CHIEF PSM-2096 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE 700
SAVAGE, MINNESOTA 55378 USA
8805-000028 Rev01
2003 Chief
Manufacturing
www.chiefmfg.com
08/04
PLASMA DISPLAY STATIC MOUNT
PSM-2096, PSM-2097 AND PSM-2391
(1) Plasma Static Mount (1) Nylon Washer
(1) Latching Flag (1) 10-24 Nylock Nut
(1) 10-24 x .5 Flat Head Undercut Screw
BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
Plasma Displays are Extremely Fragile.
1. Attach latching flag to mount using the 10-24 undercut screw, Nylon washer, and Nylock nut
(see Figure 2). Tighten until friction will hold the flag in place.
CAUTION!
Figure 2
Figure 1

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC. 8805-000028
1-800-582-6480 952-894-6280 FAX [phone] Chief Manufacturing
12800 HIGHWAY 13 SOUTH, SUITE 500 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 01/04
2. Securely anchor the plasma static mount to wall studs or supporting framework (see
WARNING).
3. Make sure the flag is lowered before attempting to place the plasma on the mount.
4. With the aid of another person, lift the plasma display up to the mount, align the mounting
buttons on the plasma with the teardrop slots in the mount, and set the plasma into place (see
Figure 3).
5. Position (raise) the flag to secure the plasma. For added security, attach pad-lock through
corresponding holes of bracket and latch.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES
THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE
EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT
THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT
IS 175 POUNDS (79.38 KG).
Figure 3
WARNING