cliMATE CLI-AP10W Manual

CLI-AP10-W | Installation & Operating Instructions
Air
Purification
System

Congratulations on your purchase of a
Cli~Mate Air Purification System.
This Air Purification System removes indoor air pollutants and odours from the air you breathe,
creating a healthier home environment.
Note: Please read through the instructions carefully before using or installing the product and ensure that the
manual is kept in a safe place for future reference.
The system must be properly installed and located in accordance with the installation instructions before it is used.
During the set up of this product if you have any questions / comments / issues DO NOT RETURN TO STORE.
FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT, FREE CALL 1300 764 325.
Electrical Requirements:
Australia / New Zealand 220-240V 50/60Hz
Due to manufacturing alterations product may
vary slightly from the pictured.
CUSTOMER HOTLINE: [phone]
Register your warranty online at
www.cli-mate.com.au/warranty-and-registration
Aquaport Corporation Pty Ltd
70 Hardys Road Torrensville SA 5031
Telephone: [phone]
Facsimile: 08 8354 0722
Email: [e-mail]
Web: www.cli-mate.com.au
Social: /climatebrand @climatebrand

INSTALLATION AND OPERATING INSTRUCTIONS 1
SAFETY PRECAUTIONS
Read all instructions carefully.
• All components need to be installed in accordance with the
user manual instructions for correct performance of unit.
• This appliance should be used in conjunction with a
safety switch.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Keep the air outlet free from air blocking materials such
as clothing, plastic bags or papers.
• Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged in
any manner.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Children should be supervised to ensure that they do not
playwith the appliance.
• Do not use appliance for other than intended use.
• Ensure appliance is on a flat, even surface.
• Do not remove lid whilst unit is operating.
• To protect against fire, electric shock and personal injur y, do not
immerse cord, plugs, or appliance in water or other liquid.
• Unplug from outlet when not in use and before cleaning.
• Do not use outdoors.
• Do not place on or near a hot gas, electric burner, heating
appliance or in a heated oven.
• Place unit in a flat well-ventilated location at least 30cm from
wall or other Appliances.
• Do not immerse base in water or try to disassemble.
• Check voltage to be sure that the voltage indicated on the
nameplate agrees with your voltage.
• Do not wash or reuse the filter.
PRODUCT SPECIFICATIONS
Air Purification Specifications
System Specifications Air Purification System
Model CLI-AP10W
Product Dimensions L 200 x W 200 x H 180 mm
Net Weight 0.8 kgs
Coverage Area up to 10m2
Replacement Filter CLI-AP10-RF

2INSTALLATION AND OPERATING INSTRUCTIONS
OPERATION INSTRUCTIONS
1. Locate a flat stable location with close access to a power
point. Make sure there is at least 30 cm between unit and wall
or other appliances.
2. Connect one end of the USB cable into the AC adapter and
the other end of the USB cable into the USB port at the back
of the unit. The unit can also be powered by plugging it into a
computer USB port.
3. Plug power adapter into appropriate electrical outlet.
4. Press power switch to turn on. The LED light will illuminate,
the fan will start running and the unit will star t purifying the air.
5. Press power switch again to turn off LED light and again to
switch the unit off.
AROMA: To add fragrance, turn off unit and lift off the lid. Remove
aroma cup and add 2-3 drops of aroma oil onto the sponge. (Fig 1)
Warning: It is recommended that asthma sufferers or those
sensitive to fragrances should avoid adding aroma oils to the water
as it may act as an irritant. Some fragrances may cause allergic
responses in some people.
CHANGE FILTER: The filters used in this Cli~Mate air purifier are not
designed to be cleaned, washed, or otherwise reused.
The lifespan and duration of the filter depends on the quality,
surrounding environment and how often it is used. Regularly check
the filter. If heavily soiled it should be replaced.
To replace the filter, turn off unit and disconnect the power. Lift off
lid, remove old HEPA filter, discard and replace with new filter.
Cli~Mate Replacement Filter Product Code: CLI-AP10-RF.
IMPORTANT: Unplug unit from outlet before adding fragrance or
changing the filter.
During the set up of this product if you have any
questions / comments / issues DO NOT RETURN TO STORE
FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE
CALL 1300 764 325.
CLEANING AND MAINTENANCE
Before carrying out any maintenance or cleaning of the unit, make
sure that the power to the unit is turned off and the power cord is
removed from the unit and power socket.
External cleaning of the unit:
• Do not clean unit with any abrasive cleaning agents or solvents.
• Do not apply any water directly to the unit of cleaning.
• Only use a soft clean cloth for all cleaning purposes.
Fig 1

INSTALLATION AND OPERATING INSTRUCTIONS 3
COMPONENT IDENTIFICATION AND CHECK LIST

4INSTALLATION AND OPERATING INSTRUCTIONS
TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem Possible Causes What To Do
No power 1. Unit is not plugged into wall socket. 1. Check connection to wall socket and USB ports.
Loud fan motor 1. Clogged Filter 1. Change Filter.
Unit overheating
1. Air ventilation around unit
not sufficient.
2. Air inlet or air outlet is being
obstructed or blocked by
foreign objects.
3. Internal malfunction.
1. There must be at least 30cm between unit and wall
or other appliances.
2. Ensure there are no object obstructing the air inlet or
air outlet.
3. Return unit to ser vice agent. Call customer care.

INSTALLATION AND OPERATING INSTRUCTIONS 5
Your Aquaport 12 Month Repair or Replacement Warranty
Aquaport warrants this appliance to the first purchaser and subject
to the stated conditions:
Warranty covers any defects in material or workmanship in the
manufactured product within the first twelve months from the date
of purchase.
To make a warranty claim you must call Aquaport on toll free
number 1300 764 325 for instructions. If a product is found to be
faulty there is a 90 day return policy from the date of purchase.
For warranty claims outside of 90 days from date of purchase, product
will be repaired or replaced at our discretion. Repair or replacement
costs of the product will be covered under warranty by Aquaport.
Goods presented for repair may be replaced by refurbished goods
of the same type rather than being repaired. Refurbished parts
may be used to repair the goods.
Warranty does not cover filter cartridge which is a consumable
unless proven to have defects in material or workmanship in the
manufactured product.
The benefits given to you by this warranty are in additions to other
rights or remedies of the consumer law in relation to the goods or
services to which this warranty relates.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if
goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Conditions of this Warranty:
1. This product has been fully installed in accordance
with the user manual installation instructions.
2. The warranty extends only to repairing or replacing
any component that proves to be defective in material
or workmanship.
3. The warranty does not cover defects occasioned by
misuse, alterations, accidents, or used for other than the
intended purpose.
4. The warranty does not cover damage to the product
caused by accident, fire, or floods.
5. Proof of purchase is required for warranty claims.
Please keep purchase receipt in a safe place.
To enable us to register your warranty and provide service should a
problem occur, we recommend you register your warranty online at:
www.cli-mate.com.au/warranty-and-registration
Aquaport Corporation Pty Ltd
70 Hardys Road, Torrensville SA 5031
Customer Care 1300 764 325

CUSTOMER HOTLINE: [phone]
Aquaport Corporation Pty Ltd
70 Hardys Road Torrensville SA 5031
Telephone: [phone]
Facsimile: 08 8354 0722
Email: [e-mail]
Web: www.cli-mate.com.au
Social: /climatebrand @climatebrand