CMD 133434 User manual

Installation Guide
Air Monitor Arm
Description
Air is a at screen monitor arm featuring innovative engineering
and contemporary styling. It offers all the benets you would
expect of an adjustable gas lift arm with an extensive range of
useful features.
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T: [phone] | F: [phone] | E: [email protected] | W: www.cmd-ltd.com
Cleaning Storage & Maintenance
Routine Servicing Occasionally rotate and move arm
Service Components Available to order
Cleaning & Maintenance
Damp cloth, no abrasives or
solvents to be used on the
cosmetic surfaces.
Handling & Storage Do not drop or expose to moisture
Warning
Ensure desk surface / partition / is suitable to take the weight of
the arm
Do not use this product for any purpose other than the one it
was designed for
Hold monitor tightly when making any adjustments
Care should be taken to avoid trapping ngers
Do not attach monitor before assembling the arm
Do not dismantle or remodel the arms
Maximum weight supported by monitor arm is 8kg
Minimum weight supported by monitor arm is 2kg
Contents (depending on selection)
x1 Air Arm
x1 Vesa Plate
x2 Allen Keys
x4 Screws
Additional Features
Security Screw
Tighten the security screw to lock the
monitor and prevent removal.
Weight Adjustment
Heavy monitors may require the 4 screws
on back of the head to be tightened
further to strengthen resistance. Max
Weight 8kg. Minimum Weight 2kg.
Limit Rotation
Using an allen key, tighten or loosen the
screw in the base of the mount to lock the
rotation at either 90oor 180o. On the desk
xing options, remove the plastic cover
from the base to access this.
Resistance
To counterbalance the weight of the
monitor use an allen key to either increase
or reduce the resistance.
Fixing Options
x1 C-Clamp
x1 Through Desk
x1 Slatwall Bracket
Part Number: 133434

Installation Guide
Air Monitor Arm
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T: [phone] | F: [phone] | E: [email protected] | W: www.cmd-ltd.com
C-Clamp
Place clamp onto the edge
of the desk and tighten.
Through Desk
Place through desk base on
desk and screw into place.
1
Clip the plastic base as
illustrated above.
Attach the VESA plate to
your monitor using the
x4 screws provided. Max
Weight 8Kg per head.
Minimum weight is 2Kg.
23
Open the lever on the head
of the arm.
Hook VESA onto the head
of the arm and push rmly
down.
5
4
Once in place, close the lever
on the head to x the monitor
in place.
Hold the arm horizontally to adjust the resistance of the
gas strut to counter balance the screen. Turn the allen key
clockwise to increase exibility and counter clockwise to
tighten.
6 8
Once the arm is in place, clip on
the cable management clips
Choose a Fixing Kit
7
Slatwall
Attach the slatwall xing
kit to the slatwall using an
allen key.
Part Number: 133434