Christopher Ward The Twelve Halo User guide

The Twelve Halo
Owner’s Handbook

1
Time on your side
Your Christopher Ward watch has been designed in England
and built by hand in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side

22

3
The Twelve Halo
Congratulations on the purchase of your Twelve Halo.
A watch that fuses the sports-luxe aesthetic of The Twelve with the
enduring beauty of 18-carat rose gold. A timepiece whose highly nished
gold bezel adds a tangible dose of glamour to an already beautiful
aesthetic.
The dial has been heavily brushed for a chic, textured look while the removal
of indexes, date window, and seconds hand leaves you to concentrate on
the lume-lled handset and applied twin-ags logo.
At a subtle 36mm, the 12-sided case – with three dierent nishes – will
suit both male and female wrists, and slide comfortably under a cu.
And we won’t blame you if you take the watch o occasionally to gaze
at the Sellita SW200-1 movement through the sapphire case back.
Of course, there’s only one way to appreciate your Twelve Halo:
by strapping it on and taking it out into the world.

4

5
How to operate The Twelve Halo
Crown
Minute Hand
Hour Hand
The Twelve Halo has a maximum power reserve of 38 hours when
fully wound. To re-power the watch after a period of non-use, simply
wind the crown for approximately 20 revolutions. Normal wearing
will very quickly allow the rotor to start re-powering the watch over
time after putting it on your wrist.
Display and controls

6
Features
• Swiss made
• Self-winding 26 jewel mechanical
movement
• 38-hour power reserve
• 18ct solid gold 5N bezel with sandblasted
and polished nish
• Anti-shock system
• Elaboré ‘Colimaçoné’ nish on the
movement
• Super-LumiNova®Grade X1 BL C1 lled
hands
• Vertical brushed dial with applied
twin-ags logo
• Brushed and polished hands
• Anti-reective sapphire crystal
• Brushed, sandblasted and polished
stainless steel case
• Exhibition caseback
• Embossed screw-down crown
• Unique engraved serial number
• Option of a marine-grade stainless steel
integrated bracelet with ‘Christopher
Ward’ engraving, buttery clasp, screw
links and quick-release system for easy
changing or an integrated rubber strap
• Eco-friendly luxury presentation case and
owner’s handbook

7
Technical Information
Calibre Sellita SW200-1
Case Stainless steel with 18ct solid gold 5N bezel
Diameter 36mm
Height 9.95mm
Lug to lug 40.8mm
Weight 61g
Water resistance 10 ATM (100 metres)
Vibrations 28,800 per hour (4Hz)
Timing tolerance -20/+20 seconds per day
Strap width 22mm (integrated)

8
How to operate The Twelve Halo
For a superior water resistance your crown is of the screw-down
type. The crown should sit ush to the case (position 1) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. The Twelve Halo has a maximum power reserve of
38 hours when fully wound.
• Pull gently into position 3. This position is used for handsetting
and stopping of the movement. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time

9
1 2 3
1. Crown screw-down position
2. Manual winding
3.Time setting
Unscrew and gently pull