Christopher Ward Lido User manual

Lido
OWNER’S HANDBOOK

Time on your side...
Your Christopher Ward watch has been designed and engineered by highly talented craftspeople to
ensure not only accurate and precise timekeeping but also to bring a real pride of ownership that
only luxury items of the highest quality can ever hope to deliver.
You have made an investment, a good one, and the aim of this handbook is to help you make the
most of that investment during what I hope will be a lifetime of ownership.
Christopher Ward

Caring for your Christopher Ward quartz watch
Your W2 Lido is constructed from the finest components and materials available including one of
Switzerland’s finest quartz movements.
As with all watches of this quality, with just a little care, it has the potential to become an heirloom
piece giving further joy to future generations.
Here are a few hints to help keep your watch working perfectly over the years:
• Althoughthebatteryinyourwatchmaylastlonger,werecommendyouhaveitchangedevery
2/3 years by a reputable watch repairer.
• Atthesametimeashavingthebatterychangeditmakessensetohavethewatchrepairerclean
and lubricate your watch as necessary.
• Makesurethecrownisscreweddownfullybeforeputtingthewatchintowater.Adhereto
the water resistance ratings towards the end of the handbook to prevent water getting to the
movement which could result in a very costly repair or the need for a replacement movement.
• Yourwatchisshockresistanttominorimpactsbutdroppingfromheightontoahardsurface
may damage the movement.

Should you need a replacement part - don’t worry, we keep stocks of spare parts for years, even for
discontinued models. It’s all part of the Christopher Ward service.
Finally, don’t forget our famous 60:60 Guarantee allows you to return your watch absolutely free,
for any reason, and with no quibbles, for up to 60 days after purchase and we also guarantee your
movement for up to 60 months.
After all, why shouldn’t you enjoy peace of mind as much as you enjoy your watch?

The W2 Lido
Features
7 jewel Swiss quartz movement
Convex sapphire crystal with anti-reflective
coating
Water resistant to 5 atm
Adjustable quick-release butterfly clasp
Screwdown case with unique serial number
Adjustable quick-release butterfly clasp
Date window
Retro-styled guilloché dial
Screw-in crown
Technical Data
Diameter: 26mm
Height: 7.5mm
Weight: 50g - 110g
Case: 316L Stainless steel
Calibre: ETA 956.112
Accuracy: +20 / -10 seconds per month

Description of the display and control buttons
Display elements
MinuteHand
Hour hand
Second hand
Date Window
Control buttons
Crown

Setting the time
To get to position , turn the crown anti-clock-
wise until it releases itself.
From position , pull the crown to position
and adjust the calendar in a clockwise direction.
Pull the crown to position adjust the time
setting on either a clockwise or anti-clockwise
direction.
After adjusting to the correct time ensure that
the crown is screwed back in until flush with the
case in order that water resistance is maintained.
1 2
1 2
1
3
3

Fitting the bracelet
If you find the bracelet needs adjusting to your wrist we recommend you have it re-sized by a
reputablewatchrepairerorjeweller.Mostlocaljewellerswilleitherdothisforfreeorperhapsmake
a nominal charge for what is a job that should only take a few minutes. It is always best to be
present so a comfortable fit is achieved.
Establishing the length of the bracelet
Place the watch with its separated bracelet on your wrist and estimate the number of links you need
to remove. If you need to remove several links, try to keep the numbers removed from both halves
of the bracelet as equal as possible to ensure that the clasp remains roughly in the middle of your wrist.
To open your bracelet simply press either side of
the clasp to release as shown.
Press

The quick-release butterfly clasp
The strap versions of the W2 Lido use quick-release butterfly clasps. If you are unfamiliar with the
butterfly clasp system just follow our 8 step guide below.
Step 1 Locate the clasp Step 2 Click quick-release Step 3 Pull open clasp Step 4 Prise cover open
Step 5 Thread strap through Step 6 Snap back Step 7 Close clasp Step 8 Complete

Water resistance
Please note. these are only guidelines
but we strongly urge you to adhere
to them to retain the integrity of
your watch. If you have any queries
regarding this please contact us
direct.
NB. To safeguard watch movement
please ensure the crown is, at all times,
screwed in correctly.
1 ATM(10Metres)
Safe to wear your watch
while washing your
hands with tap water.
3 ATM(30Metres)
Washing your car and or
general hosepipe usage.
5 ATM(50Metres)
Water resistant to
most household
shower units.
10 ATM(100Metres)
Safe to use while
snorkelling in open
water, it is not advisable
to dive with your watch.
30 ATM(200Metres)
Ideal for experienced
divers and, in general,
anybody practising
scuba-diving.
50 ATM(500Metres)
Professional divers,
experienced prolonged
exposure underwater.

Keeping in touch with Christopher Ward...
From small beginnings just a few short years ago (our first workshop was actually a refurbished
chickenshed!),ChristopherWardhaswonaworldwidefollowingforhiseponymouswatchbrand
and can justifiably claim to manufacture the most affordable luxury watches in the world.
For many, the philosophy behind the brand, trying to put luxury watches within the reach of
everyone, is as attractive as the watches themselves as is the very open approach of the business
which means that Chris and the team spend a lot of time communicating personally with our
customers - many of whom have become friends.
As the owner of a Christopher Ward watch, if ever you need to get hold of us we are at your service.
We have listed some useful contact details on the back cover.
There is also always something new going on at our website at www.christopherward.co.uk
and, if you haven’t already discovered the independent forum dedicated to our brand at
www.christopherwardforum.com we would recommend a visit. Informative and fun, it’s a great
place to hear the unexpurgated view of Christopher Ward of London!

Head Office. Christopher Ward (London) Limited, 1 Park Street, Maidenhead
Berkshire SL6 1SL, United Kingdom
Telephone(HeadOffice).[phone]
Customer Services. 0844 875 1515 (UK) 1.877.226.8224 (USA)
Website. www.christopherward.co.uk
General. [e-mail]
Technical. [email protected]