CLD CLDWL01 User manual

SKU# CLDWL01 / CLDWL02 / CLDWL03 / CLDWL04 CLDLED.COM
1
WHAT’S INCLUDED:
1 X LED Work Light
1 X U Mount Bracket
Mounting Hardware
4.3" SQUARE / ROUND
WORK LIGHT
CLDWL01
CLDWL02
CLDWL03
CLDWL04
FEATURES & SPECIFICATIONS:
Light Output: 1,100 Lumens (Per Light)
Power: 27W @ 13.6V DC
Current: 2.0A @ 13.6V DC
Voltage: 10 - 36V DC
Beam Patterns:
Square Flood Beam (CLDWL01)
Round Flood Beam (CLDWL02)
Square Spot Beam (CLDWL03)
Round Spot Beam (CLDWL04)
MOUNTING BRACKET INSTALL INSTRUCTION

SKU# CLDWL01 / CLDWL02 / CLDWL03 / CLDWL04 CLDLED.COM
2
HARNESS INSTALL INSTRUCTION
Wiring Harness sold separately
1. Determine and suitable mounting locations to install the LED work lights, wiring harness and switch.
Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at
connections is required.
2. Connect positive wire and negative wire properly. Press the switch to test if the lights are
functioning properly.
3. Adjust the light to the desired angle and then secure by tightening all mounting screws.