CHIEF KCG220 User manual

CLICK
www.chiefmfg.com
CALL
800.582.6480
FAX
877.894.6918
SPECIFICATIONS
FEATURES
TECHNICAL DRAWINGS
WHAT YOU NEED TO KNOW
RECOMMENDED ACCESSORIES
98
Dual mONiTOr DESK mOuNTS
KcG220™HEIGHT ADJUSTABLE SWING ARM
For a complete list of monitor mount accessories see page 108.
KSa1007 nCentris Quick
Release Interface
KcD220
Dual Monitor Swing Arm Desk Mount
KcD320
Triple Monitor Swing Arm Desk Mount
KSa1008 n Extended Desk Clamp Bracket
– Compatible with 2.5”- 5”thick surfaces
KSa1012 nExtended Reach Desk
Clamp Bracket
Depth from Wall 6.4” (163 mm)
Max. Extension 24” (610 mm)
Height Adjustment 13.25” (337 mm)
Tilt ±15°
Weight Capacity 9.5 lbs (4.3 kg)
Max. Screen Width 22.7” (577 mm)
Grommet size .38 - 3” (10 - 76 mm)
Colors Black, Silver
iNSTalliNG THE mONiTOr mOuNT
The mounting surface thickness must not exceed 3.2” (81 mm).
OTHEr PrODucT OPTiONS
CEntris™ tEChnology
PATENTED FEATURE
Provides smooth fingertip tilt in all directions
using the screen’s center of gravity. Screen
angle stays set until you decide to re-adjust.
EAsy 3-stEp instAllAtion
Ships fully assembled, clamp option can be
installed from top of desk, grommet bolt
through hardware included.
indEpEndEnt AdjustMEnt
Adjust each screen independently for
ergonomic alignment.
FingErtip hEight AdjustMEnt
Adjust viewing height up to 13.25” (337 mm).
Optimize height adjustment for any display
with customizable tension.
1
2
3
4
4
3
2
1
27.4”
(695 mm)
VESA
75 mm & 100 mm
5.1”
(129 mm) Lift Arm 13”
(330 mm) vertical range
Pivot up to
±180˚
±90˚
13.4”
(341 mm) 8.7”
(221 mm)
Max Thickness
3.2” (81 mm)