Christopher Ward C6 Kingfisher Diver-Pro User manual

C6 Kingfisher Diver-Pro
OWNER’S HANDBOOK

Time on your side...
Your Christopher Ward watch has been designed and engineered by highly talented craftspeople to
ensure not only accurate and precise timekeeping but also to bring a real pride of ownership that
only luxury items of the highest quality can ever hope to deliver.
You have made an investment, a good one, and the aim of this handbook is to help you make the
most of that investment during what I hope will be a lifetime of ownership.
Christopher Ward

Caring for your Christopher Ward quartz watch
Your C6 Kingfisher Diver-Pro is constructed from the finest components and materials available
including one of Switzerland’s finest quartz movements.
As with all watches of this quality, with just a little care, it has the potential to become an heirloom
piece giving further joy to future generations.
Here are a few hints to help keep your watch working perfectly over the years:
• Althoughthebatteryinyourwatchmaylastlonger,werecommendyouhaveitchangedevery
2/3 years by a reputable watch repairer.
• Atthesametimeashavingthebatterychangeditmakessensetohavethewatchrepairerclean
and lubricate your watch as necessary.
• Makesurethecrownisscreweddownfullybeforeputtingthewatchintowater.Adhereto
the water resistance ratings towards the end of the handbook to prevent water getting to the
movement which could result in a very costly repair or the need for a replacement movement.
• Yourwatchisshockresistanttominorimpactsbutdroppingfromheightontoahardsurface
may damage the movement.

Should you need a replacement part - don’t worry, we keep stocks of spare parts for years, even for
discontinued models. It’s all part of the Christopher Ward service.
Finally, don’t forget our CW360° Care Programme allows you to return your watch absolutely free,
for any reason, and with no quibbles, for up to 60 days after purchase and we also guarantee your
movement for up to 60 months, so long as it is regularly serviced. After all, why shouldn’t you enjoy
peace of mind as much as you enjoy your watch?
Your watch should also be thoroughly rinsed in fresh water after immersion in salt water.
You must always ensure the crown is fully tightened before any use in water.

The C6 Kingfisher Diver-Pro
Features
5 jewel Swiss quartz movement
4.5mm thick scratch-resistant convex sapphire
crystal glass with anti-reflective coating
Water resistant to 300m (30 atm)
Lockable deployment clasp with wetsuit adjustment
Screw-in crown
2 piece uni-directional bezel
Superluminova filled indices, bezel marker and
hands
Date display
Screw-in case back with engraved NDL (No
Decompression Limit) table, and unique serial
number
Sand blasted, satin brushed and IPK finished solid
316L stainless steel case
Technical Data
Diameter: 42mm
Height: 13.0mm
Weight: 80g - 160g
Case: 316L Stainless steel
Calibre: Ronda 715
Battery type: 371
Accuracy: +20 / -10 seconds per month
Magnetic 18.8Oe
resistance:

Display elements
MinuteHand
Hour Hand
Second Hand
Date
Bezel
Control buttons
Crown
Description of the display and control buttons

Setting the time / date
For a higher water resistance your crown is of
the screw-in type. To get to position , turn the
crown anti-clockwise until it releases itself.
Pull gently into position . For rapid date
correction, turn in a clockwise direction.
From position , pull the crown to position
and adjust the time setting in either a clockwise
or anti-clockwise direction.
After adjusting to the correct time ensure that
the crown is screwed back in until flush with the
case in order that water resistance is maintained.
Please note:
Date correction should not be carried out between
20.00 hr and 02.00 hr as the watch gearing will
already be aligning itself to change the date. The
crown should always be screwed in after adjustment.
1 2
1
1
1
2

A note of caution
A dive watch of this type is NO substitute for a dive computer when diving and should
only be used as a backup device.
Always make sure that you use the proper instrumentation when diving including a depth gauge,
submersible pressure gauge, timer, and have access to decompression tables whenever diving as illus-
trated later in this chapter.
The NDL Table engraved on the back is designed for backup purposes and should only be used by
certifieddiversorindividualsunderthesupervisionofacertifiedscubainstructor.Misuseofthis
product may result in serious injury or death.
Note. Because people differ in their susceptibility to decompression sickness, No Decompression
Table can NOT guarantee that decompression sickness will never occur even though you dive
within the table limits.

Using NDL and recreational dive planner tables
The purpose of Recreational Dive Planner Tables is to make all dives no decompression dives.
Proper planning assures that all dives, single or repetitive, are within the no decompression limits by
controlling the length of the dive, the depth of the dive, and the surface interval between dives.
Use of Recreational Dive Planner Tables require having and using an accurate depth gauge, an
underwater timer, a slate and pencil and the planner itself. You need to know the depth of each
dive so you can determine the maximum time allowed, or you must limit your depth to a specific
planned maximum depth.
Always consult Recreational Dive Planner Tables (eg. PADI or BSAC) before each dive to be sure
you know your no decompression limit. Note the time on an underwater slate and carry it with you
and also note the no decompression limit for the next deeper depth, in case you accidentally exceed
your limit. Remember that your deepest dive is always first, and each successive dive is to an equal
or shallower depth than the preceding dive. If your time limits are short, consider making a shal-
lower dive to permit more time.
As shown on Page 10, a Recreational Dive Planner Table is actually three tables linked together.
Each of the three tables provides information for planning dives within accepted nitrogen levels.