CIGAR HUMIDORS CS65 User manual

CIGAR HUMIDORS
Thank you for purchasing this product. In order to achieve the best
function, please read this product manual carefully before use, so
as to avoid improper use.
For CS 65 CS33 CS50 CS25 User Manual

1
User Manual
Rev.1.1
Safety Precautions....................................................................................................................2
Before Installation and Use of the Cigar Humidor.............................................................. 3
Setting and Use of the Cigar Humidor.................................................................................. 5
Working and Principle of the Cigar Humidor........................................................................7
Daily Use and Maintenance of the cigar humidor............................................................... 8

2
Safety Precautions
Please read the following content before you use the cigar humidor
There are potential hazards in the operation of any electrical appliance. For the sake
of safety, please read the manual carefully and operate discreetly when you operate
this product.
Do not use any power source other than 220V or connect multiple electrical
appliances on the same wiring board.
An independent power socket should be used for the cigar humidor, and the
voltage should match the nameplate.
Ensure separate and effective grounding for the cigar humidor.
-This will ensure the best performance and prevent overload of indoor
circuits, which may lead to overheating of wires and fire.
Do not unplug the power plug by pulling the power cord. Please hold the plug
firmly and unplug it from the power plug directly.
-Damage to the power cord may cause short circuit, fire or electric shock.
Make sure that the power cord plug is not crushed or damaged by the back of
the cigar humidor.
Do not fold the power cord in half or place heavy objects on the power cord.
-This is a fire hazard.
Do not use any loose sockets or power cords with cracks or surface wear.
If the power cord is damaged, please contact the merchant for repair or
replacement immediately.
Please be careful not to crush or damage the power cord when you move the
cigar humidor. Do not touch the power plug with wet hands.
Remove any foreign matter and dust from the power plug.
-Otherwise, there is a fire hazard.
Please make sure to use a separate and reliable grounding power supply, and do
not share the socket with other electrical appliances. To ensure the safety in use,
the socket and its connecting wires must be able to withstand the current above
10A.
The cigar humidor must be grounded.
-This is to prevent power consumption or leakage caused by leakage of the
cigar humidor.
Do not use gas pipes, telephone lines or other hidden lightning rods as
grounding.
-Improper grounding may cause electric shock.
Do not disassemble or repair the cigar humidor by yourself.
-This may lead to fire, machine failure or personal injury.

3
-If the cigar humidor cannot be used normally due to disassembly by yourself,
the cigar humidor will no longer bear the warranty policy and other losses
caused by the inability of the cigar humidor to work.
Do not place the machine near the electric heater or radiator, or in a place with
direct sunlight.
Please do not place any heat-generating objects such as candles, ashtrays,
aromatherapy, flammable gases or explosive substances near the product.
Do not place any container containing water on this machine, as this may cause
fire or electric shock.
Do not expose this machine to rain or near water (for example, near bathtub,
basin, kitchen sink, laundry sink, damp basement, or near swimming pool and
balcony). If the machine gets wet accidentally, please unplug the power plug
immediately and dry it with a dry cloth. When you clean it, please wipe it with
more than 75% medical alcohol, and do not wipe it with a water-containing rag,
so as to avoid mildew of wooden structure and bacterial growth.
All parts of this machine are not operated by batteries.
Do not allow children to climb on this product.
The front of this machine is whole tempered glass. Please do not bump with
sharp objects, so as to avoid breakage of the glass door.
Please do not place this product in unstable positions, such as shaking shelves,
inclined ground or positions affected by external vibration.
Do not drop or impact the product. If the product is damaged, please disconnect
the power supply and contact the merchant
Unplug the power cord from the power socket and wipe it with a soft dry cloth.
Do not wipe the power cord with any chemicals such as wax, benzene, alcohol,
thinner, insecticide, air cleaner, lubricant or cleaner after cleaning. This may
cause short circuit of power supply contact and fire.
Before Installation and Use of the Cigar
Humidor
Please follow the steps related to installing the cigar humidor in the
manual strictly, so that you can use your cigar humidor safely.
Open the package of the cigar humidor and check whether the cigar humidor is
damaged. At the same time, check whether all accessories are complete. If the
cigar humidor is damaged or the accessories are incomplete during shipment,
please contact the merchant immediately.

4
Accessories include:
-Whole machine *1
-Manual *1
-Keys * 2
The product is a whole machine, which can be used without installing
accessories.
The product is semiconductor refrigeration, which can be directly electrified
without standing still.
If you feel peculiar smell after opening the glass door of the cigar humidor, it is
due to the smell of cedar wood and new product itself. Wipe the cedar wood
shelf inside the product with alcohol and open the door to ventilate for more
than 12 hours, so that you can get rid of the peculiar smell inside the product.
The product dissipates heat through the back plate. In order to achieve the
necessary heat dissipation effect, please provide necessary ventilation
conditions.
-Please clean the dust screen every two months.
-Do not cover the back of the product with cloth or other materials.
-Do not put the machine beside the bed, so as to avoid the influence on
sleep caused by the sound of the machine running.
-Do not place this machine in restricted spaces, such as bookcases or
embedded cabinets, unless there is proper ventilation. Or contact the
merchant for solutions before purchasing.
-When you use and place the product, pay attention to keep the distance of
more than 5CM between the back and the wall.
After the product is electrified, it needs to run for 24 hours before putting in
cigars.
-The cedar wood shelf in cigar humidor needs to absorb enough moisture
and the inner air duct board needs to be wet enough to achieve ideal
operation effect. Absorption of water requires a process.
Introduction of the cigar humidor Structure
The top of cigar humidor is temperature setting and display.
The bottom of cigar humidor is humidity setting and display.
The back fan is a cooling fan.
There are two fans at the bottom, the humidifying fan on the left (started when
humidifying) and the dehumidifying circulating fan on the right (started when
dehumidifying and circulating in the cabinet).
The bottom iron plate is a water receiving plate.
4 cedar wood shelves are built-in.
-In case of naked cigar humidors, the two box-shaped shelves at the bottom
are cedar wood naked shelves, inside which cigars can be put nakedly
directly. Cigars can't be kept nakedly in non-naked cigar humidors.

5
-Two pieces of transparent acrylic sheets in the manual bag are used for
sealing the naked box cover.
Setting and Use of the Cigar Humidor
Once the cigar humidor is ready, you can set up and use all the functions of the cigar
humidor.
By following these steps, your cigar humidor can run safely. If it doesn't work, please
check the power supply or try troubleshooting at the back of the user's guide. If
there are still problems, please contact the merchant.
Description of Keys on Control Panel
Applicable Model: NC65A
Up key
Increase the value when you set the
temperature and humidity value
Down key
Decrease the value when you set the
temperature and humidity value
Lights on/off
Click to turn on/off the lights in the
cabinet
After the temperature or humidity of cigar humidor is set, the system will
automatically confirm after blinking for 5 seconds, with no need to press a key to
confirm.
Temperature and humidity setting of cigar maintenance in cigar humidor.
-The recommended temperature setting is 18℃to 20℃. Cigar eggs are easy
to hatch above 25℃.
-The recommended humidity setting is 65% to 70%.
Calibration function of temperature and humidity display.

6
-Because there will be deviation when each thermometer displays
temperature and humidity, the cabinet provides calibration function.
-When the temperature and humidity display of cigar humidor is deviated
from that of your thermometer and hygrometer, the following operations
can be performed to calibrate the temperature and humidity display.
-It is recommended that the cigar humidor is calibrated after at least 3 days
of operation.
Calibration operation of cigar humidor.
-Within ten seconds after unplugging the power supply and reconnecting the
power supply, press and hold the humidity setting up key. After three
seconds, a number "0" will be displayed on the humidity display board of
the cigar humidor, and calibration can be performed at this time.
Calibration principle.
-For example, when the humidity of cigar humidor is set and 65% is displayed,
your hygrometer displays humidity of 70%. You can enter the humidity
calibration option and add 5 when the humidity calibration shows 0. It is
equivalent to that the cabinet display needs to be 5% higher to match your
hygrometer display.
-On the contrary, if the humidity of cigar humidor shows 70% and your
hygrometer shows 65%, you need to reduce it by 5% in the humidity
calibration option.
-Temperature calibration is not supported at present.
Adding water to the tank.
-At the bottom of the cigar humidor, there is a cigar humidor water tank. The
cigar humidor is a temperature and humidity dual-control product, so it
needs to add water or reduce water according to the actual situation before
it can be used normally. If the water tank is short of water, the humidity of
cigar humidor may not reach the set value.
-It is recommended to add about 50ML of water to the water tank. If too
much water is added, it is easy to cause large humidity fluctuation or
inability to dehumidify of the cabinet.
-Please add purified water or distilled water to the water tank, but do not
add tap water, so as to avoid scale and impurity bacteria pollution.
-It is recommended to clean the water tank once every 15 days to once a
month to replace the water in the water tank.
-The cigar humidor adopts the working principle of internal circulation, that
is, the condensed water generated during refrigeration will flow back to the
water tank, so it is normal for the water tank not to decrease during use.
Lights on.
-The built-in lights of cigar humidor are top cold light LED tubes. The lights
need to be turned on by pressing the key, and it is impossible to turn on
them automatically when opening the cabinet door.

7
-Built-in lights are used for lighting without other functions and effects.
Turning on and off the lights does not affect the operation of temperature
and humidity in the cabinet.
Complete the above operations and start the cigar maintenance journey.
Naked cigar humidors come with two cedar cigar boxes, into which the cigar can
be put directly for naked maintenance.
It is not recommended to keep cigars naked in non-naked cigar boxes.
-No matter how stable cigar humidors are, they work by fans, and the long-
term direct blowing of cigars by fans will cause dry outside and wet inside.
-When the door of cigar humidor is opened and closed, the temperature and
humidity in the cabinet will fluctuate greatly, and naked cigars will be
affected by the great fluctuation.
Working and Principle of the Cigar
Humidor
In order to achieve the best temperature and humidity effect of cigar humidor, it is
suggested that the best working environment temperature of cigar humidor is 15℃-
32℃.
Some working information and principles of cigar humidor in operation.
The temperature and humidity displayed in the cigar humidor are the current
real-time temperature and humidity in the cabinet. After setting the
temperature and humidity you need, it will jump to the real-time temperature
and humidity display, and the product will operate to reach the temperature
and humidity you set slowly.
-It takes several hours to complete this process.
If the display board displays other characters and icons, please contact the
merchant technical center for processing. Do not install or disassemble by
yourself to avoid personal injury.
Refrigeration of cigar humidor.
-The cigar humidor adopts semiconductor (electronic) refrigeration mode
with no need of any refrigerant. There is no need to add any refrigerant
during use.
-In air-cooled mode, the cigar humidor will not be frosted on the back plate.
-However, condensed water will be generated, and the condensed water will
flow back to the bottom water tray.
Heating of cigar humidor.

8
-The cigar humidor has heating compensation function, and the maximum
temperature compensation is 10-15℃. If the temperature in the use
environment is too low, the cigar humidor cannot reach the set
temperature, please move the product to a higher temperature
environment for use.
-The heating mode of cigar humidor is the PTC heater in the lower right
corner of the bottom. We have designed that the bottom shelf will not
touch the rear heating part, so don't change the placement of the bottom
shelf at will. Please put cigars within range of the cabinet shelf.
Humidification of cigar humidor.
-The cigar humidor converts the moisture in the bottom water tank into
humidity and supplements it into the cabinet through the humidification fan
on the left side of the bottom. Therefore, it is recommended to use purified
water or distilled water to prevent impurities from polluting cigars. After
adding water to the water tank, observe the water in the water tank. If it is
found that the water tends to the right side, adjust the foot of the cabinet
properly so that the cabinet is placed horizontally.
Dehumidification of cigar humidor.
-Semiconductor start-up refrigeration condenses air humidity into water
droplets, and then the water droplets are recycled to the bottom water tank
through the return pipe, forming an internal circulation and reducing water
consumption.
Daily Use and Maintenance of the cigar
humidor
Because of the climate differences in different regions, there will be some
differences in the use of cigar humidors. Please adjust the cigar humidor according
to your own situation. If the adjustment status is still unsatisfactory, please contact
the merchant.
In humid areas:
If the room temperature is higher than the set temperature of cigar humidor,
because the air is humid, it is unnecessary to add water to the bottom water
tray. You can set the temperature and humidity directly and then use it.
If the glass door of cigar humidor is opened and closed frequently, the cigar humidor
will refrigerate frequently, resulting in a large amount of condensed water flowing
back to the bottom water tray. If the bottom water tray stores too much water, it is
necessary to dump the water, so as to avoid the phenomenon of large humidity
fluctuation or inability to dehumidify.

9
When the room temperature is lower than the set temperature, it is necessary
to add a small amount of 50ML purified water to the bottom water tray to reach
the set humidity value and then start heating.
In dry areas:
In areas with drier climate, after receiving the cigar humidor, you should add 50-
100ML purified water to the water receiving plate and then electrify it normally.
If the glass door of cigar humidor is opened and closed frequently, the cigar humidor
will heat frequently, or the dry environment outside the cabinet will cause water loss.
If the bottom water tray stores too little water, it is necessary to replenish water in
time, so as not to cause the humidity to fail to reach the set value.
Daily Problems and Solutions of the cigar humidor
The display flashes when the temperature or humidity of the cigar humidor does
not come down. (It is easy to happen in humid areas)
-There is too much water in the bottom water tray, so reduce or dump the
water in the water tray.
The temperature or humidity of the cigar humidor does not go up.
-The cigar humidor has humidity overdrying protection. The premise of
heating in winter is that there is water in the water tray and the humidity is
higher. Because the humidity will be very dry when heated under the
condition that the water tray has no water, you can add a small amount of
water of about 50ML to the bottom water tray.
The cigar humidor is too noisy.
-The back-cooling fan resonates, make sure the screws near the fan are
tightened.