Clarion CZ501A User manual

Owner's manual & Installation manual
使用说明书 & 安装手册
사용설명서 및 설치설명서
Bluetooth® CD/USB/MP3/WMA RECEIVER
蓝牙 ® CD/USB/MP3/WMA 接收机
Bluetooth® CD/USB/MP3/WMA 수신기

1
English
1. FEATURES........................................................................................................................2
Expanding Systems...........................................................................................................2
2. PRECAUTIONS .................................................................................................................3
Front Panel / Generalities..................................................................................................4
USB Port ...........................................................................................................................4
Remove the DCP ..............................................................................................................5
Attach the DCP..................................................................................................................5
3. CONTROLS .......................................................................................................................6
Operational Panel..............................................................................................................6
Names of Buttons..............................................................................................................6
Remote Control (RCX001)................................................................................................7
Notes of remote control using ...........................................................................................7
4. CAUTIONS ON HANDLING ..............................................................................................8
Handling Discs ..................................................................................................................8
5. OPERATIONS....................................................................................................................9
Basic Operations...............................................................................................................9
System Setup..................................................................................................................10
Audio Setup.....................................................................................................................11
Radio Operations ............................................................................................................12
CD/MP3/WMA Operations ..............................................................................................13
USB Operations ..............................................................................................................15
iPod & iPhone Operations...............................................................................................16
AUX Operations ..............................................................................................................17
Bluetooth Operations.......................................................................................................18
6. TROUBLE SHOOTING....................................................................................................20
7. ERROR DISPLAYS..........................................................................................................21
8. SPECIFICATIONS ...........................................................................................................22
9. INSTALLATION / WIRE CONNECTION GUIDE.............................................................23
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
Contents

English
2
1. FEATURES
• Built-inBluetooth®Handsfree(HFP)andAudioStreaming(A2DP&AVRCP)
• 4V/6chRCAOutputwithHPF/LPFandBEAT-EQwith3BandParametric
Equalizer
Expanding Systems
PortablePlayer
(ConnectviaAUXINJack)
USBMemory
(ConnectviaCCA-755)
Bluetooth®
cellularphone
4ChannelAmplier
Expandingaudiofeatures
iPod/iPhone
(ConnectviaCCA-748)
Note:
• The items listed outside of the frames are the commercial products generally sold.
• CCA-748 and CCA-755: Sold by separately.

3
English
2. PRECAUTIONS
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the inside of the car is very cold and
the player is used soon after switching
on the heater, moisture may form on the
disc or the optical parts of the player and
proper playback may not be possible.
If moisture forms on the disc, wipe it off
with a soft cloth. If moisture forms on
the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
3. This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
4. “Made for iPod,” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod, or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
iPhone and iPod are trademarks of Apple
Inc., registered in the U.S. and other
countries.
WARNING
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:127070006874TX-1062B-A
65 mm
65 mm
65 mm
65 mm
531-1629kHz 87.5-108MHz
CHINA
PN:127070006890TX-1062K-A
051 722 877
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:127070006867TX-1062K-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:127070007356TX-1062K-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006821TX-1073E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006835TX-1073E-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006868TX-1073E-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
051 722 877
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070007338TX-1073E-D
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070007334TX-1073E-E
03 2120
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070007341TX-1073E-F
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
CHINA
530-1710kHz 87.9-107.9MHz
Bluetooth QD ID No.: B017439
THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
HD Radio™, HD Radio Ready™, and the HD Radio Ready logo are proprietary
trademarks of iBiquity Digital Corporation.
PN:127070006861TX-1058B-A
FCC ID:AX2CZ501
65 mm
65 mm
CHINA
530-1710kHz 87.5-107.9MHz
THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:127070006889TX-1059B-A
HD Radio Technology manufactured under license from iBiquity Digital
Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio,
and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.
65 mm
65 mm
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006894TX-1070E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2142
Bluetooth QD ID No.: B017439
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006900TX-1070E-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2142
Bluetooth QD ID No.: B017439
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006856TX-1070E-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2142
051 722 877
Bluetooth QD ID No.: B017439
65 mm
65 mm
531-1629kHz 87.5-108MHz
CHINA
PN:127070006899TX-1058K-A
051 722 877
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
Bluetooth QD ID No.: B017439
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:127070006878TX-1058K-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
Bluetooth QD ID No.: B017439

English
4
Front Panel / Generalities
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the set from
drinks, umbrellas, etc. Doing so may
damage the internal circuitry.
• Do not disassemble or modify the set in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
• If a problem should occur, have the set
inspected at your store of purchase.
• The remote control unit may not work if
the remote control sensor is exposed to
direct sunlight.
Cleaning the body
• Use a soft, dry cloth and gently wipe off
the dirt.
• For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
• Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
USB Port
• The USB memory stick may stick out
when inserted, so it may cause danger
during driving.
When connect USB memory stick to the
main unit, please use a USB extension
cable (CCA-755).
• T h e U S B m e m o r y st i c k s m u s t be
recognized as “USB mass storage class“
to work properly. Some models may not
operate correctly.
 Whenthememorizeddataislostor
damagedbyanychance,Clarionshall
notbeliableforanydamage.
When using an USB memory stick, we
recommend that you backup your data
stored on it before using a personal
computer etc.
• Data les may be broken when using USB
memory sticks in the following situation:
When disconnecting the USB memory
stick or turning the power off during
reading data.
When affected static electricity or electric
noise.
Connect/disconnect the USB memory stick
when it is not accessed.
• Connecting with the computer is not
covered.

5
English
Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
W e r e c o m m e n d t a k i n g t h e D C P
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1. Press the [SRC / ] button (1 sec.) to turn
off the power.
2. Deeply push in [OPEN] button to unlock
the DCP.
3. Hold the side popped out, remove the
DCP.
Attach the DCP
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
Hold the DCP, as shown in the gure below,
and put it into the supplied DCP case.
Storing the DCP in the DCP Case
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
• Once the [OPEN] button is pressed and
DCP is unlocked, car vibrations can cause
the DCP to fall
• The connector for the main unit and
DCP is extremely important. Be careful
not to damage it by pressing on it with
ngernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
DCP case
DCP

English
6
[SRC/ ]
[OPEN] [VOLUME] [1~6] AUXJack
[SOUND] [ISR] [D]
[SRC / ]Button
• Power / Toggle the audio source
[BAND / ]Button
• Select tuner band / Dial / Answer
[MENU / ]Button
• MP3/WMA mode – Search function.
• BT mode – Terminate call
• CD mode – No function.
• RADIO mode – No function.
• AUX mode – No function.
[ ]Button
• Press to eject disc.
[ , ]Buttons
• Previous / Next track
• Search (long press)
[Open]Button
• Unlock the front panel.
[PS/AS]Button
• Scan play / Preset scan
• Auto memory store (long press)
[SOUND]Button
• Sound effect setting
[VOLUME]Knob
• Adjust volume level / Conrm (press)
[ISR]Button
• Recall ISR station stored in memory and store
current station in ISR memory (long press)
[1~6]Buttons
• [1] Button: Scan play / Preset station 1.
• [2] Button: Repeat play / Preset station 2.
• [3] Button: Random play / Preset station 3.
• [4] Button: Play / Pause / Top play (long
press) / Preset station 4.
• [5] Button: Previous folder / Preset station 5.
10 tracks down (long press)
• [6] Button: Next folder / Preset station 6.
10 tracks up (long press)
[D]Button
• Display switch
• System setup (long press)
[MIC]Hole
• Internal microphone
3. CONTROLS
Operational Panel
Names of Buttons
[,]
[ ]
[BAND/ ]
[MENU/ ] [PS/AS] DiscSlot USBConnector
[MIC]

7
English
Remote Control (RCX001)
Notes of remote control using
Inserting the Battery
1. Slide remote control unit’s rear cover in
the direction shown.
2. Insert battery (CR2025) into insertion
guides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
1. Aim the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3. DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4. Use “button shaped” lithium battery
“CR2025” (3V) only.
5. DO NOT subject battery to recharge,
disassemble, heat or dispose in re or water.
6. Insert the battery in proper direction
according to the (+) and (-) polarities.
7. Store the battery in a place where children
cannot reach to avoid the risk of accident.
[SRC / ]Button
• Toggle the audio source
• Power on / Power off (long press)
[ , ]Buttons
• Preset station up/down
• Previous / next track
• Search (long press)
[SCN/PS/AS]Button
• Scan play / Preset scan
• Auto memory store (long press)
[BAND/TOP]Button
• MP3/WMA mode – Top play (long press)
• CD mode – Top play (long press)
[ , ]Buttons
• Volume up / down
[]Button
• Play / Pause
[ISR]Button
• Recall ISR station stored in memory
• Store current station in ISR memory (long
press)
[DISP]Button
• Display switch
[RDM]Button
• Random play
[RPT]Button
• Repeat play
[MUTE]Button
• Mute the volume
Insertion guide
[BAND/TOP]
[,]
[ ]
[DISP]
[ISR]
[RDM]
[RPT]
[,]
[MUTE]
[SCN/
PS/AS]

English
8
Handling Discs
4. CAUTIONS ON HANDLING
Handling
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
• Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc. Use of such
discs may cause misoperation or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
Storage
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Cleaning
• To remove ngermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
• Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
Foryoursafety,thedrivershouldnotinsert
orejectadiscwhiledriving.
Ball-point pen
Roughness

9
English
5. OPERATIONS
Basic Operations
Note:
• Refer to the diagrams in “3. CONTROLS”
when reading this chapter.
CAUTION
Whentheunitisturnedon,startingand
stoppingtheenginewithitsvolume
raisedtothemaximumlevelmayharm
yourhearings.
Becarefulaboutadjustingthevolume.
Power on / off
Notes:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
Engine ON
position
2. Press the [SRC / ] button on the front
panel or the remote control to turn on the
power under standby mode. The unit goes
back to the last status after power on.
3. Press and hold the [SRC / ] button on
the front panel or the remote control to
turn off the power.
Mute
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Note:
Doing the operation above again or adjusting
volume will release muting.
Volume adjustment
Turn the [VOLUME] knob on the front panel
or press the [ ] or [ ] button on the
remote control.
The adjustable range of volume is 0 to 40.
CAUTION
Whiledriving,keepthevolumelevelat
whichexternalsoundscanbeheard.
Playing source selection
Press [SRC / ] button on the front panel or
remote control repeatedly to choose desired
playing source.
Notes:
Playing source selection means selecting
work mode, such as DISC mode, RADIO
mode, AUX mode, etc.
Display system time
Press the [D] button on the front panel or
[DISP] button on the remote control to switch
the display information, system time and
playing source.
RESET
Note:
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
RESET

English
10
At all mode, press and hold [D] button to
enter system setup. Press [ ] or [ ] button
to select options, rotate the [VOLUME] knob
to adjust.
CLOCK
Press the [VOLUME] knob to enter clock
setting mode, rotate the [VOLUME] knob to
set clock, press [ ] or [ ] button to select
hour or minute, press and hold the [VOLUME]
knob to conrm.
DX/LO(RADIOmode)
Rotate the [VOLUME] knob to choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can
be received.
• DX: Stations with strong and weak signals
can be received.
AUXSENS(AUXmode)
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
PIN CODE
Rotate and press the [VOLUME] knob to
choose a 4-digit password. Press the knob
more than 1 second to conrm.
SCRNSVR:ON/OFF
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON or OFF.
SCROLL:ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK-
>FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press [DISP] button.
S-CTRL(IPODmode):ON/OFF
Rotate the [VOLUME] knob to choose S-CTRL
(Simple Control) ON or OFF.
* Refer to P16.
System Setup
SW PHASE
Rotate the [VOLUME] knob to choose SUB-
WOOFER phase REVERSE or NORMAL.
DIMMER:ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
• ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
BEEP:ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound ON or OFF.
12/24H
Rotate the [VOLUME] knob to choose time
format: 12 or 24 hour.
MICSEL(BTmode)
Rotate the [VOLUME] knob to choose
Microphone EXTERNAL or INTERNAL.
MICGAIN(BTmode)
Rotate the [VOLUME] knob to choose Mic
gain: 1, 2, 3, 4, 5.
You can change the gain of MIC when a
telephone partner cannot hear your voice.

11
English
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to changes
BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Rotate the [VOLUME] knob to changes
CUSTOM, and press the [VOLUME] knob,
the press [ ] or [ ] button to select it
including: BAS-G -> BAS-F -> BAS-Q ->
MID-G -> MID-F -> MID-Q -> TRE-G ->
TRE-F, rotate the [VOLUME] knob to select a
value.
BAS-G / MID-G / TRE-G: (-7)- (+7)
BAS-F: 50/100/200
BAS-Q: 0.7/1/1.4/2
MID-F: 500/1K/2K
MID-Q: 0.7/1/1.4/2
TRE-F: 5k/10k/15k
TRE-Q 0.7/1/1.4/2
Press the [SOUND] button, then press
[] or [ ] button to select USER preset
including:
BALANCE -> FADER -> M-B EX -> LPF(low
pass lter) -> S-W VOL (Subwoofer Volume),
rotate the [VOLUME] knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-BEX: ON/OFF
LPF: THROUGH/60/90/120
HPF:THROUGH/60/90/120
SUBW VOL: (-6)-(+6)
Audio Setup

English
12
Select tuner as playing source
Press [SRC / ] button once or more to
enter RADIO mode.
Select one radio band
Press the [BAND] button on the panel or on
the remote control to select one radio band
among FM1, FM2, FM3 and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] or [ ] button on the
panel to tune in a higher / lower station.
Press the [ ] or [ ] button on the
remote control to tune in preset stations.
Auto tuning
Press and hold the [ ] or [ ] button to
seek a higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
button for 1 second or longer, otherwise the
auto store function is engaged and the unit
starts storing stations.
Auto store
Only stations with sufcient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.) to
start automatic station search.
To stop auto store, press other buttons
having radio functions.
Radio Operations
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ501A can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [D] button on the front panel, then
press [ ] button repeatedly until LO or DX
displays on the screen, rotate the [VOLUME]
knob to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.

13
English
having the same name.
Folderstructure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Numberoflesorfolders
1. Up to 999 files can be recognized per
folder.
Up to 3000 les can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks
may not always be played in the order
displayed on the PC.)
3. Some noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [ ] button, ejects the disc
even if the power to the unit was not turned
on.
Notes:
• If you force a CD into before auto
reloading, this can damage the CD.
• If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC / ] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
• Discs without the or
TEXT
mark and
CD-ROMs cannot be played by this unit.
• Some CD-R/CD-RW discs may not be
usable.
This unit can play back MP3/WMA
les
Notes:
If you play a WMA file with active DRM (Digital
Rights Management), no audio is output.
TodisableDRM
(DigitalRightsManagement)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy music tab,
then under Copy settings, unclick the Check
box for Copy protect music. Then, reconstruct
les.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/
WMA le
Usablesamplingratesandbitrates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
Fileextensions
1. Always add a file extension “.MP3”,
“.WMA” to MP3, WMA le by using single
byte letters. If you add a file extension
other than specified or forget to add the
le extension, the le cannot be played.
2. Files without MP3/WMA data will not play.
The les will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR les are played, the play time
display may differ the play location.
* When MP3/WMA les are played, a little
no sound part is caused between tunes.
Logicalformat(Filesystem)
1. When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
“ISO9660 level 1, 2 or Joliet or Romeo” or
Apple ISO as the writing software format.
Normal play may not be possible if the
disc is recorded on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
byte alphabetical letters and numerals
(including an extension).
3. Do not afx a name to a le inside a folder
CD/MP3/WMA Operations

English
14
CD/MP3/WMA Operations
Pausing play
1. Press the [ 4 ] button on the front panel or the
[ ] button on the remote control to pause
play.
“PAUSE” appears in the display.
2. Press the above button again to resume CD
play.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [D] button to change the title display.
MP3/WMAdisc
FILE --> FOLDER --> TITLE --> ARTIST -->
ALBUM -->FILE -->
Notes:
• If MP3/WMA disc is not input TAG, “NO
TITLE” appears in the display.
• Only ASCII characters can be displayed in
Tags.
Selecting a track
Track-up
1. Press the [ ] button to move to the
beginning of the next track.
2. Each time you press the [ ] button, the
track advances to the beginning of the
next track.
3. For MP3/WMA disc, press and hold the
[6] button (1 sec.) to move ahead to +10
tracks.
Track-down
1. Press the [ ] button to move back to
the beginning of the current track.
2. Press the [ ] button twice to move back
to the beginning of the previous track.
3. For MP3/WMA disc, press and hold the [5]
button (1 sec.) to move back to -10 tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [ ] button .
Fast-reverse
Press and hold the [ ] button .
* For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some error may occur in
the play time.
Folder Select
This function allows you to select a folder
containing MP3/WMA les and start playing
from the rst track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2. To select a track, press the [ ] or [ ]
button.
Search Function
1. Press the [MENU] button to enter FOLD
SCH mode. Press the [VOLUME] button
to enter the folder list search mode.
2. Turn the [VOLUME]knob to select a folder.
3. Press the [VOLUME] button to enter the
file list search mode. And then the track
list appears in the display.
4. Turn the [VOLUME]knob to select a track.
5. Press the [VOLUME]knob to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Top function
The top function resets the CD player to the
rst track of the disc. Press and hold the [ 4 ]
button (1 sec.) to play the rst track (track No.
1) on the disc.
* In case of MP3/WMA, the rst track of the
current folder will be played.
Other various play functions
Scanplay
This function allows you to locate and play
the rst 10 seconds of all the tracks recorded
on a disc.
Press the [ 1 ] button to perform scan play.
Repeatplay
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until “FOLD
RPT” appears on the LCD to cancel repeat
playback.

15
English
MP3/WMA:
1. Press the [ 2 ] button once or more until
“TRK RPT ” appears on the display to
perform repeat play, and “RPT” segment
lights on.
2. For MP3/WMA files, press [ 2 ] button
repeatedly until “FOLD RPT” appears on
the display for folder repeat play.
3. Press [ 2 ] button repeatedly until “RPT
CD/MP3/WMA Operations
1. Open the cover of the USB connector to the
right. Insert a USB cable (CCA-755) into
the USB connector. Insert a USB device
into the USB cable.
When connecting a USB device, the unit
will read the les automatically.
2. To remove the USB device, you should rst
select another source or turn off the power,
in order to avoid damaging the USB device.
Then take off the USB device. Close the
cover to the left.
3. Operation is same as MP3/WMA operation.
USB Operations
OFF” appears on the display to cancel
repeat playback, and “RPT” segment goes
o.
Randomplay
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random play.
CCA-755

English
16
iPod & iPhone Operations
Connect an iPod or iPhone to the USB
connector via CCA-748 cable.
When connecting a device, the unit will read
the files automatically. The track information
display on the screen once playback start.
MENU
In the S-CTRL OFF mode, press [MENU]
button,rotate the [VOLUME] knob select
“MUSIC” or “VIDEO”.
Select “MUSIC”, press the [VOLUME] knob,
then rotate the[VOLUME]knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press and rotate the
[VOLUME]knob to select a desired option,
then press the [VOLUME]knob to conrm.
Select “VIDEO”, press the [VOLUME] knob,
then rotate the [VOLUME] knob to show
MOVIES / MUSIC / VIDEOS / TV SGIWS /
VIDEO PODCASTS / RENTALS, press and
rotate the [VOLUME]knob to select a desired
option, then press the [VOLUME]knob to
conrm.
NOTE:
• In case of VIDEO Playback, CCA-748
cable and monitor (sold separately) are
required.
• VIDEO MENU item is different by the
model of connected iPod and language
setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press [ 3 ] button repeatedly until “ALBUM
RDM” appears on the LCD for album random
play.
2. Press the [ 3 ] button once or more until
“SONG RDM” appears on the LCD to
perform random play.
3. Press [ 3 ] button repeatedly until “RDM
OFF” appears on the LCD to cancel
random playback.
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is “ OFF “.
1. Press and hold [ D ] button to enter system
setup.
2. Press [ ] or [ ] button to select
“ S-CTRL“.
3. Rotate the [VOLUME] knob to select
“ ON “ or “ OFF “ .
• ON: Operations are made through your
iPod.
• OFF: Operations cannot be made
through your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are
performed too quickly, unforeseen errors
may occur.
• When performing iPod operations using
simple control mode, please do not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
• Some iPod models do not support this
function. Consult your nearest Clarion
dealer or website to conrm which models
do not support this function.
to monitor
CCA-748

17
English
Press [SRC / ] button on the panel or
remote control to select “AUX”.
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
AUX Input sensitivity setting
1. Press and hold the [D] button (1 sec.).
2. Turn the [VOLUME] knob to select “AUX
SENS”.
3. If the output level of connected external
audio player is “HIGH”, rotate [VOLUME]
knob and choose “LOW”. And if the output
level is “LOW”, choose “HIGH”.
AUX Operations
iPod & iPhone Operations
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1. Press the [MENU] button to select the iPod
menu mode.
2. Press the [VOLUME] knob to switch
between categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO
PODCASTS, RENTALS
3. Press the[VOLUME] knob. (The contents
of the category are displayed.)
4. Press and hold the [ D ] button (1 sec.).
5. Rotate the [VOLUME] knob to select the
desired letter to search.
6. Press the [ D ] button again to next perform
search.

English
18
Bluetooth Operations
The Bluetooth allows you to utilize your car’s
built-in audio system for wireless mobile
phone or music handsfree communication.
Some Bluetooth mobile phones have the
audio features, and some portable audio
players support Bluetooth feature. This
system can play audio data stored in a
Bluetooth audio device. The car stereo with
Bluetooth will be able to retrieve phonebook
contacts, received call, dialled call, missed
call, incoming calls, outgoing call and listen
to music.
Note:
• Do not leave the microphone of Bluetooth
handsfree in the places with wind passing
such as air outlet of the air conditioner,
etc. This may cause a malfunction.
• If leave it in the places subjected to
direct sun, high temperature can cause
distortion, discoloration which may result
in a malfunction.
• This system will not operate or may
operate improperly with some Bluetooth
audio players.
• Clarion cannot guarantee the compatibility
of all mobile phones together with the unit.
• Audio playback will be set to the same
volume level as set during telephone call.
This might cause problems, if extreme
volume level is set during telephone call.
Handsfree Operations
Pairing
1. Turn on Bluetooth function of your mobile
phone.
2. Enter mobile phone’s Bluetooth setup
menu.
3. Search for new Bluetooth devices.
4. Select CZ501 from the pairing list on the
mobile phone.
5. Enter “0000” as the password.
6. After pairing successfully, the unit will
enter Bluetooth mode automatically, and
“BLUETOOTH CONNECTED” will appear
on the LCD.
Making a call
OperationfromBluetoothmenu
Press the [SRC / ] button to switch the
source to “BLUETOOTH”. Press [MENU / ]
button to select a way to make outgoing call:
•DialNumber
1. Press the [MENU / ] button.
2. Rotate the [VOLUME] knob on the front
panel to select "DIAL NUMBER".
3. Press the knob to enter the selected Dial
Number.
4. Rotate the [VOLUME] knob to select a
number, press the knob to confirm and
ready to input the next digit. Repeat the
above until all numbers inputted.
5. Press the [BAND / ] to dial.
6. Press [MENU / ] to terminate call.
•Dialled/Missed/ReceivedCallHistory
You can search any Dialled/Missed/Received
Call History.
1. Rotate the knob to select “DIALLED”,
“MISSED” or “RECEIVED”.
2. Press the knob to enter the selected call
history.
3. Rotate the knob or press the [ ] or [ ]
button on the remote control to scroll the
contacts.
4. When the contact name or mobile phone
No. is displayed, press the [BAND / ]
button to call the mobile phone No. of that
contact.
* Press the [MENU / ] button to end the
call.
•CallfromPhonebook
User can search the contact name in the
phonebook and make call.
1. Rotate the knob to select “SIM PHONE
BOOK” or “MEMORYPHONEBOOK“.
2. Press the [VOLUME] knob to enter the
selected phonebook.
3. Use the [ ] or [ ] button on the remote
control or rotate the [VOLUME] knob to
scroll the contacts.
4. When the contact name is displayed, press
the [BAND / ] button to call the mobile

19
English
Bluetooth Operations
phone No. of that contact.
* Press the [MENU / ] button to end the
call.
Note:
Some cellular phones may not be able to
transfer the Phone Book data.
•Answeringacall
You can answer an incoming call by pressing
the [BAND / ] button.
* Press the [MENU / ] button to reject an
incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the car’s speakers. Please
consult your nearest Clarion dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Pleaseavoidoperatingyourconnected
mobile phone while audio streaming as
thismaycausenoiseorsoundchoppyon
thesongplayback.
Audiostreamingmayormaynotresume
af ter te le phone  in terru pt  as thi s i s
dependentonmobilephone.
SystemwillalwaysreturntoRadiomode
ifaudiostreamingisdisconnected.
Note:
Be sure to read the chapter “Pairing” before
proceeding.
Play / Pause a track
1. Push the [ 4 ] button to pause audio
playback.
2. To resume audio playback, push the [ 4]
knob again.
Selecting a track
Track-up
1. Press the [ ] button to move to the
beginning of the next track.
2. Each time the [ ] button is pressed,
playback proceeds to another track in the
advancing direction.
Track-down
1. Press the [ ] button to move the to
beginning of the previous track.
2. Each time the [ ] button is pressed,
playback proceeds to previous track in the
reverse direction.
Note:
Playing order will depend on Bluetooth audio
player. When [ ] button is pressed, some
A2DP devices will restart the current track
depends on the duration of playback.
During music streaming playback, “A2DP”
will be shown on the display. Information
about tracks (e.g. the elapsed playtime, song
title, etc.) cannot be displayed on this unit.
When A2DP device is disconnected, “BT
DISCONNECT” will be shown on the display
and return to previously selected audio
source. Some Bluetooth audio players may
not have play / pause synchronized with this
unit. Please make sure both device and main
unit are in the same play / pause status in BT
MUSIC mode.