual.
The traction control system limits wheelspin and the StabiliTrak® electronic stability
control system assists with directional control of the vehicle in difficult driving condi-
tions. Both systems turn on automatically every time the vehicle is started. Turn off
Traction Control if the vehicle is stuck and rocking the vehicle is required.
To turn traction control or electronic stability control (ESC) on or off, go to Controls >
Drive & Park > Traction Control on the infotainment screen.
See Driving and Operating in your Owner’s Manual.

11
F Optional equipment Some equipment shown may not be included in your vehicle.
SETTING CRUISE CONTROL
Press the On/Off button. The Cruise Control symbol will illuminate in white on
the instrument cluster.
When traveling at the desired speed, press down the switch to the SET position to set
the speed. The symbol will illuminate in green on the instrument cluster.
ADJUSTING CRUISE CONTROL
+ RES Resume/Accelerate
Press up to resume a set speed. When active,
press once to increase speed 1 mph; press
and hold to continue increasing speed.
– SET Set/Coast
When active, press down once to decrease
speed 1 mph; press and hold to continue
decreasing speed.
Cancel
Press the button, or press the brake pedal, to cancel Cruise Control without erasing
the set speed from memory.
The set speed is erased when Cruise Control or the vehicle ignition is turned off.
ADAPTIVE CRUISE CONTROLF
The system maintains the set speed and a following gap — the time between your vehicle
and a vehicle detected directly ahead — by accelerating or braking automatically while
you continue to steer.
Press the Following Gap switch to select a targeted following gap setting of Far,
Medium or Near. This is also the Forward Collision Alert setting.
Press and hold the Cancel button to switch between regular Cruise Control
and Adaptive Cruise Control.
See Driving and Operating in your Owner’s Manual.
CRUISE CONTROL
VEHICLE CUSTOMIZATION
Some features can be turned on/off or custom-
ized using the Controls and Settings menus
on the infotainment screen, including Buckle
to Drive, Exterior Lamps, IntelliBeam Auto
Headlamps, Traction Control and others.
1. Select Controls or Settings on the Home page.
2. Select the desired menu item.
3. Select the desired feature and setting.
4. Press <Back to exit each menu.
See Instruments and Controls in your Owner’s Manual.

12 F
Optional equipment Some equipment shown may not be included in your vehicle.
DRIVE MODES
F
The Drive Modes modify the overall driving
experience. Each mode automatically adjusts
various vehicle settings based on driving
preferences, weather and road conditions.
Available modes are displayed on the info-
tainment screen.
Rotate the control knob on the center console to select a mode. Modes may include:
Normal – Use for everyday driving.
Off-Road – Use for enhanced control during off-road driving at moderate speeds.
Terrain – Use for enhanced control in low-speed off-road conditions in 4HI
or 4LO. This mode enables one-pedal driving, which automatically applies the brakes
when accelerator pedal position is decreased.
Tow/HaulF– Use when towing or hauling heavy loads in
stop-and-go traffic or through rolling terrain.
Baja (ZR2 only) – Use for enhanced control during off-
road driving at higher speeds.
FOUR-WHEEL DRIVE
F
Press an icon on the control knob on the center console to
shift the transfer case.
The four-wheel-drive status is displayed on the Driver Information Center. Refer to the
Owner’s Manual for the shift procedures.
AUTO Automatic Four-Wheel-Drive High – Use when traction conditions vary.
Two-Wheel Drive High – Use for most streets and highways.
Four-Wheel Drive High – Use when extra traction is needed, or in most
off-road driving. Not intended for dry pavement.
Four-Wheel Drive LowF– Use when driving off-road in deep sand, mud or
snow, or on steep hills. Not intended for dry pavement.
N Neutral
F
– Use when towing the vehicle.
OFF-ROAD PERFORMANCE DISPLAY
F
Select the Off-Road icon on the infotain-
ment screen to display real-time off-road
performance data.
Baja – Displays G-force with maximum val-
ues, steering angle, and transfer case status.
Terrain –Displays pitch and roll with maximum values, and tire pressure.
Overlanding – Displays an altimeter and compass.
To reset the maximum values achieved, select the value and then select the
Reset icon.
See Driving and Operating in your Owner’s Manual.
DRIVE MODE CONTROLF/FOUR-WHEEL DRIVEF

13
Some equipment shown may not be included in your vehicle.
Safety or driver assistance features are not a substitute for the driver’s responsibility to operate
the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road
conditions at all times. Read your Owner’s Manual for important feature limitations and information.
To turn some of the following systems on/off or to change some settings, go to
Settings > Vehicle > Collision/Detection Systems on the infotainment screen.
FORWARD COLLISION ALERT – The Vehicle Ahead Indicator is green on the instru-
ment cluster when a vehicle that you’re following is detected, and it is amber when
you’re following a vehicle ahead much too closely. When approaching a detected vehicle
directly ahead too rapidly, a red alert flashes on the windshield and rapid beeps sound.
Press the Forward Collision Alert switch on the steering wheel to set the alert
timing to Far, Medium or Near.
FOLLOWING DISTANCE INDICATORF– The following distance to the vehicle ahead is indi-
cated in seconds under the Info menu on the Driver Information Center. If no vehicle is
detected ahead, dashes are displayed.
Note: Functionality requires a late available over-the-
air software update. See your dealer for details.
AUTOMATIC EMERGENCY BRAKING – The
system works with Forward Collision Alert
to help you avoid or reduce the severity of
front-end collisions with a detected vehicle
you’re following. Camera technology is used to
automatically provide hard emergency braking
or enhance the driver’s hard braking.
FRONT PEDESTRIAN BRAKING WITH BICYCLIST DETECTION – During daytime driving, the
system can detect pedestrians and bicycles directly ahead and displays an amber
indicator on the instrument cluster. When approaching a detected pedestrian or bicycle
too quickly, a red alert flashes on the windshield and rapid beeps sound. The system may
automatically provide hard emergency braking or enhance the driver’s hard braking.
Nighttime and low-visibility performance are limited.
LANE KEEP ASSIST WITH LANE DEPARTURE WARNING – The system may help you avoid
collisions due to unintentional lane departures. The Lane Keep Assist indicator is
green if the system is available to assist. If the vehicle approaches a detected lane mark-
ing, the system may assist by gently turning the steering wheel to help prevent lane
departure and displays an amber . If active driver steering is not detected, the amber
may flash. The system does not continuously steer the vehicle; the driver needs to
steer and be in complete control of the vehicle. Alerts do not occur when using the turn
signal in the lane departure direction or intentional lane departure is detected.
To turn on or off, press the Lane Keep Assist button on the instrument panel.
See Driving and Operating in your Owner’s Manual.
DRIVER ASSISTANCE SYSTEMS

14
DRIVER ASSISTANCE SYSTEMS
BLIND ZONE STEERING ASSISTF– The system works with Lane Keep Assist to help you
avoid a potential collision with a detected vehicle in an adjacent lane. While driving, the
system displays a warning symbol on the left- or right-side mirror when a moving
vehicle is detected rapidly approaching or is in that side blind zone. The warning symbol
flashes if a turn signal is activated when a vehicle has been detected on the same side.
If a vehicle is detected in the adjacent lane that you are entering, the system provides an
urgent steering wheel turn to alert you to take action and beeps sound. The green
Lane Keep Assist indicator will turn amber and the warning symbol will flash on the
left- or right-side mirror. The steering correction will occur even when using the turn
signal in the lane departure direction.
To turn on or off, press the Lane Keep Assist button on the instrument panel.
REAR PARK ASSISTF– During low-speed parking maneuvers, the system provides “dis-
tance to closest object” information on the instrument cluster and a beep sounds. When
an object is very close, 5 beeps sound.
REAR CROSS-TRAFFIC BRAKINGF– When in Reverse, the system warns of detected cross
traffic approaching in either direction and provides alerts and hard emergency braking
to help reduce the severity of or help avoid collisions at very low speeds.
REAR PEDESTRIAN ALERTF– During daytime driving with the vehicle in Reverse, the
system can detect pedestrians directly behind the vehicle and will display an amber indi-
cator on the infotainment screen. When a pedestrian is detected close to the vehicle, the
indicator flashes red and rapid beeps sound. Nighttime and low-visibility performance
are limited.
See Driving and Operating in your Owner’s Manual.
REAR VISION CAMERA/SURROUND VISIONF
F Optional equipment Some equipment shown may not be included in your vehicle.
REAR VISION CAMERA – When the vehicle is in Reverse, a view of the area directly behind
the vehicle displays on the infotainment screen.
Touch the Hitch Guidance button on the screen to turn the guideline on or off.
SURROUND VISIONF– The system uses
multiple cameras to display a high-resolu-
tion image of the area around the vehicle
along with front- and rear-camera views on
the infotainment screen. Camera view but-
tons are on the bottom of the screen.
Touch the Guidance Lines/Hitch
Guidance button to change guidelines.
Touch the Top-Down View, Side View or
Underbody ViewF button to display a
front or rear, sides or underbody view of the vehicle.
See Driving and Operating in your Owner’s Manual.

15
F Optional equipment Some equipment shown may not be included in your vehicle .
IN-VEHICLE TRAILERING APP
F
The in-vehicle trailering app on the infotain-
ment screen allows customized trailer profiles
with a variety of helpful towing assistance
features, including a hitching and setup
checklist, trailer light testing, trailer theft
detection and more.
INTEGRATED TRAILER BRAKE CONTROL
(ITBC)
F
The ITBC system can be used to adjust the power output, or Trailer Gain, to the trailer
brakes. The control panel is on the left side of the instrument panel. ITBC information is
displayed on the ITBC page on the Driver Information Center.
Squeeze the control together to manually apply the trailer brakes.
Adjust the Trailer Gain by pressing the +/– adjustment buttons.
See Driving and Operating in your Owner’s Manual.
ADVANCED TRAILERING SYSTEMF
HILL DESCENT CONTROLF
INTEGRATED STORAGE SYSTEMF
The system maintains vehicle speed from 1–19 mph while descending a steep incline in a
forward or reverse gear.
To turn the system on or off, go to Controls > Drive & Park > Hill Descent Control on
the infotainment screen. The symbol will illuminate on the instrument cluster when
enabled. Vehicle speed must be below 37 mph to enable the system. The current
speed, if below 19 mph, will be the set speed.
Adjust speed by applying the accelerator or brake pedal, or use the Cruise Control +/–
buttons on the steering wheel. The adjusted speed becomes the new set speed. The
symbol flashes when the system is actively applying the brakes.
See Driving and Operating in your Owner’s Manual
The StowFlex tailgateFfeatures a locking
storage compartment.
With the tailgate open, press down on
the storage lid and rotate the handles (A)
to the Unlock position. Use the lift tabs
on each end (B) to raise the lid.
To close, make sure the handles (A) are
in the Unlock position. Close the lid and
then press down on the storage lid and
rotate the handles to the Lock position.
See Storage in your Owner’s Manual.
B
A
B

16
1-800-CHEV-USA (1-800-243-8872) TTY Users: 1-888-889-2438
As the owner of a new Chevrolet, you are automatically enrolled in the Chevrolet
Roadside Assistance program for up to 5 years/60,000 miles, whichever occurs first, at
no expense to you. The Chevrolet Roadside Assistance toll-free number is staffed by a
team of trained advisors who are available 24 hours a day, 365 days a year to contact a
service provider for light services (fuel delivery, jump starts, flat tire, and lock outs) or
make arrangements to tow your vehicle to the nearest Chevrolet dealer for any repairs.
ONSTAR ROADSIDE ASSISTANCE
If you have a current OnStar Safety & Security plan, press the blue OnStar button or red
Emergency button to get the help you need. An OnStar advisor will use GPS technology
to pinpoint your vehicle location and contact the nearest service provider.
To learn more about OnStar services, press the blue OnStar button, visit onstar.com, call
1-888-4-ONSTAR (1-888-466-7827), or refer to your Owner’s Manual.
Get to know more about your vehicle and review your plans, services
and rewards with your Chevrolet account. Check out an online Owner’s
Manual and how-to videos, track your service history and warranty
status, manage your OnStar and Connected Services vehicle plans,
review your current Vehicle Diagnostics report (active service account
required) and more. Scan the QR code or go to chevrolet.com/owners
to create an account today.
Download the myChevrolet app to your compatible smartphone (or device) and, if your
vehicle is properly equipped, you can use your device to start or turn off your engine,
lock or unlock your doors, view key diagnostic information, see your parking location
and more.
The app is available on select Apple and Android devices. Service availability, features and functionality
vary by vehicle, device and data plan. Device data connection required. Visit onstar.com for more
details. Download the mobile app from the App Store or Google Play Store.
ROADSIDE ASSISTANCE
MY CHEVROLET ACCOUNT
MYCHEVROLET MOBILE APP
85119853 A
We recommend always using
ACDelco or GM Genuine Parts.
Some equipment described in this guide may not be included in your vehicle. Contact your dealer for details on a spe-
cific vehicle. All information contained in this guide is based on the latest information available at the time of printing
and is subject to change without notice. Certain restrictions, precautions, and safety procedures apply to your vehicle.
Please read your Owner’s Manual for complete instructions. Copyright 2022 General Motors LLC. All Rights Reserved.