Cleveland CBST620-42 User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
COMBI OVEN-STEAMER
Options & Accessories
SECT. IIB PAGE 18
0108
Stacking Stand for one Cleveland 6.20 Combi
and one Convection ven
Cleveland Standard Features:
I
IStand frame constructed of 1 1/2" thick wall, square tubing
I
ISolid top for directing heat away from Combi
I
ICrossbar supported on three sides
I
ICorner gussets for additional rigidity
I
I16 gauge stainless steel table top
I
IFour, one (1) inch high locator pins for mounting 6.20 combi on
stand
I
IStand restraining device (CBST620-42CA only)
I
IFour level adjustable flanged feet (CBST620-42 only)
I
IFour heavy duty 3" diameter swivel casters,
two with brakes (CBST620-42CA only)
I
IService friendly and easy to clean
I
IUL Sanitation approved, according to NSF2 standards
Notes:
ËThe stands are designed to accommodate full or half size gas or
electric Convection Ovens
ËThe stands are built to su ort all Cleveland 6.20 Combi models
ËThe Convection Oven must always be installed on the bottom
M DEL:CBST620-42 (PN 112433) (with legs)
CBST620-42CA (PN 112421) (with casters)
ITEM NUMBER __________________________________________
OB NAME / NUMBER __________________________________
Short Form Specifications
S all be Cleveland Model: CBST620-42___ Stacking Stand for one Cleveland
6.20 Combi and one full or alf size Convection Oven. Stand frame
constructed of 1 1/2" t ick wall, square tubing. Crossbar supported on t ree
sides. 16 gauge stainless steel table top. Four, one (1) inc ig locator pins
for mounting 6.20 combi on stand. Stand restraining device (for CBST620-
42CA only). Four level adjustable flanged feet (CBST620-42) or four eavy
duty 3" diameter swivel casters, two wit brakes (CBST6220-42CA).

N TES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. SECT. IIB PAGE 19
0108
45.00”
42.00”
6.50”
42.00”
6.50”
47.92” 40.44”
3.18”
38.26”
42.00”
77.50”
50.00”
45.00”
50.00”
The Convection ven manufacturer and installers are responsible
for proper venting and if needed installing a flue diverter for the
Convection ven (not supplied by Cleveland Range).
CST-620 (with feet) CST-620 (with casters)