Mighty Bright MiniFlex 2 User manual

MiniFlex 2
LED Light User Guide

Read all instructions prior to using your new product.
USING YOUR MINIFLEX 2 LED LIGHT:
• Turn on or off the light by sliding the power switch
forward or backward. The sliding switch is located on
the top of the light head.
• Your MiniFlex 2 LED light uses energy efcient LEDs
which will never need to replaced.
• MiniFlex 2 is powered by 2 CR2032 batteries, (included).
• To replace or insert new batteries, gently slide the
battery door toward the top of the base using the
indented circle on the back of the light. Be sure you
insert the batteries using the positive (+) and negative
(-) guides imprinted inside the battery compartment.
SAFETY INFORMATION:
• This product is not a toy and is not intended for children
under 13 years of age.
• Do not stare directly into the LEDs or shine them into the
eyes of others.
• Do not attempt to remove or replace the LEDs.
• Improper use of this or any other battery operated
product may cause batteries to leak or explode,
which may result in chemical burns and/or personal
injury.
If any amount of battery leakage comes in contact,
directly or indirectly, with skin, eyes, inside of mouth, or
anywhere on body: 1) immediately ush the affected
area with plenty of cool, running water (do not use hot
water). 2) Contact your local doctor, Poison Control
Center, or hospital emergency room, or call the 24 hour
National Button Battery Ingestion Hotline at: 1-202-625-
3333, which accepts collect calls from both the US and
Canada. Also, give the hotline number to your doctor
or hospital emergency room. If injury appears serious,
call: 911.
Two LEDs
Sliding power switch
Flexible neck
Dual-function variable
width clip
Battery compartment

Two LEDs
Sliding power switch
Flexible neck
Dual-function variable
width clip
Battery compartment

Visit us at:
www.mightybright.com
CUSTOMER SERVICE:
For questions and assistance please contact us at:
800.922.3233 • [email protected]
REV200