Club Car Tempo Walk User manual

To find your local authorized Club Car dealer,
visit www.clubcardealer.com, or call 1-800-ClubCar (258–2227)
OWNERSMANUAL

1
NOTICE
This manual is valid for units manufactured in the build code range provided on the back cover of this
manual. If the unit build code is different from that shown on the back cover of this manual, please contact
your nearest dealer or go to www.clubcar.com to retrieve the proper owner's manual for the unit. See also
Model Identification in this manual.
Warranty information appears at the end of this manual. No other warranties, expressed or implied, are
contained herein. Your authorized representative checked the unit before it was delivered to you and will
provide you a copy of the completed unit warranty registration form.
Club Car is not liable for errors in this manual or for incidental or consequential damages that result from
the use of the material in this manual.
This manual contains proprietary information that is protected by copyright. All rights are reserved. No
part of this manual may be photocopied, reproduced, or translated to another language without the written
consent of Club Car, LLC.
The information contained in this document is subject to change without notice.
Club Car reserves the right to make design changes to units without obligation to make these changes on
units previously sold.
If in English, this manual is the Original Instructions provided by the manufacturer. If in any language
other than English, this manual is a translation of the Original Instructions.
P.O. Box 204658 Augusta, Georgia 30917–4658 USA Telephone [phone] Service Parts Fax
706–855–7413 www.clubcar.com
Copyright © 2018, Club Car, LLC Club Car, Tempo Walk is a registered trademark of Club Car, LLC.
FOREWORD
Thank you for choosing Club Car, the name most widely recognized as the industry leader in unit
efficiency and long-lasting value. You have chosen the finest walking cart on the market. Please protect
your investment and ensure that your Tempo Walk provides years of reliable, superior performance by
reading and following the maintenance instructions in this manual.
Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating
instructions and safety precautions in this manual. These instructions must be followed in order to avoid
the risk of severe personal injury. If you rent or loan your unit to others, we recommend that you ask them
to read this manual before they operate Tempo Walk.
Club Car products are backed by a customer support system designed to offer you fast, courteous
service. In the event that your cart needs repairs or service, please contact your local authorized Club Car
dealer or distributor, who will be able to provide technical advice, perform warranty work, and sell parts
and service manuals.
To find your local authorized Club Car dealer, visit www.clubcardealer.com, or call 1-800-ClubCar
(258–2227).
If you would prefer to write to us, direct your letter to: Club Car LLC, Attention: Marketing Services,
P.O. Box 204658, Augusta, Georgia 30917-4658 USA.
We hope you will consider this owner’s manual a permanent part of your cart.

2
TABLE OF CONTENTS
TECHNICAL PUBLICATION CUSTOMER SATISFACTION ONLINE SURVEY 3
TEMPO WALK OVERVIEW 3
MAINTENANCE ITEMS 3
SAFETY DECAL AND FEATURE IDENTIFICATION 4
PRACTICE SAFETY 5
SAFETY DETAILS 5
GENERAL WARNINGS 6
PROPOSITION 65 –STATE OF CALIFORNIA 7
RECYCLING LITHIUM ION PHOSPHATE BATTERIES 7
GENERAL INFORMATION 8
MODEL IDENTIFICATION 8
SAFETY COMMITTEE 8
CONTROLS AND INDICATORS 9
PRE-OPERATION AND DAILY SAFETY CHECKLIST 10
PERFORMANCE INSPECTION 10
STARTING AND OPERATING TEMPO WALK 11
STOPPING TEMPO WALK 12
TEMPO WALK TRANSMITTER 13
REPLACING A TOGGLE SWITCH 14
CHANGING CHANNELS ON TEMPO WALK 14
CALIBRATING A TEMPO WALK 16
TEMPO WALK TABLET 17
TOWING 20
LONG TERM STORAGE 20
MAINTENANCE 21
PERIODIC SERVICE SCHEDULES 22
PERIODIC LUBRICATION SCHEDULES 23
BATTERY 24
BATTERY CHARGER 29
CHARGING PROCEDURES 33
CHARGING BATTERY 33
CLEANING THE UNIT 35
ACCESSORIES 35
SUBSEQUENT OWNER REGISTRATION 35
TEMPO WALK SPECIFICATIONS 36
TEMPO WALK LIMITED WARRANTY: 39
MOST FREQUENT WARRANTY WORK 42

3
TECHNICAL PUBLICATION CUSTOMER SATISFACTION ONLINE
SURVEY
Let your voice be heard!
Please participate in the Technical Publication customer satisfaction online survey. This survey takes less
than five minutes to complete and your responses will help examine current performance and identify
areas for future improvement.
Our top priority is to provide timely, accurate, and user-friendly manuals.
The online survey can be found at: http://bit.ly/1w9uFMh.
TEMPO WALK OVERVIEW
1
47640674001
Ultrasonic Sensors (3 qty) - Obstacle Detection
2
47640671001
Dual USB Charge Ports - Charging cell phones
3
47642670001
8” Tablet - Front, Center, & Back Yardages
4
47640665001
Dashboard - Power, Run, Neutral, & Battery Meter
5
47642475001
Cooler with Scorecard Clip
6
Included
Cup Holders - Divot Repair Seed and Beverages (not included)
MAINTENANCE ITEMS
⚠WARNING
●Read before attempting any service on the unit.
●Before servicing unit, read complete section(s) and any referenced information that may
be relevant to the service or repair to be performed._

4
MAINTENANCE ITEMS
Motor - Gear Lube
Valvoline Multi Purpose #2 Grade Lithium
Complex
Fuse, 30 Amp
CC P/N 102492301
Front Caster - Grease
Valvoline Multi Purpose #2 Grade Lithium
Complex
Dashboard - Silicone
GE Clear 100% Waterproof Silicone 2+*
Rear Tires: Max PSI 14
Kenda “Turf Rider” 13x6.5x6 Tubeless 2 ply
Front Tire: Max. PSI 22
Kenda “Turf Rider” 11x4.0x4 Tubeless 2 ply
Figure 1 Maintenance Items
SAFETY DECAL AND FEATURE IDENTIFICATION
The following pages contain safety decal and feature identification information. For detailed information
on specific features, read the appropriate section in this manual.
TEMPO WALK
1
47642670001
Operating Instructions on tablet start screen
2
47634800001
Decal, Warning- Do not ride on Tempo Walk
3
47664051001
Decal, Caution - Tempo Walk moves by remote control
4
47640665001
Dashboard, Battery Power Meter - Shows battery level
Dashboard, Power Button - powers on and off the Tempo Walk
Dashboard, Run/Neutral Button - changes operation mode

5
PRACTICE SAFETY
Figure 2 Practice Safety
Safety signs like you see above may at first seem shocking, but their impact is mild compared with the
reality of severe personal injury.
Your safety and satisfaction are of the utmost importance to us. That is why before operating Tempo Walk,
we urge you to review the information in this manual. Understand and become familiar with the DANGER,
WARNING, and CAUTION statements and procedures it contains, along with the safety decals that are
affixed to your unit.
Take time to understand the language of safety. It is a language that can save your life.
SAFETY DETAILS
⚠WARNING
●This owner’s manual should be read completely before attempting to use or service the unit.
Failure to follow the instructions in this manual could result in property damage, severe
personal injury, or death.
It is important to note that some vital statements throughout this manual and on the decals affixed to the
unit are preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend
that you take special notice of these safety precautions. Safety precautions are essential and must be
followed.
Throughout this manual and on the operation and safety decals affixed to the unit, the words “cart” and
“unit” are used interchangeably.
If any of the operation or safety decals on the unit become damaged, have been removed or cannot be
easily read, they should be replaced immediately to avoid possible property damage, personal injury, or
death. Contact your distributor/dealer.
⚠DANGER
●A DANGER indicates an immediate hazard that will result in severe personal injury or
death.
⚠WARNING
●A WARNING indicates an immediate hazard that could result in severe personal injury or
death.

6
CAUTION
●A CAUTION symbol indicates a hazard or unsafe practice that could result in personal
injury.
GENERAL WARNINGS
The following safety statements must be heeded whenever the unit is being operated, repaired, or
serviced. Unit feature identification information is also included. See Safety Decal and Feature
Identification on page 5. Other specific safety statements appear throughout this manual and on the unit.
⚠DANGER
●Battery –Explosive gases! Do not smoke. Keep sparks and flames away from the unit and
service area. Ventilate when charging or operating unit in an enclosed area.
●The unit will not provide protection from lightning, flying objects, or other storm-related
hazards. If caught in a storm while using Tempo Walk, turn off and remove the transmitter
from your person, turn off the power to the unit, and seek shelter in accordance with
applicable safety guidelines for your location.
⚠WARNING
●Follow the procedures exactly as stated in this manual, and heed all DANGER, WARNING,
and CAUTION statements in this manual as well as those on the unit and battery charger.
●Do not leave children unattended near Tempo Walk.
●Prior to leaving the unit for extended periods, or servicing the unit, turn off the power to
the unit, and disconnect the main power fuse under the cooler. Chock the wheels when
servicing the unit.
●Improper use of the unit or failure to properly maintain it could result in decreased
performance, severe personal injury, or death.
●Any modification or change to Tempo Walk that affects the electrical system, stability or
tracking of the cart, or increases maximum speed settings beyond factory specifications,
could result in severe personal injury or death.
●Check the cart for proper location of all unit safety decals and make sure the operating
instructions are in place and are easy to read on the tablet. See Safety Decal and Feature
Identification on page 5.
●Only trained technicians should service or repair the unit or battery charger. Anyone doing
even simple repairs or service should have knowledge and experience in electrical and
mechanical repair. The appropriate instructions must be used when performing
maintenance, service, or accessory installation.
●Wear safety glasses or approved eye protection when servicing the unit or battery
charger.
●Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when servicing
the unit or battery charger.
●Use insulated tools when working near batteries or electrical connections. Use extreme
caution to avoid shorting of components or wiring.

7
PROPOSITION 65 –STATE OF CALIFORNIA
⚠WARNING
●This product can expose you to chemicals including Nickel and Carbon which are known
to the state of California to cause cancer and birth defects or other reproductive harm. For
more information, go to www.P65Warnings.ca.gov.
RECYCLING LITHIUM ION PHOSPHATE BATTERIES
⚠WARNING
●Lithium Ion Phosphate batteries contain lithium, carbon, and other metals, acids and
compounds. If improperly handled, they can contaminate both water and soil, causing
environmental damage and personal injury.
Lithium Ion batteries should be properly recycled (Figure 3). They cannot be disposed as municipal waste
and must be collected separately. Responsibility for environmental protection must be shared, not only by
the manufacturers of the batteries, but by people who use the batteries as well. Please contact your
nearest Club Car dealer or distributor for information on how to properly recycle your batteries.
Figure 3 Dispose of Lithium Ion Batteries Properly
INTERNATIONAL SAFETY SYMBOLS ON BATTERIES Anyone using, repairing, or servicing the unit
must understand and heed the safety symbols on the unit battery or batteries.
Figure 4 International Safety Symbols on Batteries

8
GENERAL INFORMATION
We urge the Tempo Walk owner/operator to read and understand this manual, and to pay special
attention to the safety issues specific to this cart.
MODEL IDENTIFICATION
The serial number of each cart is printed on a metal emblem located on the frame under the cooler
(Figure 5). This serial number is an alphanumeric code (Example: to AV1906-001300) (Figure 6).
Figure 5 Serial Number Location (under cooler)
Figure 6 Serial Number Plate
SAFETY COMMITTEE
If the Tempo Walk cart is to be rented or is part of a fleet, we strongly recommend that a safety committee
be appointed. One of the main concerns of this committee should be the safe operation of the carts. This
should include at a minimum:
●Where carts should be operated, proper safety and directional signage, and installing ramps
where needed
●Ensuring that proper warnings/hazards are displayed and visible on the unit.
●Who should and who should not use the carts.
●Instructing first time users on safe and proper use, and ensuring they watch the tutorial video
●Maintaining carts in a safe condition.
●What to do if a user needs support.
●How various rules are to be enforced.
●The safety committee should include all these items and such others as the committee feels
necessary or appropriate.

9
CONTROLS AND INDICATORS
See General Warnings on page 7.
⚠WARNING
●If renting or loaning the unit, make sure the operator is familiar with all controls and
operating procedures before allowing the cart to be used.
●Do not turn towards the unit when the unit is connected to the transmitter.
●Always bring the cart to a full stop before turning off the transmitter.
●When Tempo Walk is in the neutral position, the unit has no brakes and will not connect to
the transmitter.
●Always put the unit back into the run position to operate with the transmitter.
●The transmitter will immediately stop the unit if its power switch is turned off (see figure 8)
The dashboard is located on the driver side of Tempo Walk, push the power button to turn the unit off and
on, see (Figure 7) you will hear a brief chime when the cart turns on. The unit is in “neutral” when the blue
LED light is lit, and is in the “run” position when the LED light is not lit.
Figure 7 Dashboard (On/Off/Neutral)
Figure 8 Transmitter Toggle Switch
(On/Off)
Battery Low State-of-Charge Warning
●When the LED lights on the dashboard are red, the unit must be recharged.
●When the unit is turned on, if you hear the voice audio, “Low Battery”, the unit should not be used
and must be recharged.
CAUTION
●When the LED lights indicate a low state of charge, the unit should be placed on a charge
as soon as possible.

10
USB Charge Port for Cell Phone Charging
The 5–volt 2.4-amp outlet (Figure 9) provides electricity to power and recharge portable devices. The
USB port is not designed for the transfer of data.
Figure 9 USB Port
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Club Car unit has been thoroughly inspected and adjusted at the factory; however, upon receiving
your new unit(s), you should become familiar with its controls, indicators, and operation. Carefully inspect
each unit to ensure that it is in proper working condition before accepting delivery.
Use the following checklist as a guide to inspect the unit. This checklist should be used daily to ensure
that the unit is in proper working condition and in conjunction with the Performance Inspection on page
11, and the Periodic Service Schedules on page 19. Any problems should be corrected by a Club Car
distributor/dealer or a trained technician.
Any unit not functioning correctly should be removed from use until it is properly repaired. This
will prevent further damage to the unit and avoid the possibility of injury due to unsafe conditions.
●General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and
screws are tight.
●Safety and information decals: Check to ensure that all safety and information decals are in
place. See Safety Decal and Feature Identification on page 5.
●Tires: Visually inspect tires for wear, damage, and proper inflation on a daily basis. See unit
Tempo Walk Specifications on page 32.
●Charger cord, plug, and receptacle: Visually inspect for cracks, loose connections, and frayed
wiring. See Plug and Receptacle on page 27.
PERFORMANCE INSPECTION
After you have familiarized yourself with the Tempo Walk’s controls, have read and understood the
operating instructions, and have watched the tutorial video, then take the unit out for a test walk.
Use the following checklist in conjunction with the Daily Pre-Operation and Safety Checklist as a guide to
inspect the unit and check daily for proper operation. Any problems should be corrected by a Club Car
distributor/dealer or a trained technician.
●Brakes: Be sure to check that both rear motor brakes function properly. When the unit is turned
off, the brakes should hold Tempo Walk firmly in place on both sides of the unit. If the unit is
powered on, and is in the “Run” position, both brakes should also hold the unit firmly in place. If
the unit is placed in the “neutral” position, it should roll freely by hand. If the unit fails to exhibit
these conditions have the motor brakes checked and adjusted as required.

11
●Tracking: The unit should be tracking centered on the transmitter and should have only minor
play due to terrain and golfer movement. The unit should follow approximately 4 feet behind the
transmitter.
●General: Listen for any unusual noises such as squeaks or rattles. Check the unit’s performance.
Have a Club Car distributor/dealer or a trained technician investigate anything unusual.
○Note: Front Caster may oscillate slightly when being moved without a golf bag and clubs
●Acceleration: when the unit is connected to the transmitter, it should smoothly pick up speed as
the golfer accelerates their walking pace. It should slow down when the golfer slows their pace.
●Walk Away: The unit will apply brakes, when the transmitter gets more than 12’ away from the
unit.
●Turning: When connected to the transmitter, the unit should turn, following the direction of the
golfer. Should the golfer rotate their body too far when making sharp turns, the unit may shut itself
off.
●Should objects interfere with the front sensors, the unit brakes will be immediately deployed, and
a voice audio will inform the user that the front sensors have been activated.
⚠WARNING
Once the front sensors are tripped, the unit will put the sensors on hold for 30 seconds to give the
user time to free themselves from their situation, then the front sensors will be reset.
⚠WARNING
●Slopes: Always walk the unit directly up and down the “Fall” line of slopes. Do not operate
along steep side hills. Do not operate unit on slopes exceeding 10% grades.
STARTING AND OPERATING TEMPO WALK
1. Study and understand all controls.
2. Read safety and information decals located on the unit and view the tutorial video
3. Securely fasten clubs in Tempo Walk.
4. Make sure front wheel is turned in desired direction.
5. Turn the unit ON by pressing the power switch on the dashboard and make sure nothing is
in your path. Make sure the unit is not in the neutral position.
6. Make sure transmitter switch is “OFF”, then attach transmitter securely and vertically on
your waistband at the center of your back. Never use the transmitter in any other position.
7. When ready to activate Tempo Walk make sure you are in a safe operating environment.
Once the transmitter is directly facing the unit, turn the transmitter switch to the “ON”
position, which will be in the up position on the toggle switch. Standing centered and
directly in front of the unit approximately 2-3 feet, SLOWLY begin to walk away from the
unit until you hear a “beep” indicating that you are now connected to Tempo Walk. Tempo
Walk is now following you, and it will maintain an operating distance of 2 to 6 feet.
⚠WARNING
●The Operator is taking full responsibility and control of all movement of the Tempo Walk.
●Make safety your top priority
●Keep the transmitter facing the Tempo Walk unit at all times.
●Walk in the center of cart paths and bridges
●When 2 or more Tempo walk units are operating, walk in single file on cart paths
●Keep front sensors clear of obstacles (i.e. towels, head covers, etc.)

12
●The unit will stop following you when the transmitter is turned off
●Bring unit to a complete stop before turning off the transmitter
●Turn off transmitter when approaching greens and tee boxes
●Take wide turns and leave extra room when navigating obstacles. Always maintain a 3-foot
clearance from any objects or obstacles.
●Never let Tempo Walk, follow you into woods, hazards, standing water (> 5 inches), on
greens, or tee boxes.
●Use extra caution operating Tempo Walk near water, on hills, and in confined spaces (i.e.
bridges, walkways).
●To prevent Tempo Walk from following you, you must deactivate Tempo Walk by turning
the transmitter “OFF”, which will mean the transmitter toggle switch will be in the down
position.
●To move Tempo Walk in reverse, ensure Tempo Walk is connected and SLOWLY back
toward it, or turn transmitter off, put unit in neutral and manually roll the unit backwards
as desired.
●Should Tempo Walk fail to respond to transmitter signals. Have a Club Car
distributor/dealer or a trained technician investigate anything unusual.
●Never tilt, flip, tip, lift or attempt to service Tempo Walk
STOPPING TEMPO WALK
⚠WARNING
●Walking through shallow water (< 5 inches) may affect the brakes and the electronics.
After walking through water, check effectiveness of the brakes by turning the transmitter
“OFF” and checking to see that the unit is held firmly in place.
PARKING AND LEAVING THE TEMPO WALK
1. After coming to a complete stop, turn off the transmitter. This disconnects you from Tempo Walk.
2. Turn the unit power off by pressing the power switch on the dashboard.
3. Remove the transmitter from your waist and place it on the unit.
⚠WARNING
●Only licensed drivers should be allowed to operate the unit.
●If renting or loaning the unit, make sure the operator is familiar with all controls and
operating procedures, and has watched the tutorial video, before allowing the unit to be
taken.
●Do not allow a passenger to ride on the unit. This product has a 50 lb. payload capacity
●The unit is not specially equipped for handicapped persons. Be sure all persons can
properly operate the unit prior to allowing them to take the unit.
●For day use only.
●To help avoid being struck, do not stand close to the unit.
●Do not leave children unattended near the unit.
●To help prevent overturning the unit, walk straight (i.e. the fall line) up and down slopes.
Avoid operating the unit on slopes exceeding a 10% grade.
●Avoid sudden starts, sudden stops, and abrupt turns.

13
●To help avoid the possibility of losing control of the unit, reduce speed for adverse
conditions such as wet grass or rough terrain.
●Obey all local rules concerning golf cars.
●The unit should be operated in only specified areas by trained users.
●Do not operate while under the influence of alcohol, drugs, or medications.
●Never operate Tempo Walk in dangerous weather conditions.
●This unit is not intended to be used where risk of falling objects exists. If your unit will be
used in such an environment, contact your local dealer.
No one should operate the unit without first being instructed in the proper operation and use of the unit’s
controls. An experienced operator should accompany each first-time user on a test drive before allowing
him/her to operate the unit alone.
TEMPO WALK TRANSMITTER
⚠WARNING
●Submerging the transmitter in water will affect the performance of the internal electronics
of transmitter. After submerging in water, contact your local Club Car distributor/dealer
immediately.
●The transmitter should be charged daily. If the green light on the front of the transmitter is
Flashing, it means the transmitter needs to be charged as soon as possible. If the green
light is solid, the transmitter has sufficient charge level. See (Figure 16) for proper
transmitter charging procedures
●If the transmitter is dropped or takes a significant impact, it may affect the performance of
the transmitter. Should this occur, check the operations by attempting to connect to the
Tempo Walk unit. If the transmitter doesn't perform normally contact your local Club Car
distributor/dealer for a replacement.
●Never operate the Tempo Walk unit with the transmitter in any position other than secured
on your waist at the middle of your back. The transmitter should always provide a clear
signal to Tempo Walk by being pointed at the unit. Attempting to hold the unit in your
hand, placing it in a pocket or putting the transmitter anywhere other than on your waist is
an unsafe practice.
Front of Transmitter
Back of Transmitter
Side of Transmitter

14
REPLACING A TOGGLE SWITCH
The most common maintenance item on the transmitter is a broken toggle switch.
Replacement is easy
1) Make sure the transmitter is turned off.
2) Loosen the nut securing the toggle switch at the side of the transmitter case.
3) Remove the 2 screws on the front lid of the case.
4) Gently remove the transmitter case lid.
5) Gently unplug the white toggle switch connector from the Transmitter board see figure 10.
6) Plug in a new toggle switch to the transmitter board. Make sure the toggle switch is
oriented so that the “On” position will be up when the case lid is reattached.
7) Repeat steps 2-4 in reverse order to close and secure the transmitter case.
Figure 10 Opened Transmitter
CHANGING CHANNELS ON TEMPO WALK
⚠DANGER
●Never have 2 or more Tempo Walk units with the same channel
turned on, in the same proximity (i.e. 500 Yards).
●Never have 2 or more Tempo Walk Transmitters with the same
channel turned on, in the same proximity (i.e. 500 Yards)
⚠WARNING
Make sure all units in the immediate area are turned off as well as all transmitters
Changing the channel of a Tempo Walk unit requires two steps. First you must set the channel on the
Tempo Walk transmitter, and second you must set the channel on the unit itself. These channels must be
the same for the unit to operate properly

15
Setting the channel on the Transmitter
1. Make sure the transmitter is turned off.
2. Loosen the nut securing the toggle switch at the side of the transmitter case.
3. Remove the 2 screws (#1 Phillips) on the front lid of the case.
4. Gently remove the transmitter case lid.
5. Channels are selected using the white rotary dial on the transmitter board (see fig. 10B set
to ch 2)
6. Use a small flat head screwdriver and turn the dial so that the arrow points to the desired
channel
7. Make sure this channel matches the corresponding TW unit channel
8. Repeat steps 2-4 in reverse order to close and secure the transmitter case
Figure 10B Transmitter Board
Setting the channel on the Tempo Walk Unit
1. Power On the unit using the dashboard
2. Press the neutral button steadily until you hear the voice audio “Calibration Mode”, continue to
press the neutral button until you hear the audio “Channel Select Mode”. You are now ready to
reset the channel.
3. At this point the battery meter LED lights will go away and illuminate only one light indicating the
current channel of operations for the unit (see fig 12) (note: Channel zero is set to LED light #10)
4. Push the neutral button until the LED light shows the desired channel ( i.e. LED light #5 would be
set to channel #5)
5. Pause and wait to hear the chime indicating the channel is reset and then the battery meter will
light up fully
It is recommended that you calibrate the unit once you change its channel

16
CALIBRATING A TEMPO WALK
Calibrating the Tempo Walk allows the unit to travel centered on the golfer and at the appropriate
following distance (48”).
1. Always calibrate the unit on a flat and level surface.
2. Place a tape measure extending straight from the front nose of the unit for 48” (see table below).
Make sure the tape is centered on the unit (see table below).
3. Power on the unit and press the neutral button steadily until you hear the voice audio “Calibration
Mode”
4. Quickly move to straddle the measuring tape, with your heels at the 48” mark. Your back should
be facing the unit and you must stand still during calibration process.
5. The transmitter should be turned on and it should be centered on your waist in the middle of your
back.
6. Wait for the unit to successfully complete its calibration, which will be signaled by several quick
chimes. You must wait until these chimes end before you move. It is now ok to turn off the
transmitter.
7. Should you hear repetitive gongs it means the calibration was unsuccessful. Possible reasons for
this are as follows:
a. Transmitter isn’t charged properly (Green light flashing or off)
b. Transmitter isn’t turned on during calibration, or the unit is not turned on.
c. The Channels between Tempo Walk (abbreviated: TW) and transmitter aren’t the same.
d. Make sure no other transmitters or units are ON.
8. Once these conditions are corrected you can repeat steps 1-6 to re-calibrate the unit
9. Test the unit tracking by walking it around to make sure that the Tempo Walk is following
correctly, both following distance (48”) and tracking centered on the transmitter.
Stand 4 ft in front of TW
Stand centered on the TW

17
TEMPO WALK TABLET Samsung Galaxy Tab 8.0 (Verizon)
How to setup the tablet
1) Press the Gear Icon on the “Operating Instructions” Screen
2) Enter password “6456”, then press submit
3) Select the Location Setup tab (on the left side)
4) Press Download a Course button
5) Search and select the desired course name, then press save
6) Select the Exit tab (on the left side)
How to use the tablet
1. On the Operating Instructions Screen select the START button
2. Optional: For courses with multiple courses or 9’s, select the correct course/9 first (highlight in
green)
3. Select the desired amount of holes to play:
a. Front 9, Back 9, 18
4. Begin playing your round.
5. If you do not get within 25 yards of the green, the tablet will not auto advance to the next
hole.
a. If this happens just select the Previous or Next buttons to navigate to the correct hole.
6. When you are finished, press the “end round” button.
How to activate New User training mode
1. Press the Gear Icon on the Operating Instructions Screen
2. Enter password “6456”, then press submit
3. Select the Operating Mode tab (on the left side)
4. Press the Enable “Pro Shop Mode” button
You must press this button again to revert back to “Normal Mode”.
5. Select the Exit tab (on the left side)
How to Remove and Replace the tablet
1. Unclip the front plastic screen protector on sides of tablet
2. Push back the rubber gasket around the tablet case edges.
3. Remove the tablet.
Tip: Be gentle when removing the tablet so that the charge cable doesn’t get damaged.
4. Plug in the micro USB cable using the right orientation into the new tablet.
Tip: You may need to reach from inside the Tempo Walk to plug in the charger cable securely.
5. Slide the tablet into the case, with the charger side first.
6. Make sure that the tablet is charging (top right of screen)
Tip: The battery icon will have a lightning bolt in it or say 100%.
7. Secure the rubber gasket around the tablet case edges.
8. Replace the plastic screen protector. Tip: Start with the top left tab placement.

18
Troubleshooting the Tablet
Yardages are not accurate (Note: It can take up to 30 seconds for tablet to show accurate yardage)
1. Check to see if the GPS location icon is on, it looks like an upside-down teardrop (located on the
top right of the tablet screen).
a. If this is flashing, the tablet is trying to connect to the GPS satellites. Give it a moment.
b. If the icon is missing, you may need to reset the tablet so that it can function correctly
again.
Simply hold the power button down until the reset option pops up. Then press reset.
Black Screen
1. Check to see if the tablet is powered on by pressing the power button on the top left of the tablet.
a. If the screen lights up, swipe your finger up from the bottom of the screen to unlock the
tablet and use it as normal.
b. If this does not work, look to see if the tablet charge cable is still plugged in.
i. Remove the tablet and make sure the cable is snug in the charge port.
ii. Note: You may also want to plug the tablet into a wall outlet and charge it up to
make sure the tablet isn’t broken.
iii. Be careful reattaching the tablet to Tempo Walk, not to damage the charge
cable.
c. If nothing works call you Club Car service technician to get a replacement.
Broken/Waterlogged Tablet Screen (see warnings below)
Remove the tablet from your Tempo Walk and call your Club Car service technician to get a
replacement. You may have to pay the part cost to replace with a new one.
⚠WARNING
Battery Use and Safety
The battery in GALAXY is not intended to be replaced by the consumer. If you believe the battery is
damaged or needs to be replaced call your Club Car service technician.
• Do not let the GALAXY or battery come in contact with liquids.
Liquids can get into the GALAXY’s circuits, leading to corrosion. Even when the GALAXY appears to be
dry and appears to operate normally, the circuitry could slowly corrode and pose a safety hazard. If the
GALAXY and/or battery get wet, have them checked by your service provider or contact Samsung, even if
they appear to be working properly.
• Do not place your battery in or near a heat source.
Excessive heating can damage the GALAXY or the battery and could cause the GALAXY or the battery to
explode. Do not dry a wet or damp battery with an appliance or heat source such as a microwave oven,
hair dryer, iron, or radiator. Avoid leaving your GALAXY in your car in high temperatures.
• Caution: Some applications or prolonged usage may increase device temperature.

19
Prolonged skin contact with a device that is hot to the touch may produce skin discomfort or redness, or
low-temperature burns. If the device feels hot to the touch, discontinue use and close all applications or
turn off the device until it cools. Always ensure that the phone has adequate ventilation and air flow.
Covering the device with bedding, your body, thick clothing or any other materials that significantly affect
air flow may affect the performance of the phone and poses a possible risk of fire or explosion, which
could lead to serious bodily injuries or damage to property.
• Do not dispose of the GALAXY or the battery in a fire.
The GALAXY or the battery may explode when overheated.
• Avoid dropping the GALAXY.
Dropping the GALAXY, especially on a hard surface, can potentially cause damage to the GALAXY. If
you suspect damage to the GALAXY or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
Important! Use only Samsung-approved batteries and recharge your battery only with Samsung-
approved chargers which are specifically designed for your GALAXY.
Use of a non-Samsung-approved battery or charger may present a risk of fire, explosion, leakage, or
other hazard. Samsung's warranty does not cover damage to the GALAXY caused by non-Samsung-
approved batteries and/or chargers.
• Do not use incompatible batteries and chargers. Some websites and second-hand dealers not
associated with reputable manufacturers and carriers, might be selling incompatible or even counterfeit
batteries and chargers. Consumers should purchase manufacturer or carrier-recommended products and
accessories. If unsure about whether a replacement battery or charger is compatible, contact the
manufacturer of the battery or charger.
• Misuse or use of incompatible batteries and charging devices could result in damage to the equipment
and a possible risk of fire, explosion, or leakage, leading to serious injuries, damages to your phone, or
other serious hazard.
Display/Touch-Screen
Please note the following information when using your mobile device:
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or acrylic and could break if your mobile device is
dropped or if it receives significant impact. Do not use if screen is broken or cracked as this could cause
injury to you.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN MOBILE DEVICE
If your mobile device has a touch-screen display, please note that a touch-screen responds best to a light
touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when
pressing on the touch-screen may damage the tempered glass surface and void the warranty. For more
information, please refer to the “Standard Limited Warranty”.
When your Device is Wet
Do not turn on your device if it is wet. If your device is already on, turn it off and remove the battery
immediately, if applicable (if the device will not turn off or you cannot remove the battery, leave it as-is).
Then, dry the device with a towel and take it to a service center.