
If you wish to reset all the user-selectable features to their normal factory presets, you can do so simply by choosing the Reset all featuresselection (column
1, row 7) on theTable of User-Selectable Features. If you do so, all features — except the programmed remote controls and your valet code — will be reset
to the factory settings that are indicated inBOLD type on theTable of User-Selectable Features. To reset all remote controls, use the Clear all remotesfeature
in column 2, row 6. To reset your valet code, use theSet a new secret valet codefeature in column 2, row 7.
Table of User-Selectable Features
Feature Select 1 blank press 2 blank presses 3 blank presses 4 blank presses
1✱ press Add a new remote control
NOTE 1 Chirps: off/on
(1/2chirps) AutoArming: off/on NOTE 5 — Other vehicle‘s remote:
arm/disarm(1 then 2 chirps)
2✱ presses PersonalizedSiren Sounds*
NOTE 2 NOT USEDLock upon AutoArming:off/on NOTE 6 — Other vehicle‘s remote:
trunk release* (2 chirps)
3✱ presses Play Personalized Siren Sounds* :
trigger only/always (1/2chirps) Remote valet mode via
button combo +✱ : off/on AutoArming entry delay: off/on NOTE 6 — Other vehicle‘s remote:
silent arm and disarm (3 chirps)
4✱ presses Siren duration:30 /60/90sec.
(1/2/3 chirps) AutoStart*:both off/bothon/temp
only/battery only (1/2/3/4 chirps) FACT:off/on NOTE 6— Other vehicle‘s remote:
remote engine starting* (4 chirps)
5✱ presses AutoLock: off/on NOT USEDNOT USEDNOTE 6— Other vehicle‘s remote:
timed headlight activation* (5 chirps)
6✱ presses AutoUnLock: off/on Clearall remotes
NOTE 3NOT USEDNOTE 6— Other vehicle‘s remote:
window rolldown/venting* (6 chirps)
7✱ pressesReset all features (except remotes
and valet code) to factory settings Set a new secret valet code
NOTE 4NOT USEDNOTE 6— Other vehicle‘s remote:
remotevalet mode (7 chirps)
*Requiresoptionalwiringoraccessory;askyourCliffordDealerfordetails.
NOTE 1: Press the button of the new remote. You’ll hear one chirp. Press the button again.You’ll hear two
chirps to confirm that the new remote control has been added.
NOTE 2: This feature requires the optional Self-Powered SmartSiren 4. If so equipped, selection of this feature will
causethesystemtosoundafewsecondsofsirensound#1.Presstheblankbuttontoturnonthissoundorthe✱button
to turn it off. It will then sound a few seconds of sound #2. Repeat: blank=ON, ✱ =OFF for each of the six sounds.
NOTE 3: You’ll hear two chirps to indicate all remotes have been cleared from memory. You must now add
new/existing remotes with the “Add new remote control” feature and/or the “Other vehicle‘s remote” feature.
NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code,waitfor thetwo chirps,thenturn offthe
ignition (you’ll hear 3 chirps to confirm program mode exit). You MUSTnow turn the ignition back on and then
re-enter your new code. If the LED flashes on, your new code has been accepted. If the LED does notlight, the two
codes did not match and the system has reverted to your previous code.
NOTE5:Lets you arm/disarmwiththeremote controlof a G4 system onyour other vehicle(s). For instance,to set the✱
button of the othercar’s remote to arm and disarm this system, select column 4, row 1, then press the✱button of the
other car’s remote (you’ll hear one chirp). Immediately press the ✱button again (you will hear a 2-chirp
confirmation). The ✱button of the other vehicle’s remote will now arm/disarm this system.
NOTE 6: The features in this column allow you to control your system with theremote control of a G4 system on your
other vehicle(s). Just select the function you wish, then press the unused button or button combina tion on the other
remote that you want to use to perform that function on this system (you will then hear a the chirps noted). NOTE: You
must first set a button or button combination on the other car’s remote that will arm/disarm the system (column 4, row
1)before these others will be accepted.
Lifetime limited factory warranty terms & conditions
Cliffordvehiclesecuritysystemsandaccessoriesrequireprofessionalinstallation byanAuthorizedCliffordDealer.Unlessthesystemissoldandinstalledbyan
Authorized Clifford Dealer, all product warranties and guarantees are void. As the manufact urer, Clifford Electronics warrants to the original consumer
purchaser,thesystemcontrolunitandremotecontrolstobefreefromdefectsinmaterial andworkmanshipforaslongasyouownthevehicleinwhichthe
systemwasoriginallyinstalled.Allotherpartsofthesystemandaccessoriestothesystemarewarrantedtobefreefromdefectsinmaterialandworkmanshipfor
one (1) year from the date of purchase. Clifford Electronics will repair or replace, at its o ption and free of charge during the warranty period, any system
componentthatprovesdefectiveinmaterialorworkmanshipundernormalinstallation,use,andservice,providedtheproductisreturnedtoourfactorybyan
AuthorizedCliffordDealer,transportationchargesprepaid.Productsreturnedtoourfactorymustbeaccompaniedbyaphotocopyofthepurchasereceipt.In
theabsenceofsuchpurchasereceipt,thewarrantyperiodshallbeone(1)yearfromthedate ofmanufacture.Anydamagetotheproduct(s)asaresultofmisuse,
abuse,neglect,accident,incorrectwiring,improperinstallation,destructionoralte rationoftheserialnumber,repairoralterationoutsideourfactory,orany
use violative of instructions furnished by us will void the warranty. This warranty is limi ted to defective parts and specifically excludes any incidental or
consequentialdamagesconnectedtherewith.Thiswarrantyisnottransferable.CliffordElectronicsmakesnowarrantyagainsttheft.Thiswarrantyisnottobe
construed as an insurance policy against loss. Warranty on installation labor, removal and reinstallation charges are not the responsibility of Clifford
Electronics, Inc.
9