Clifford 3706X User manual

OWNER’S GUIDE
MODEL
3706X
©2014 Directed, All rights reserved.
The company behind Clifford®Auto Security
Systems is Directed.
Since its inception, Directed has had one purpose, to
provide consumers with the finest vehicle security and
accessories available. The recipient of nearly 100 pat-
ents and Innovations Awards in the field of advanced
electronic technology.
Quality Directed products are sold and serviced
throughout North America and around the world.
Call [phone] for more information about our
products and services.
Directed is committed to delivering world class
quality products and services that excite and
delight our customers.
THE SCIENCE OF SECURITY™
G3706X 2014 02
Vista, CA 92081
www.clifford.com

Congratulations
Congratulations on the purchase of your state-of-the-art security system.
Reading this Owner’s Guide prior to using your system will help maxi-
mize the use of your system and its many features. For any additional
questions please contact your authorized Directed dealer or contact
Directed at 1-800-753-0600 (US only).
Important information
Government Regulations and Safety information
Read the Government Regulations and Additional Informa-
tion sections of this manual prior to operating this system.
Warning! Failure to heed this information can result in
death, personal injury or property damage and may also
result in the illegal use of the system beyond its intended
purpose.
Your Warranty
Your system comes with a warranty. The warranty terms are detailed at
the end of this guide. Make sure that you receive the proof of purchase
from your dealer, indicating the product was installed by an autho-
rized Directed dealer.
Replacement remote controls
Please see your authorized dealer or visit us at www.directedstore.
com to order additional remote controls. Remote control part numbers
are found on the back of the device.

Contents
Getting Started.................................................................................................... 4
Charging the remote control:................................................................. 4
Keys to using this manual...................................................................... 5
Responder LC Remote Control .............................................................................. 6
Control Center .................................................................................................... 7
Status Screen Icons.............................................................................................. 8
Using your System............................................................................................. 11
Commands and Confirmations ............................................................ 11
Performing Commands ....................................................................... 11
Responder LC Command table ............................................................ 12
Fault Condition Alerts......................................................................... 12
Basic Commands (Direct Access) ........................................................................ 13
Arm ................................................................................................. 13
Disarm ............................................................................................. 13
AUX/Trunk........................................................................................ 14
Remote Start/Aux 1/Aux 4................................................................. 14
Advanced Commands: (Level 1) ......................................................................... 15
Silent Arm......................................................................................... 15
AUX 1.............................................................................................. 15
Advanced Commands: (Level 2) ......................................................................... 16
Sensor Bypass ................................................................................... 16
Remote Valet .................................................................................... 16
AUX 2.............................................................................................. 16
Advanced Commands: (Level 3) ......................................................................... 17
Sensor Silent Arm .............................................................................. 17
AUX 3.............................................................................................. 17
Alarm Report..................................................................................... 17
Advanced Commands: (Level 4) ......................................................................... 18
Full Silent Arm ................................................................................... 18
AUX 4.............................................................................................. 18
Responder LC Configuration............................................................................... 19
Navigating menus and options............................................................ 19
Button operation ................................................................................ 19
Access menu items ............................................................................ 19
Main Menu....................................................................................................... 20
Setup Remote menu:........................................................................... 20
Remote Start Info ............................................................................... 21
Runtime Alert..................................................................................... 22
Car 2............................................................................................... 22
Screen Color..................................................................................... 22
Temp Unit ......................................................................................... 22
Button Beep....................................................................................... 23

System Type ...................................................................................... 23
Clock Set .......................................................................................... 23
Review ............................................................................................. 23
Exit .................................................................................................. 23
Sensor Adjust: ................................................................................... 23
Pair Remote:...................................................................................... 24
Demo mode: ..................................................................................... 25
Power Off:........................................................................................ 25
Exit: ................................................................................................. 25
Alarm Features ................................................................................................. 26
Normal Arm Protection....................................................................... 26
Sensor Silent Arm protection ............................................................... 26
Full Silent Arm Protection .................................................................... 27
Sensor Warn-away Messages ............................................................. 27
Full Trigger Messages......................................................................... 27
Emergency Override .......................................................................... 27
Trigger Zone Fault Report.................................................................... 28
Alarm Report when disarming ............................................................. 28
Alarm Report when requested ............................................................. 29
Nuisance Prevention (NPC)................................................................. 29
Remote and System Operations.......................................................................... 30
Passive Arming.................................................................................. 30
Auto Re-arming.................................................................................. 30
Valet Mode ....................................................................................... 31
Power Save....................................................................................... 31
Rapid Resume ................................................................................... 31
Automatic Remote Updates ................................................................. 31
Out of Range .................................................................................... 32
No Remote Output............................................................................. 32
Feature not Available ......................................................................... 32
Vehicle Recovery System (VRS) ............................................................ 32
1-way Companion Remote Control..................................................................... 34
Accessing Commands ........................................................................ 34
1-way Remote Control Configuration.................................................................. 35
Remote Features ................................................................................ 35
Feature Descriptions........................................................................... 36
Remote Pairing .................................................................................. 37
System Expansion Options................................................................................. 39
Battery Information (Responder LC)..................................................................... 41

Low Battery....................................................................................... 41
Battery Life........................................................................................ 42
Battery Information (1-Way) ................................................................ 43
Battery Disposal ................................................................................ 43
Glossary of Terms.............................................................................................. 44
Patent Information ............................................................................................. 45
Government Regulations .................................................................................... 46
Additional Information....................................................................................... 48
Installation ........................................................................................ 48
Interference....................................................................................... 48
Upgrades and Batteries ...................................................................... 48
Water/Heat Resistance ...................................................................... 48
Limited lifetime consumer warranty ..................................................................... 49

4© 2014 Directed. All rights reserved.
Getting Started
Your Responder LC remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and if not fully charged, use the provided cable to con-
nect to the USB port on a computer. See “Battery Information (Re-
sponder LC)” on page 41 and “Status Screen Icons” on page
8for more information about the battery.
Charging the remote control:
1. Plug the USB end of the provided USB cable into the USB port
on a computer. Insert the mini-USB connector into the mini-USB
port located on the side of the remote control. The text field will
display CHARGE to indicate the remote control is charging
(The remote remains operational while charging and can com-
mand the system).
2. Once fully charged the text field will display FULL .
3. The remote control is then ready for use. Disconnect the cable
from the remote control end first.
Note If the battery is excessively depleted when charging, func-
tionality may be delayed while it charges to the minimum
voltage required to operate the display, after which normal
charging resumes.

5
© 2014 Directed. All rights reserved.
At a Glance
5
Keys to using this manual
Specific actions (in bold type) and style conventions are used consis-
tently throughout this manual, they are as follows:
• Press: implies pushing in and releasing a button.
• Hold: is used after Press actions when a button needs to be held
in position for an extended period of time, typically several sec-
onds.
• ARMED this style denotes the text which appears in the text field
portion of the Display during operations described in the manual.
If the text string is too long for the text field, it then plays and loops
sequentially word by word.
• Italicized words denote section/sub headings in this guide and
can be located through the table of contents.
• An asterisk (*) when used after a word or phrase denotes that
additional details can be found in related sections usually noted
at the bottom of the page or end of the section.

6© 2014 Directed. All rights reserved. 6
Responder LC Remote Control
Feature Description
Display
1
ALL
Status screen - the upper portion of the display contains
status icons for the System, Siren, Alarm zones, and Remote
Control
Text field - the lower portion of display - shows the Clock,
Command confirmations, Page messages and Programming
menus
Command buttons (4)
AUX
Used to perform arming, disarming, and auxiliary channel
commands
Function button Used to access function levels for commands, configuration
menus for programming, and car selection
Micro-USB Port The USB cable plugs into this port (located on remote control
side).

7
© 2014 Directed. All rights reserved.
At a Glance
7
Control Center
Control CenterLED Button
The Control Center, typically located on the upper part of the front
windshield sends and receives commands or messages to and from
your system. It consists of:
• The In-vehicle system antenna, for 2 way communication.
• The Status LED, as a visual indicator of the system’s status.
• The Control button, for placing the system into Valet Mode* and
to perform the Emergency Override** operation.
* See “Remote and System Operations” on page 30 for details.
** See “Alarm Features” on page 26 for details.

8© 2014 Directed. All rights reserved.
Status Screen Icons
1
ALL
Text Field
Status Screen
Icons
The table below describes all the status screen icons.
Icon Description
System Status
Armed: The system is Armed, the alarm is enabled.
Locked: The system is Locked in Valet, the alarm is disabled.
Disarmed: The system is Disarmed, the alarm is disabled.
Unlocked: The system is Unlocked in Valet, the alarm is dis-
abled.
Siren Status
Siren is disabled for sensor triggers; remote is paged for all trig-
gers (Sensor Silent Arm).
+ ALL Siren is disabled for all triggers; remote is paged for all triggers
(Full Silent Arm).
Zone Status
On during Warn-away and Full Trigger message output
On during Trunk Zone Full Trigger output and Aux/Trunk
channel activation
On during Fault Report to indicate the Trunk is open and
bypassed when arming

9
© 2014 Directed. All rights reserved.
At a Glance
9
Icon Description
Zone Status
On during a Sensor Zone Full Trigger output
On during Fault Report to indicate a Sensor is active and
bypassed when arming
On during the Door Zone Full Trigger output
On during Fault Report to indicate a Door is open and
bypassed when arming
On during a Hood Zone Full Trigger output
On during Fault Report to indicate the Hood is open and
bypassed when arming
On when remote is set to command the system programmed
as Car 1*
On when remote is set to command the system programmed
as Car 2*
Remote Control Status
Bars indicate battery level is Full, ¾,½,¼ or Empty
On while the remote control is transmitting a command
On while the remote control is receiving a message
On with Out of Range fault tone to indicate the remote failed to
receive a command confirmation
Pager on: The remote will wake up to listen for messages
Pager off: The remote will not wake up to listen for messages
The remote will Vibrate when messages are received
The remote will emit Beeps and Tones when messages are
received

10 © 2014 Directed. All rights reserved. 10
Icon Description
Text field Displays the Clock, message text and feature menus
On after the Garage Open** message has been received.
On after the Garage Closed** message has been received.
Remote start is active, the engine is running (with optional
remote start module only).
* This icon not present until the Car 2 is turned on in the Setup Re-
mote configuration menu.
** This icon not present until the remote is paired with an optional
garage door opener.

11
© 2014 Directed. All rights reserved.
Commands
11
Using your System
Commands and Confirmations
Commands, Basic or Advanced, are used to activate system features
and are performed by pressing one of the Command buttons. Basic
commands control the most often used features while Advanced com-
mands control more specialized features and request reports.
Confirmations for Basic or Advanced commands are indicated
first by siren chirps and parking light flashes, and then by Text, Icons
and beeps or tones on the remote control. A description of each
feature confirmation is found in the following Basic command and
Advanced command sections.
Performing Commands
Perform Basic commands by pressing one of the command buttons
while in the Direct Access level. Direct access is available while the
text field displays the Clock. Perform Advanced commands by first
accessing one of the Function Levels and then pressing one of the
command buttons while within a level. Function Levels are available
when the text field displays LEVEL 1,2,3 or 4.
Advanced command example: Silent Arm
1. Press the button once to access Function Level 1, the text
field will display LEVEL 1 .
2. Press the button while LEVEL 1 text is still on to perform the
Silent Arm command.
3. The Responder LC remote will display SILENT ARMED in the
text field and update the status screen icons.

12 © 2014 Directed. All rights reserved. 12
Responder LC Command table
Button
Level Direct Access x 1
LEVEL 1
x 2
LEVEL 2
x 3
LEVEL 3
x 4
LEVEL 4
Arm/Lock
(Panic)
Silent Arm Sensor
Bypass
Sensor Silent
Arm
Full Silent
Arm
Disarm/Unlock Silent Disarm Remote Valet Car Finder
Remote Start*/
Aux 1/4**
AUX Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4
Advance Level
Change Car
(3s), Enter
programming
(8s)
Alarm
Report
* Available only with optional remote start module installation.
** This button can command either aux 1 or aux 4 if turned on by
an authorized Directed dealer.
Fault Condition Alerts
If, when performing a command, a condition exists that does not al-
low activation of an Alarm feature*, the NOT AVAILABLE text and a
fault tone plays.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to “Feature not Available” on page
42 for more details.

13
© 2014 Directed. All rights reserved.
Commands
13
Basic Commands (Direct Access)
Arm
Press and release
The alarm arms, doors lock (if connected), and the siren
chirps and parking lights flash once. The ARMED text and beeps play
to confirm and the System Status Icons update. If Valet mode* is On,
the doors lock and the VALET text and tone play. Exit Valet mode to
arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The PANIC text and
siren tones play to confirm. Press the or button to stop
the output.
Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The DISARM text and beeps play to
confirm and the system status icons update. If Valet mode* is On, the
doors unlock and the VALET text and tone play.
More than 2 siren chirps and remote beeps indicate a trigger has oc-
curred. The DISARM text is replaced by the Alarm report.**
1
ALL
6:30

14 © 2014 Directed. All rights reserved. 14
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The TRUNK text and tones play to confirm.
Remote Start/Aux 1/Aux 4
Press and release
Remote Start ***
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn on or off accordingly. The REMOTE START ON
text and tones play, or the REMOTE START OFF text and tones play
to confirm. The icon is displayed in the status screen while
the engine is running.
Aux1/Aux4****
Activates (or if on, deactivates) the aux 1 or aux 4 output. The
programmed text and on tones or off tones play to confirm, (See
System Expansion Options).
* See “Remote and System Operations” on page 30 for details.
** See “Alarm Features” on page 26 for details.
*** Available only with optional Remote Start module installation.
**** This feature must be turned on by an authorized Directed dealer.

15
© 2014 Directed. All rights reserved.
Commands
15
Advanced Commands: (Level 1)
Press and release the button one time first, before
pressing one of the following command buttons.
Silent Arm
Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once. The SILENT ARMED text plays to confirm and the System Status
icons update. Valet mode* or Trigger Zone Fault report** messages
may be received.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The SILENT DISARM text plays to confirm and the System
Status icons update. The Alarm report** may replace the Silent Dis-
arm text.
AUX 1
Press and release AUX
Activates (or if On, deactivates) the Aux 1 output. The PULSED
text and On tones or Off tones play to confirm.
* See “Remote and System Operations” on page 30 for details.
** See “Alarm Features” on page 26 for details.
1
ALL
LEVEL 1

16 © 2014 Directed. All rights reserved. 16
Advanced Commands: (Level 2)
Press and release the button two times first, before
pressing one of the following command buttons.
Sensor Bypass
Press and release
The parking lights flash each time this command is received to in-
dicate the Sensor bypass type. Two flashes indicates sensor Warn-
away zones are bypassed. BYPASS WARN , one beep and one fault
tone play to confirm. 3 flashes indicates sensor Warn-away and
Full Trigger zones are bypassed. BYPASS FULL , one beep and two
fault tone play to confirm. One flash indicates sensor bypass is Off,
BYPASS OFF and one beep play to confirm..
Note System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The VALET text and beeps (one
for On, two for Off) play to confirm and the System Status icons up-
date. See Valet Mode for more details
AUX 2
Press and release AUX
Activates (or if On, deactivates) the Aux 2 output. The PULSED
text and On tones or Off tones play to confirm.
1
ALL
LEVEL 2

17
© 2014 Directed. All rights reserved.
Commands
17
Advanced Commands: (Level 3)
Press and release the button three times first, before
pressing one of the following command buttons.
Sensor Silent Arm*
Press and release
The alarm arms, doors lock, the siren chirps and parking lights flash
three times. The SENSOR SILENT ARM text and beeps play to confirm
and the System and Siren Status icons update.
Car finder
Press and release
The siren emits one long chirp and the parking lights flash for 10
seconds. The CAR FINDER text and beeps play to confirm. The
parking light flashes stop if armed or disarmed while Car Finder is in
progress.
AUX 3
Press and release AUX
Activates (or if On, deactivates) the Aux 3 output. The PULSED
text and On tones or Off tones play to confirm.
Alarm Report*
Press and hold the button
Requests a report of the most recent triggers and temporarily displays
it in the text field. The report clears when the ignition is turned on.
* See “Alarm Features” on page 26 for more details.
1
ALL
LEVEL 3