Citizen C20501 User manual

Please read this manual carefully
before using this TV set and keep it
for future reference.
USER MANUAL
C20501
Pure Flat Screen
Stereo Television
20"

PRECAUTIONS
FCC WARNING-This equipment may
generate or use radio frequency
energy.Changes or modifications to this
equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction
manual.The user could lose the authority
to operate this equipment if an
unauthorized change or modification is
made.
LASER SAFETY
This unit employs a laser.Only a qualified
service person should remove the cover
or attempt to service this device,due to
possible eye injury.
CAUTION:USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.DO NOT
STARE INTO BEAM.
LOCATION:INSIDE,NEAR THE DECK
MECHANISM.
CONTENTS
Warning and cautions............................................................................1
Installation..............................................................................................4
..............................................................................4
Preparation of the remote control..........................................................4
Function buttons and .......................................5
Front panel of the TV set......................................................................5
Rear panel of the TV set.......................................................................5
Using the remote control.......................................................................6
Menu
.........................................................................17
Specifications ......................................................................................18
Warranty................................................................................................19
Antenna Connection
External Connections
Functions
Connection to the external audio and video equipment...................16
Troubleshooting guide
......................................................................................7

Important safety Instructions
WARNING:TO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DONOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRICSHOCK
DO NOT OPEN
CAUTION: TO REDUCETHE RISK OFELECTRIC
SHOCK, DO NOTREMOVE COVER (OR BACK).
NO USER SERVICEABLEPARTS INSIDE.REFER
SERVICING TOQUALIFIED SERVICE PERSONNEL
THIS SYMBOL INDICATES THATDANGEROUS
VOLTAGECONSTITUTING ARISK OF ELECTRIC
SHOCK IS PRESENTWITHIN THIS UNIT.
THIS SYMBOL INDICATES THATTHERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THELITERATURE
ACCOMPANYING THEAPPLIANCE.
The important noteis located on the rear ofthe cabinet.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safetyand operating instructionsshould be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety andoperating instructions shouldbe retained forfuture reference.
3. HEED WARNINGS
All warnings onthe unit andin the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating anduse instructions shouldbe followed.
5. CLEANING
Unplug this unitfrom the walloutlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
Use a dampcloth for cleaningthe exterior cabinet only.
6. ATTACHMENTS
The manufacturer ofthis unit doesnot make any recommendations for attachments, as they
may cause hazards.
7. WATER AND MOISTURE
Do not usethis unit nearwater. For example, near a bathtub, washbowl, kitchen sink,
laundry tub, ina wet basement,or near a swimming pool.
8. ACCESSORIES
Do not placethis unit onan unstable cart, stand, tripod, bracket, or table. The unit mayfall,
causing serious injury, and seriousdamage to theunit.
(symbol provided byRETAC)
8A. Anappliance and cartcombination should be moved with care. Quick
stops, excessive force,and uneven surfacesmay cause theappliance and
cart combination tooverturn.
9. VENTILATION
Slots and openingsin the cabinetback or bottom are provided for ventilation, and to ensure
reliable operation ofthe unit, andto protect it from overheating. These openings mustnot be
blocked or covered.The openings should never beblocked by placingthe unit ona bed,
sofa, rug, orother similar surface.This unit should never beplaced near orover a radiatoror
heat source. This unit shouldnot be placed in a built-ininstallation such as a bookcase or
rack unless properventilation is providedor the manufacturer'sinstructions have been
adhered to.
10. POWER SOURCE
This unit shouldbe operated onlyfrom the type of power source indicated on the rating plate.
If you arenot sure ofthe type of power supply to your home, consult your appliance dealer or
local power company. For unitsintended to operatefrom battery power, or other sources,
refer to therespective pages inthis Owner's Manual for their operating instructions.
S3126A

Important safety Instructions
22
11. GROUNDINGOR POLARIZATION
This unit isequipped with a polarized alternating-current line plug (a plug having one blade
wider than theother). This plugwill fit intothe power outlet only one way. This isa safety
feature. If youare unable to insert the plug fully into the outlet, try reversingthe plug. If the
plug should stillfail to fit, contact your electrician to replace your obsolete outlet. Insteadof
the polarized alternating-current line plug, your unit may be equipped with a 3-wire
grounding-type plug (aplug having a third (grounding) pin). This plug will only fit into a
grounding-type power outlet.This too, isa safety feature.If you are unable to insert the plug
into the outlet,contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose ofthe grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords shouldbe routed so that they are not likely to be walked onor pinched
by items placedupon or against them, paying particular attention to cords at plugs,
convenience receptacles, andthe point where they exit from the appliance.
13. LIGHTNING
Toprotect your unit from a lightning storm, or when it is leftunattended and unused for long
periods of time,unplug it from the wall outlet and disconnect the antenna or cablesystem.
This will preventdamage to the unit due to lightning and power line surges.
14. POWER LINES
An outside antennasystem should not be located in the vicinity of overhead power linesor
other electric lightor power circuits, or where it can fall onto or against suchpower lines or
circuits. When installingan outside antenna system, extreme care should be taken to keep
from touching suchpower lines or circuits, as contact with them might be fatal.
15. OVERLOADING
Do not overloadwall outlets and extension cords, as this can result in a riskof fire or electric
shock.
16. OBJECT AND LIQUID ENTRY
Do not pushobjects through any openings in this unit, as they may touch dangerousvoltage
points or shortout parts that could result in fire or electric shock. Never spillor spray any
type of liquidinto the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outsideantenna or cable system is connected to the unit, be sure theantenna or cable
system is groundedto provide some protection against voltage surges and built-up static
charges, Section 810of the National Electrical Code (NEC), ANSI/NFPA70, provides
information with respectto proper grounding of the mast and supporting structure,
grounding of thelead-in wire to an antenna discharge unit, size of grounding conductors,
location of antennadischarge unit, connection to grounding electrodes, and requirements
for the groundingelectrode.
18. SERVICING
Do not attemptto service this unit yourself as opening or removing covers may exposeyou
to dangerous voltageor other hazards. Refer all servicing to qualified service personnel.

Important safety Instructions
19. DAMAGE REQUIRINGSERVICE
Unplug this unitfrom the walloutlet and refer servicing to qualified service personnel under
the following conditions:
a. When thepower-supply cord orplug is damaged.
b. If liquidhas been spilled,or objects have fallen into the unit.
c. If theunit has beenexposed to rain or water.
d. If theunit does notoperate normally by following the operating instructions. Adjust
only those controlsthat are coveredby the operatinginstructions, as an improper
adjustment of othercontrols may resultin damage andwill often require extensive
work by aqualified technician torestore the unit to its normal operation.
e. If theunit has beendropped or the cabinet has been damaged.
f. When theunit exhibits adistinct change in performance, this indicates a need for
service.
20. REPLACEMENT PARTS
When replacement partsare required, besure the service technician uses replacement parts
specified by themanufacturer or thosethat have thesame characteristics as the original part.
Unauthorized substitutions mayresult in fire,electric shock orother hazards.
21. SAFETY CHECK
Upon completion ofany service orrepairs to this unit, ask the service technician to perform
safety checks todetermine that theunit is in proper operating condition.
22. HEAT
The product shouldbe situated awayfrom heat sources such as radiators, heat registers,
stoves, or otherproducts (including amplifiers)that produce heat.
23. CONNECTING
When you connectthe product toother equipment, turnoff the power and unplugall of the
equipment from thewall outlet. Failureto do so may cause an electric shock and serious
personal injury. Read theowner's manual of the other equipment carefully and follow the
instructions when makingany connections.
24. SOUND VOLUME
Reduce the volumeto the minimumlevel before you turn on the product. Otherwise, sudden
high volume soundmay cause hearingor speaker damage.
25. SOUND DISTORTION
Do not allowthe product outputdistorted sound for a longtime. It may cause speaker
overheating and fire.
26. NOTE TO CABLE TVSYSTEM INSTALLER
This reminder isprovided to callthe Cable TV system installer'sattention toArticle 820-40 of
the NEC thatprovides guidelines forproper grounding and, in particular, specifies that the
cable ground shallbe connected tothe grounding system of the building, as close to the point
of cable entryas practical.

Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
may vary.
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna cable
together with any mains lead.
AC power socket
Mixer
(not incl.)
Antenna/ CATV input
75 standard
coaxial type
Preparation for the remote control
Battery installation
Tips for remote operation
Remove the battery cover.
!When the remote control will not be used for a long period of time or when the
batteries are worn out, remove the batteries to prevent leakage.
! Do not throw the batteries into fire. Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the remote control.
Insert two size AA batteries matching the
+/-polarities of the battery to the +/- marks
inside the battery compartment.
!
!

Function Buttons and External
Connections
Back panel
Power switch
Power indicator
Sensor window
MENU
/
(input selector
AV TV Volume up/ down
Channel selector
Antenna input socket
Audio left channeloutput terminal
Audio right channeloutput terminal
Audio left channelinput terminal
Audio right channelinput terminal
Video input terminal
Video output terminal
OUT
IN
VIDEO L R
AUDIO
Front and side panel of the TV set
Audio Input
terminal
VIDEO
R
L
AUDIO
Video Input
terminal

Using the Remote Control
1. : To turn power ON or OFF
2. MENU: You can select the menu by pressing the
MENU button. You can call on the menu by
pressing the corresponding button on the remote
control.
3. CH+/-: You can go up and down the channels by
pressing CH (+) button and CH (-) button. This
button can also be used in adjusting the functions
in
4. VOL+/-: You can increase the volume by pressing
VOL (+) button and decrease VOL(-) button.
5. CHANNEL NUMBER BUTTON: Direct channel
tuning
6. RECALL: This feature allows you to recall the
previously viewed channel.
7. -/--: Digital Selector
1 One Digit Channel Select: When you want to
select one digit channel ,press 0 and other digit.
2)Two Digit Channel Select: When you want to
select two-digit channel. Press the digit select
button twice , then enter the two digits .
3)Three Digit Channel Select: When you want to
select a three digit channel . Press the digit select
twice , then enter the three digits .
8. TV/AV: TV/AV selection
9. CCD Press CCD button to set the C.Caption
(Closed Captioned) ON or OFF.
10. MUTE: Press key to Activate/deactivate Mute
Function
11. P.STD: By pressing this exclusive personal
preference button, you can select different preset
brightness shades for various viewing environments.
12.
13.
the Menu Mode.
This
button can also be used in adjusting the function
selections in the Menu Mode.
EXIT Exit TV Menu
DISPLAY: Display receiving channel
6
1
78 9
23
45
0
RECALL
TV/AV
CCD
EXIT
MUTE
P.STD
DISPLAY
-/--
MENU CH+
VOL- VOL+
CH-
21
43
5
67
8
9
10
11
12 13
Buttons on the remote control

Menu Functions
Video Setup:
Pressing MENU buttononce will bring the Video Setup menu onthe TV.
The following is shown on your TV screen:
Follow the procedure below to adjust the picture quality of your choice:
1.Press the CH(+) and CH(-) button to go up and down the menu.
2.Press the VOL(+) and VOL(-) button to increase and decrease the level to your
preference for eachitem.
Adjustment of Picture Quality:
To adjust the picture quality from the factory preset read the following:
Picture: By increasing the level. It will adjust white areas of picture and by
decreasing the level , it will adjust black areas of picture.
Brightness: By increasing the level, it will add more light to dark parts of the picture
and by decreasing the level, it will add more dark to light parts of the
picture.
Color: By increasing the level. It will adjust the low and the high level of the
picture.
Sharpness: By increasing decreasing the level, it will show cleaner and clearer
images and by decreasing the level, it will make picture smoother.
Hue: You can adjust the tint of the picture by going into picture set up menu.
By decreasing the level, it will give red tint to skin color and by
increasing the color it will give green tint to skin color.
Color Temp : By pressing the VOL(-/+) buttons to select the three setting A)Neutral,
B)Warm,C)Cool.
Picture 70
Color 50
Sharpness 40
Hue 50
Color Temp. Neutral
Brightness 32
Video
Information to user: This television receiver is equipped with
close caption decoder and parental blocking technology as
required by the FCC.
Menu Functions

Audio Setup:
By pressing MENUbutton ,and then pressing VOL(-/+) buttonsit will bring you to
Audio Setup display. You will see the following menu on your TV screen:
Follow the procedurebelow to adjust the sound quality:
Press VOL (+) button to increase and VOL (-)button to decrease the level to your
preference.
Audio
Volume 45
Timer Setup:
By pressing MENUbutton ,and then pressing VOL(-/+) buttonsit will bring you to
Timer Setup display. Youwill see the following menu on your TV screen:
Follow the procedure below to select one of the above options:
1.Press the CH(+) and CH(-) button to go up and down the menu.
2.Press VOL (+) button or VOL (-) button to select your preference.
Clock: Press VOL (-/+) buttons for HOURS and VOL(-/+) buttons for MINUTES
adjustment.
Time-On: Press VOL(-/+) buttons for HOURS and VOL (-/+) buttons for
MINUTES adjustment. This feature works like an alarm clock. Your
TV will turn on at the set time.
Ch. Select: This feature switches you to your favorite channel at the appropriate
set time. Press VOL(+) and VOL(-) buttons to select the channel.
Time-Off : Press VOL (+/-) buttons for HOURS and VOL (+/-) buttons for
MINUTES adjustment. This feature works like an alarm clock. Your TV
will turn off at the set time.
Sleep Time: This feature allows you to turn off television in pre-selected minutes
(180, 170,160, ........,10 and 0).
Remind Time: Press VOL(+/-) buttons to set HOURS of attention and VOL (+/-) buttons
to set MINUTES of attention. You will see the flashing time on your TV
when the reminder time arrives. Note: This exclusive feature can
remind you of important chores while watching TV.(e.g. Time to take
pills, time to check cooking, time to call , time to do homework ,etc.)
Ch. Switch: This feature lets you store your favorite channel. Once you store the
channel number in this function, when the set time is up, it will switch
over to the set channel. This feature is used with the Exchange feature.
Press VOL(+) or VOL(-) button to select the channel.
Timer
Time-on 18:00
Ch. Select 1
Time-off --:--
Sleep Time 0
Remind Time --:--
Ch. Switch 1
Clock 17:18
Menu Functions (Continued)

Follow the procedurebelow to select one of theabove options:
1.Press the CH(+) and CH(-) button to go up and down the menu.
2.Press the VOL(+) and VOL(-) button to increase and decrease the level to your
preference for eachitem.
Language: Use VOL(-/+) buttons to select the OSD in either English, French or
Spanish.
Background: Press the VOL (-/+) buttons to select between Background ON or
Background OFF. When the Background ON function is chosen, a
moving "NO SIGNAL" sign will be displayed if there is no input signal
to the set.
Black Stretch: PressVOL (-/+) buttons to turnthe Black Stretch feature on oroff.
When the Black Stretch function is on the screen automatically in
creases the contrast range.
VNR: Press VOL (-/+) buttons to turnthe VNR function on or off. VNR is a
term for Video Noise Reduction, a built-in device on the set that reduces
video noise interference so the viewer is assured a clear picture.
Fade: The FADE controlallows for the picture tube towarm up andgently turn
on,
VOL(+) button orVOL (-) button to
set it ON or OFF.
C.Caption: Press VOL (-/+) buttons to select the Closed Caption options. Closed
Captioning helps the hearing impaired with the broadcast program, as
well as helpingchildren learn how to read. A builtin decoder displays
the audio portion of a program as text on the screen when this option is
selected.
which can help prolong the life of the picture tube.
AVL: Automatic Volume Limit control reduces effect of large volume changes
such as when the ads come on.Press
OFF: When off is displayedon TV means C.Caption is turned off.
CC1: When CC1displays on TV means C.Caption is turned on.
CC2 to CC4: For other modes of video related broadcast information.
T1: For program guide andother information displayed by broadcasters.
(This blocks a large portion of the picture on yourscreen).
T2 to T4 :For other modes ofinformation displayed by broadcasters.
(This blocks a large portion of the picture on yourscreen).
Note: Select CC1 for full translation of the primary language such as English in your
area. Select CC2 for secondary language translation such as French or any other
language that may be broadcast in your area.
Function Setup:
By pressing theMENU button, and then pressing VOL(-/+)buttons will bringyou to
Function Setup menu. You will see the following menu on your screen:
Setup
Demo Mode: This will displaythe main functions of the TV set.
Language English
Background on
VNR on
Fade off
AVL on
C. Caption on
Demo mode
Black stretch on
Menu Functions (Continued)

Channel setup:
By pressing MENUbutton ,and then pressing VOL-/+ buttonit will bring you to
Channel Setup. You will see the following display on TV screen.
Channel
Antenna TV
Skip off
Current Ch. 2
Fine
Auto Program
Channel System Auto
Follow the procedurebelow to select above options:
1.Press the CH(+) and CH(-) button to go up and down the menu.
2.Press VOL (+) button or VOL (-) button to select your preference.
Channel System: Press the VOL(-/+) buttons to select the correct channel system.
In general, you can set it as "AUTO" AUTO,NTSC and NTSC443
will display inturn
Antenna: Press VOL(+) button or VOL(-) button toselect TV or CATV.
Skip : Press VOL(+) button or VOL(-) button to add or delete the channel
from the stored memory.
Current Ch. : Press VOL(+) button to go up and VOL (-) button to go down to set
the channel position. The display will show the current playing
channel.
Channel Coverage by Antenna:
Antenna Type Channel Range
VHF 2-13
UHF 14-69
CATV 1-125
Fine: If thepicture and/or sound are poor,try using the FINE TUNE
feature. Do not use this feature unless receptionis poor.Press
VOL (+/-) to start the Fine Tune function.
Auto Program: PressVOL (+) button to autoprogram in channels. This search
automatically adds onlythe active channels in your areato the TV's
memory. It deletes any channels on which there is no broadcast or
a poor signal.
Note: The Auto Search function will scan the channels on the selected antenna
input. If the TV is connected to cable, please select Cable under Antenna.
Menu Functions (Continued)

Calendar:
Your TV has been designed with a calendar. By pressing MENU button ,and then
pressing VOL(-/+) buttons it will bring you to Calendar. You will see the following
display on TV screen.
Calendar
OCT
OCT
OCT
Follow the procedurebelow to adjust the Calendar quality:
1. +/-) buttonsPress the CH( to select the year item, the month itemor the dateitem.
2. Press the VOL(-/+) buttons to change calendar setup .
3. Press EXIT button to exit the calendar mode.
Solar 2005 9 14
Menu Functions (Continued)

V-CHIP Setup:
Press the MENU Button on your remote control to go to Password menu, then input
the password (0000). It will bring Parental Lock set up display on the screen. You
will see the following menu on your screen:
This function enables you to lock certain TV channels in accordance to the V-CHIP
requirement established by the FCC.
To set the V-CHIP function:
Select the TV Rating option. You will see the TV Rating menu on your TV screen:
1.Press CH(+/-) buttons to go up and down the menu.
2. Press VOL(-/+) buttons to go into TV Rating and Movie Rating menus.
3.Press VOL(-/+) buttons to set the Parental Lock ON and Parental Lock OFF.
When TV rating is selected, you will see the following rating table on your TV screen.
Note: You can press CH(+/-) buttons to go up and down the menu, then press VOL(+)
button to select "B" or "U' .
Parental Lock
Parental Lock off
TV Rating
MPAA Rating
Lock Menu
Change Password
Passsword
Password ----
TV Rating
Rating FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
D L S V
U U U U
U U U U
U U U
U
U
U
U
U
U
>
U
Menu Functions (Continued)

When MPAA Ratingis selected, you will see thefollowing rating tableon your TV
screen.
Parental Lock off means the lock function is turned off . If the Parental Lock is in
"off" mode then V-CHIP function will not be active to accept the V-CHIP signal.
Parental Lock on means the lock function is turned on. If the lock is in the "on"
mode then V-CHIP function is activated to accept the V-CHIP signal.
Password
The "Default Password" preset by the manufacturer is "0000" . If you want to change
the preset password to your own password, just choose any four digits that can be
easily remembered and set. Once you set password for a particular channel, that
channel will be blocked. This channel can only be accessed with the password.
MPAARating
G U
PG U
R U
NC-17 U
X U
PG-13 U
Lock Menu
AV Lock: When it is set ON, you can not use the AV.
Program Lock: When it is set ON, the current channel is locked, you can not see
the program of this channel.
Note: You can press CH(+/-) buttons to go up and down the menu, then press VOL(+)
button to select "B" or "U' .
Menu Functions (Continued)

V-Chip Technology:
The "V-Chip Technology" allow you to use U.S. And Canada Movies and TV
PROGRAMS Guide ratings to block certain types of TV programs and movies.
To understand clearly about TV programs rating codes, read the following list:
U.S. TV Program Ratings
NR: Not Rated-this means that programs are not rated or rating does not apply.
TV-Y: For all children-this type of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed for older children - this type of rated programs may include comedic
violence of mild physical, or may frighten children under the age of 7.
TV-G: General Audience-this type of rated programs contains little or no
violence, no strong language, and little or no sexual dialogue and situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexual dialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-this type of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only-this type of rated programs may contain sexual
violence, explicit sexual content and profane language.
FV: This type of rated programs contain Fantasy and cartoon violence.
Violence: This type of rated programs contain violence.
S: This type of rated programs contain sex.
L: This type of rated programs contain offensive language.
D: This type of rated programs contain dialogue with sexual content.
Menu Functions (Continued)

To understand clearly about movies rating codes, read the following list:
U.S. Movies Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G: General Audience-this type of movie rating means all ages admitted to see
the movie.
PG-13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R: Restricted- This type of movie rating means children under 17 of age requires
to be with parent or guardian.
NC-17:This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
To understand clearly about Canadian programs rating codes, read the
following list:
Canadian English Rating Chart
E: Exempt - this type of rated programs contain news, sports, documentaries, talk
shows, music videos, and variety of other programs.
C: This type of rated programs are intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:This type of rated programs generally considered acceptable for children 8
years and over. There is no profanity, nudity or sexual content.
G: This type of rated programs generally suitable for all audiences.
PG: Parental Guidance Suggested -in this type of rated programs, some material
may not be suitable for children.
14+: In this type of rated programs, some content may not be suitable for viewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs by pre-teens and early teens.
18: Adults Only-this type of rated programs are only for adult viewers only.
Menu Functions (Continued)

Connecting the TV set to the other video and audio equipment
The figure belowshows how to connect external equipmentusing AV signals.
There is also an AV input on the side of your television. Use the Left Audio input
(white terminal on the TV), if you are connecting equipment with mono sound. The
MONO sound willbe delivered by both left andright speakers.
Connection of AV input /output terminal
DVD PLAYER
VCR
Audio right
output
Audio left
Video
Audio right
input
Audio left
Video
output
output
input
input
Audio left output
Audio right output
Video output
DVD player
VCR
VIDEO
R
L
AUDIO

Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
PICTURE SOUND CHECKING
The aerial direction and connection
Ensure that thepower supply isconnected to
the TV setand turned on. Also ensure that the
TV set isnot in "Listen Mode" or that the
brightness and contrastare not turneddown.
Adjust colour control
Adjust channel again
Colour Purity isa fault thatcan be caused by moving the
TV set, placingmagnets near theTV screen or turning
on/off house holdappliances such as vacuum cleaners
near the TVset. Turn the TV off with the main power
switch for 15minutes. When thepower is turned on
again the TVset will automatically degauss the picture.
In severe casesleave the TVset turned offover night.
Picture with snow Noise
Colour Spot Normal volume
Scramble Normal or Weak Volume
No colour Normal volume
No Picture No sound
No soundNormal
Normal
Disturb Noise
Double or Triple Image
Note:
1.If the fault can not be corrected using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Electrical interference whichcan be causedby cars,
motorbikes etc, Fluorescentlamps and dirty
insulators on overheadpower cables.
This is called"ghosting" and canbe minimized with
an outside aerial,and good qualitycable and
terminations. Altering the aerial direction can also
minimize this effect.
Volume Sound mute

Specifications
Specifications
The specifications offered you here are for reference only. With product improvement
there may be some differences between the description and the final product.
NTSC
AC 120V~ 60Hz
M
70W
Picture tube
Model
Colour system
Sound system
Sound output power
Power requirements
Power consumption
Dimension WDH
2X2W 10% THD
20 colour picture tube
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
C20501
Accessories
Remote control X1
Owner's manual X1
Battery(AA) X2
603 Width x475 Depth x430 Height mm