
Step 4
4.1
6
4.2
9
5
Usage For Tipover Restraint Device:
To secure Cabinet against wall, attach two Brackets ( ) on wall and 2 are
already attached to the products, use Restraint Strap( )to connect the
Brackets ( )
⑩
⑦
⑦
4.1) Drill two holes on wall at same height as Bracket ( ) on Cabinet ( A)
with Power Drill ( ).
You can mark these points in the ways as below:
1) Move the Cabinet back to the wall. Mark two point same height as
Cabinet on the wall.
Note : The brackets need to be secured to solid ,load bearing surface
. Please use a stud finder (not supplied) if needed to locate the wall
frame.
2)Measure the height of the Brackets ( ) with ruler/measuring tape and
mark on wall to keep them accurate and same height.
4.2) Insert Wall Plugs ( ) into drilled holes on wall with Hammer ( ).
⑦
⑥
⑦
⑨⑤
Page 6 of 8
Noble House Home Furnishings LLC
WARNING
Tipover Restraint Device Installation Instruction
Serious or fatal crushing injuries can occur from tripping furniture.
To help prevent tip-over : ALWAYS secure this furniture to the wall using tipover restraint
See products instruction for more ways to help prevent furniture tip-over
device.