Clair de Lune Wicker User manual

3
Cleaning Instructions
BASKET: Sponge lightly with warm water and mild detergent
MATTRESS: If necessary wash by hand in warm water and mild
detergent. Dry away from direct heat or sunlight. Do not tumble dry.
Do not dry clean.
DRESSING: See care label on product.
Please read all instructions carefully and keep for future reference.
WARNING: This product is only suitable for a child who cannot sit unaided,
roll over and cannot push itself up on its hands or knees. Maximum weight
of the child 9 Kg.
Before picking up the carrycot, make sure both handles are secure in the
hand of the carer.
Use only on rm, horizontal level & dry surface.
The head of the child in the carry cot should never be lower than the body
of the child.
WARNING: Do not let other children play unattended near the carrycot.
WARNING: Do not use if any part is broken, torn or missing.
Use only replacement or approved parts supplied by the manufacturer.
WARNING: Do not leave exible carrying handles inside the carry cot.
WARNING: Maintaining a safe distance from the strong heat sources
such as electric bar res, gas res, etc in the near vacinity of moses basket.
If the mattress is purchased separately, it shall t well into the product and
the depth from the top of the side of the product should be less than
170mm when the mattress is in position of use.
Do not add another mattress on top of the mattress provided.
The handles and the bottom should be inspected regularly for signs of
damage & wear.
If the moses basket is intended to be used with a stand, then it should be
checked that the stand is the appropriate size to accommodate the base
of the moses basket. Base size min-max 700-835mm in length and
300-370mm in width.
When the stand is not in use it should be stored away from children
Please ensure all ttings are accounted for and that nothing is left in the basket
which may create a serious hazard to a baby.
Attaching a hood to your Wicker basket
CLAIR DE LUNE
DEDICATED CUSTOMER CARE HELPLINE
0161-491-9800
TELEPHONE DIRECT FOR SPARE PARTS OR ASSEMBLY PROBLEMS

WICKER BASKET - HOOD ASSEMBLY INSTRUCTIONS
Your components and ttings
x 2 Screws x 4 Washers x 2 Wing Nuts x 2 Nyloc Nuts
x 2 Hood Runners with
attached hood
x 1 Flat head screwdriver
PLEASE CHECK YOU HAVE THE FITTINGS SHOWN BELOW.
Please note: The quantities below are the correct
amount to complete the assembly.
Position of Components
Inside of the
basket
Outside of
the basket
ABC D E
A
B
B
C
D
E
Find the existing hole in your wicker
basket and insert a screw and washer
through from the inside of the basket.
FRONT
BACK
FRONT
BACK
Step 1 - Inserting screw and washer
1 X (A) & 1 X (B)
Step 2 - Inserting the runners
Then attaching the
FRONT runner on
top of the BACK
runner. It is essential
that BACK runner is
attached rst,
followed by the
FRONT
Having located the
screw with the washer
attached from the
inside of the basket,
now attach the BACK
runner E outside of the
basket.
The locking Nyloc nut should be tightened with
a pair of plyers so that it locks and cannot be
undone using nger pressure.
Please note: if the hood of the moses basket
does not stay up,tighten the wing nut slightly.
The Nyloc nut is used for extra security to keep
the wing nut in place.
1 X (C) & 1 X (D)
Attach the Wing nut and the
locking Nyloc nut
12
Repeat process, 1, 2 & 3 to attach hood to the
otherside of the wicker basket.
Step 3 - Attaching Wing nut & Nyloc Nut
Please note: For safe keeping the hood ttings and xtures are stored in the back of the mattress.