CLD CLDWL05 User manual

SKU# CLDWL05 CLDLED.COM
1
WHAT’S INCLUDED:
1 X LED Work Light
1 X U Mount Bracket
Mounting Hardware
4" ROUND WORK LIGHT
FLOOD BEAM
CLDWL05
FEATURES & SPECIFICATIONS:
Light Output: 3,969 Lumens
Power: 32W @ 13.6V DC
Current: 2.3A @ 13.6V DC
Voltage: 10 - 36V DC
Beam Pattern: Flood Beam
MOUNTING BRACKET INSTALL INSTRUCTION

SKU# CLDWL05 CLDLED.COM
2
HARNESS INSTALL INSTRUCTION
Wiring Harness sold separately
1. Determine and suitable mounting locations to install the LED work lights, wiring harness and switch.
Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at
connections is required.
2. Connect positive wire and negative wire properly. Press the switch to test if the lights are
functioning properly.
3. Adjust the light to the desired angle and then secure by tightening all mounting screws.