Clarity S-615 User manual

1
Issue 4, June 1995
[phone]
S-615 AND S-650 PAGING HORNS
INTRODUCTION
The S-615, and S-650 are Paging Horns for use with
any Clarity Mixer-Amplifier. The S-615 (15 watts) is a
combination 25/70V paging horn. The horns can be
used for interior or exterior paging applications. The
S-650 is a combination 25/70V, 30 watt Bi-Axial
paging horn.
These instructions contain the specifications and
information necessary to install, operate, and maintain
the horns.
SPECIFICATIONS
Applications
- Clarity Paging Systems
- Existing 25 or 70V Paging Systems
Features
- Combination 25/70V transformer
- Weatherproof
- All metal construction (S-615);
S-650 Projector structural foam and driver
is all metal construction
- Grey baked epoxy finish
- Fully adjustable 360 degrees horizontal and
160 degrees vertical
- Rotary switch for tap selection
Environment
Temperature: 0-50 Degrees C
Humidity: 0-85%
Horn Taps Switch Setting
S-615, 25/70V 25V 70V
15 Watts 7 5
7.5 Watts 6 4
3.8 Watts -- 3
1.8 Watts 5 2
.9 Watts 4 1
.48 Watts 3 --
Switch Setting
S-650, 25/70V 25V 70V
30 Watts -- 5
15 Watts 7 4
7.5 Watts 6 3
3.7 Watts 5 2
1.8 Watts 4 1
Specifications
Frequency Response and Maximum Power
Handling Capability
S-615 275-14K15 Watts
S-650 120-14K30 Watts
SPL @ 4FT at Rated Output
S-615 121dB
S-650 127dB
Line Voltage 25/70V
Cabling
When using the S-615 or the S-650, two conductor
shielded cable is recommended for horn connections.
NOTE: When shielded cable is used, the shield should
be connected to the Ground terminal located on the
back of the amplifier.
TECHNICAL ASSISTANCE
When trouble is reported, verify there are no broken
connections leading to the unit.
Assistance in troubleshooting is available from the
factory. When calling, you should have a VOM
available and be calling from the job site. Call 1 (540)
427-3505 and ask for an Applications Engineer.
CLARITY equipment is not field repairable.
CLARITY maintains service facilities in Roanoke, VA.
Should repairs be necessary, please call CLARITY at
1 [phone] for a Return Authorization Number.
947411

2
LIMITED WARRANTY
Clarity warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a
period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund
of any such defective device within the warranty period, provided that:
1. Inspection by Clarity indicates the validity of the claim;
2. The defect is not the result of damage, misuse, or negligence after the original shipment;
3. The product has not been in any way repaired by others and that factory sealed units are unopened
(A service charge plus parts and labor will be applied to units defaced or physically damaged);
4. Freight charges for the return of products to Clarity are prepaid;
5. All units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs
(Major repairs will be subject to additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties expressed or implied, and in no event shall Clarity be liable
for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with
the purchase, operation or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the
carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the
F.O.B. point.