Christopher Ward Atoll Special Edition C60 User guide

C60 Atoll Special Edition
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side

22

3
C60 Atoll Special Edition
Individuality is something we all value. But in watchmaking, that’s
not easy to achieve.
However, there are some timepieces whose uniqueness is there for
all to see: timepieces like your C60 Atoll Special Edition, for example.
As you can see, the watch’s dial is a light azure blue in the centre
before gradually getting darker toward the edge. Achieving this isn’t
easy: the process begins by spraying a darker shade onto the dial
while it spins on a specially constructed turntable. Then a lighter
colour is added on top of this.
From then on, layers of colours are added, with the intensity of
shade decided by the speed of the spin. Not only does this look
fantastic, but it ensures no dial is ever quite the same.
Of course, it’s not all about the looks (though they’re hard to
ignore). Your C60 Atoll Special Edition is also water-resistant to
600m and powered by Sellita’s SW200-1 automatic movement –
known for its reliability, accuracy, and robustness.
Which makes your C60 Atoll Special Edition the perfect – and unique
– combination of art and science.

4
Features
• Swiss made
• 26 jewel self-winding mechanical
movement
• 38-hour power reserve
• Christopher Ward rotor with sandblasted
nish
• Anti-shock system
• Brushed and polished marine-grade 316L
stainless steel case
• Screw-down exhibition caseback
• Unidirectional stainless steel bezel
• Unique engraved serial number
• Anti-reective sapphire crystal
• Azure blue gradient dial with twin-ag
motif
• Date calendar
• Central hacking seconds
• Top-brushed indexes with diamond
polished facets
• Signature Trident counter-balance on
seconds hand
• Super-LumiNova®Grade X1 GL C1-lled
hands and indexes
• Eco-friendly luxury presentation case and
owner’s handbook

5
Technical Information
Calibre Sellita SW200-1
Case 316L stainless steel
Diameter 40mm
Height 12.95mm
Weight 83g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -20/+20 seconds per day
Lug to lug 47.46mm
Strap width 20mm

6
How to operate your C60 Atoll Special Edition
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Atoll Special Edition has a maximum power
reserve of 38 hours when fully wound. Normal wearing will allow
the rotor to start re-powering the watch over time after putting
on your wrist.
• Pull gently into position 3. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date

7
1 2 3 4
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3 to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-down position
2. Manual winding
3.Date setting
4.Time setting

8
How to operate your C60 Atoll Special Edition
If using the bezel for a dive and let’s say the recognised maximum
“no-stop time” is 55 minutes, then in this example (shown right)
the time at the surface immediately before the dive is 10.08am.
However the bezel marker is at the 12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with the
8 minute position.
• You can now read that the 55 minute no decompression limit
will occur at 3 minutes past the next hour.
Diving with your watch
PLEASE NOTE:
It is always useful and best practice to make a note on a dive slate
before entering the water and to carry a set of dive tables should the
dive plan change during the course of a dive. A safety stop for 3 to 5
minutes at 15ft is recommended at the end of all dives. A safety stop
for 3 minutes at 15ft is required any time you come within 3 pressure
groups of a no decompression limit, and for any dive to a depth of
100ft or deeper.

9
Bezel marker No decompression limit
Start of dive