Christie 38-817001-01 Series User manual

38-817001-01 Projector Mount
Installation Instructions Page 1
38-817001-01 INSTALLATION INSTRUCTIONS
Mounting
Bracket
M8 x 10mm
Phillips Head
Screw (7ea)
M8 Flat
Washer (7ea)
1. Invert the projector and place it on a soft and flat surface.
2. Locate the mounting points found on the bottom of the chassis.
3. Align the bracket to the projector mounting points.
NOTE: Raise or remove any feet levelers or any obstacle that may prevent the bracket from properly
aligning to the mounting points.
4. To install the mounting bracket to the projector, align the bracket with the mounting. Secure the seven
(7) M8 x 10 (mm) Phillip screws. Do not over tighten the screw (Figure 1).
NOTE: Please refer to the PROJECTOR MOUNT BASE BOX ASSEMBLY Installation
Instructions Manual for information on how the 38-817001-01 will attach to the Base
Box.

38-817001-01 Projector Mount
Page 2 Installation Instructions
Bracket Installation
Front of Projector
38-817001-01
Mounting Points
(M8 x 10mm
Phillips head
Screws and M8
Flat Washers)
38-817001-01
Mounting Points
(M8 x 10mm
Phillips head
Screws and M8
Flat Washers)
Base
Box
Front of Projector
Base Box
Projector Legs