Chicago Pneumatic CP 8730 Guide

BULLETIN NO.
SERVICE PARTS LIST 54-26-2000
July 2003
REVISED BULLETIN DATE
WIRING INSTRUCTION
FIG. PART NO. DESCRIPTION OF PART NO.REQ.
1 05-78-0350 3mm x 15mm Self-Tapping Screw (5)
2 05-78-0900 4mm x 20mm Pan Hd. PT T-20 Scr. (4)
3 05-81-0409 4mm x 8mm Pan Hd. Machine Screw (2)
4 06-65-0970 4mm x 10mm Pin (2)
5 14-30-0575 Gearcase Assembly (1)
6 14-50-0720 Motor Assembly (Includes item 3) (1)
7 22-56-0195 Connector Block (1)
8 23-66-2247 Switch Assembly (1)
9 31-44-1405 Right Housing (1)
10 31-44-1410 Left Housing (1)
11 32-62-0230 Planet Gear (2)
12 32-65-0100 Ring Gear Assembly (1)
13 34-40-0960 Rubber Ring (1)
14 38-50-0930 Middle Shaft Assembly (1)
15 42-06-0475 Output Shaft Assembly (1)
16 45-24-0520 Forward/Reverse Lever (1)
17 45-06-0750 Felt Washer (2)
18 45-06-0760 0.8mm x 20mm Seal (2)
19 45-88-0805 Washer (1)
20 45-88-0955 Washer (1)
21 12-20-1090 Service Nameplate Kit (1)
22 34-60-1030 Retaining Ring (1)
58-01-1835
A33A
STARTING
SERIAL NO.
CP8730
CATALOG NO.
14.4 VOLT 3/8" SQUARE IMPACT WRENCH
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
MILWAUKEEELECTRICTOOLCORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg.2
0
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
00
WARNING
SWITCH POLARITY SENSITIVE
If wired incorrectly with connector
block #7, switch will be damaged
and destroyed! Refer to Service
Wiring Diagram 58-01-1835.
!
FIG. LUBRICATION:
6 Lightly coat the pinion area of the motor
assembly with Type "L" grease, No. 49-08-4170.
12 Lightly coat the inside surface of the ring gear
assembly with Type "L" grease.
4,11, Lightly coat the surfaces of the pins, planet
14,15,20 gears, middle shaft assembly, output shaft
assembly and washer with Type "L" grease.
ChicagoChicago
ChicagoChicago
Chicago
PneumaticPneumatic
PneumaticPneumatic
PneumaticTMTM
TMTM
TM