Clihome 6609 User manual

9 1/16"~11 1/32"
230~280MM

12
3
4
56
7
8
9
10
11
12 13
20
18
14
15 16 17
19
NO. Part Name QTY. NO. Part Name QTY.
1Shower arm cup 1 11 Handle 1
2Shower arm 1 12 Tapping screw sleeve 4
3Shower head 1 13 Tapping screw 4
4Shower hose 1 14 Valve gasket spare parts 4
5Holder cup 1 15 Handle screw 1
6Hand shower holder 1 16 Handle cup 1
7Shower hand 1 17 Wrench 1
8Main body 1 18 Silicone nozzle 5
9 Panel 1 19 Instruction manual 1
10 Water divider 1 20 Gloves 2

13.5mm
17/32"
9 1/16"~11 1/32"
230~280MM

Notice:
1.The installation depth of main body should be no less than 2 10/16"(67mm）
and no more than
3 7/64"(79mm） ,including the thickness of tile wall.
Otherwise the panel cannot be installed.
2.The opening size of ceramic tile shall be smaller than the panel size
1. Connect the water pipes as illustrations.
Please make sure the mark"Mixer(UP)" is facing upward.
2. Before tiling, turn on the water and pull the shower handle
to check for leakages
Mixer(UP)
Tile wall
2 10/16"(67mm）min
3 7/64"(79mm）max
If the embedded box is exposed to
the ceramic tile surface,
then it can be cut flush the
embedded box with
the ceramic tile surface
4 23/32"(120MM)
6 22/32"(170MM)

12
3
4
567
8
9
10
11
12 13
14 15
22
20
16
17 18 19
21
NO. Part Name QTY. NO. Part Name QTY.
1Shower arm cup 1 12 Cover 1
2Shower arm 1 13 Bathtub spout body 1
3Shower head 1 14 Tapping screw sleeve 4
4Shower hose 1 15 Tapping screw 4
5Holder cup 1 16
Valve gasket spare parts
4
6Hand shower holder 1 17 Handle screw 1
7Shower hand 1 18 Handle cup 1
8Main body 1 19 Wrench 1
9 Panel 1 20 Silicone nozzle 5
10
Water divider 1 21 Instruction manual 1
11 Handle 1 22 Gloves 2

12
3
4
567
8
9
10
12 13
11 20
14 15
23
21
16
17 18 19
22
NO. Part Name QTY. NO. Part Name QTY.
1Shower arm cup 1 13 Bathtub spout copper 1
2Shower arm 1 14 Tapping screw sleeve 4
3Shower head 1 15 Tapping screw 4
4Shower hose 1 16 Valve gasket spare parts 4
5Holder cup 1 17 Handle screw 1
6Hand shower holder 1 18 Handle cup 1
7Shower hand 1 19 Wrench 1
8Main body 1 20 Bubbler removal tool 1
9 Panel 1 21 Silicone nozzle 5
10 Water divider 1 22 Instruction manual 1
11 Handle 1 23 Gloves 2
12 Cover 1

13.5mm
17/32"
9 1/16"~11 1/32"
230~280MM

1. Connect the water pipes as illustrations.
Please make sure the mark"Mixer(UP)" is facing upward.
2. Before tiling, turn on the water and pull the shower handle
to check for leakages
NPT 1/2"
COLD water
inlet pipe
NPT 1/2"
Mixed water
outlet pipe
NPT 1/2"
Mixed water
outlet pipe
NPT 1/2"
Mixed water
outlet pipe
Mixer(UP)
NPT 1/2"
HOT water
inlet pipe
Tile wall
2 10/16"(67mm）min
3 7/64"(79mm）max
If the embedded box is exposed to
the ceramic tile surface,
then it can be cut flush the
embedded box with
the ceramic tile surface
Notice:
1.The installation depth of main body should be no less than 2 10/16"(67mm）
and no more than
3 7/64"(79mm） ,including the thickness of tile wall.
Otherwise the panel cannot be installed.
2.The opening size of ceramic tile shall be smaller than the panel size
4 23/32"(120MM)
6 22/32"(170MM)

Step1
Step2
Step1.Wrap waterproof tape around the main body thread joint,
Step2.Screw the main body into the thread.
Model:6202
Model:6612
Step1 Step2
Step1.Wrap waterproof tape on the thread, screw into the connector on the wall,
Step2.install the spout on the connector, and tighten the locking screw.

1 2 3
Step1.Attach the decorative cup to the main body,
Step2.Wrap waterproof tape around the main body thread joint,
Step3.Screw the main body into the thread,
Step4.Connect hand shower and the hose.

Website:www.clihome.net
Contact Phone Number:303-747-4421
Service Contact:[email protected]