User manual
User manual
Pag. 5
MANAUL WATERING.
1) turn the FREQUENCY dial to manual. The LED ashes during manual watering (100 ml dispensed).
2) early stop: turn the “FREQUENCY” selector dial to the start position (e.g. 1 day).
3) early stop: Turn the “FREQUENCY” selector dial to a new frequency (e.g. 2 days).
4) If the “FREQUENCY”selector dial is set to manual and watering has nished, the LED remains o and the timer
will not water automatically until programmed again.
SETTING CHANGES.
CHANGING START TIME AND/OR FREQUENCY OF WATERING CYCLES. Wait for the new time at which you
want watering to begin (for example 22:00). Set the “FREQUENCY” selector dial to “OFF” and wait for the LED to
switch o. Set the “FREQUENCY” selector dial to the frequency required. After resetting, watering will begin
immediately for the set water quantity; the next watering cycles will begin after the number of days set using
the “FREQUENCY” selector dial.
CHANGING THE QUANTITY OF WATER DISPENSED. Increase or decrease the quantity set by turning the“DRIP-
PER” selector dial; the change will take eect from the next watering cycle. If the operation is carried out while
watering is under way, watering will cease when the set quantity is reached (if the quantity has been reduced)
or it will continue (if the quantity has been increased) with immediate eect.
Aqua-Magic System (code): 8063
Aqua-Magic System (code): 8063
Aqua-Magic System
Aqua-Magic System
1
12
23
3
1
12
2
OFF
8063 AQUA-MAGIC
FREQUENCY
ml x
DRIPPER
1
day
1
(+6h)
day
2
days
3
days
4
days
5
days
7
days
40
100
ml
ml
80
ml
100
ml
120
ml
160
ml
140
ml
180
ml
200
ml 60
ml
OFF
8063 AQUA-MAGIC
FREQUENCY
ml x
DRIPPER
1
day
1
(+6h)
day
2
days
3
days
4
days
5
days
7
days
40
100
ml
ml
80
ml
100
ml
120
ml
160
ml
140
ml
180
ml
200
ml 60
ml
OFF
8063 AQUA-MAGIC
FREQUENCY
ml x
DRIPPER
1
day
1
(+6h)
day
2
days
3
days
4
days
5
days
7
days
40
100
ml
ml
80
ml
100
ml
120
ml
160
ml
140
ml
180
ml
200
ml 60
ml
Turn the “FREQUENCY” selector dial to the start position
(e.g. 1 day): previous programming is stored, therefore
the watering cycles will start at the normal times. When
turning the dial to the previous frequency, do not stop for
more than 3 seconds on any other frequency as this will
be considered a new setting.
Turn the “FREQUENCY” selector dial to a new frequency
(e.g. 2 days): the previous setting is NOT stored.
Watering will begin immediately and the next watering
cycles will begin after the number of days set using the
“FREQUENCY” selector dial.
OFF
8063 AQUA-MAGIC