Christopher Ward C60 Trident Bronze Ombre COSC Limited... User guide

C60 Trident Bronze Ombré COSC Limited Edition
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side

22

3
C60 Trident Bronze Ombré COSC Limited Edition
In a world where the mass-produced, the identikit, is celebrated,
isn’t it fantastic to own something unique?
Something like your beautiful C60 Trident Bronze Ombré COSC Limited
Edition.
While every element of your watch has been through an exhaustive
testing programme, on the C60 Trident Bronze Ombré COSC Limited
Edition, individuality takes centre-stage.
And it starts with a bit of deliberate embellishment.
Before the watch is assembled at our atelier in Switzerland, every dial
is hand-distressed by a specialist artisan using a steel-wire brush.
Not only does this give the dial a chic aged look, but also ensures
no one dial is the same as another.
And it’s not the only part of the watch that’s uniquely yours.
The C60 Trident Bronze Ombré COSC Limited Edition’s brushed
bronze Light-catcher™ case will develop a patina over time, much
like the way a pair of jeans fades as the years pass. Some clean this
away (and we’ve produced a video online to show you how), while
others prefer to let the oxidisation process work its magic.
Neither of these quirks aects the performance of your watch,
but you have to be a particular sort of person to appreciate ‘the
perfection of imperfection’. A person, we suspect, rather like your
good self.

4
Features
• Swiss made
• Limited edition of 500 pieces
• Self-winding 26 jewel mechanical
chronometer
• 38-hour power reserve
• Date calendar
• Central hacking seconds
• Anti-shock system
• Twin-ag engraving over ‘Colimaçoné’
nish on the rotor
• Brushed C5191 (CuSn6) bronze alloy case
• Screw-down stainless steel deep stamped
3D backplate
• Embossed screw-down crown
• Unidirectional matte black ceramic bezel
• Super-LumiNova®Grade X1 GL C1 lled
hands, indexes and bezel
• Top-brushed indexes with diamond
polished facets
• Brushed and polished hands
• Signature Trident counter-balance on
seconds hand
• Unique engraved serial number
• Eco-friendly luxury presentation case and
owner’s handbook

5
Technical Information
Calibre Sellita SW200 COSC
Case Bronze C5191 (CuSn6)
Diameter 42mm
Height 13.4mm
Lug to lug 49.3mm
Weight 95.3g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour
Timing tolerance -4/+6 seconds per day
Strap width 22mm

6
How to operate your C60 Trident Bronze Ombré COSC Limited Edition
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Trident Bronze Ombré COSC Limited Edition
has a maximum power reserve of 38 hours when fully wound.
Normal wearing will allow the rotor to start re-powering the
watch over time after putting on your wrist.
• Pull gently into position 3. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date

7
1 2 3 4
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-down position
2. Manual winding
3.Date setting
4.Time setting

8
How to operate your C60 Trident Bronze Ombré COSC Limited Edition
If using the bezel for a dive and let’s say the recognised maximum
“no-stop time” is 55 minutes, then in this example (shown right)
the time at the surface immediately before the dive is 10.08am.
However the bezel marker is at the 12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with the
8 minute position.
• You can now read that the 55 minute no decompression limit
will occur at 3 minutes past the next hour.
Diving with your watch
PLEASE NOTE:
It is always useful and best practice to make a note on a dive slate
before entering the water and to carry a set of dive tables should the
dive plan change during the course of a dive. A safety stop for 3 to 5
minutes at 15ft is recommended at the end of all dives. A safety stop
for 3 minutes at 15ft is required any time you come within 3 pressure
groups of a no decompression limit, and for any dive to a depth of
100ft or deeper.

9
Bezel marker No decompression limit
Start of dive