CMD solutions ergo Active User manual

Active™, Electric Sit Stand - Information and Instruction Sheet
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T: 01709 829 511 | F: 01709 378 380 | E: [email protected] | W: www.cmd-ltd.com
Main features
1. Available in white.
2. Designed to support 2x at screen monitors,
≤24”.
3. Supports monitors up to 7kgs.
4. Product size: 720.5*632*692~1142mm.
5. The surface travels from top to the bottom in
approx. 11 seconds.
6. The electric motor life cycle is ≥10,000.
Active™ is our new electric sit stand workstation which has been designed to instantly convert most desks into a sit
stand workspace. The product is quick and easy to assemble and provides a generous working surface that can be
raised and lowered at the touch of a button.
Part Number XXXXXX. Issue 1 Date: 30/03/2017
Dimensions Contents
1x 1x
1x 1x
1x1x
1x 2x
1x 6x 4x 8x1x
700mm
400mm
632mm
629mm~1142mm
720.5mm
Screw A Screw B Screw C
Tool A
Tool B Tool C
Part 6 Part 7Part 5
Part 4Part 2 Part 3Part 1

Active™, Electric Sit Stand - Information and Instruction Sheet
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T: 01709 829 511 | F: 01709 378 380 | E: [email protected] | W: www.cmd-ltd.com
Part Number: TBC Issue 1 Date: 30/03/2017
Cleaning, Storage and Maintenance
Service Components Available to order.
Cleaning &
Maintenance
Dry cloth, no abrasives or solvents to
be used on the product surface.
Handling & Storage Do not drop.
Warning
Do not exceed the recommended maximum weight.
Ensure the desk surface is clear before lowering the sit stand
surface.
Step 1 Step 2 Step 3
Step 4 Step 5 Step 6
Step 7 Step 8
Screw A Tool B
Part 5 Part 6
Part 7
Part 1
Part 2
Part 3
Part 8
Pre-installed
bumpers
Part 3
Screw B
Tool B
Part 4
Tighten
Tool C Screw B
Attach the base Connect the power Raise the column
Check the bumpers Fit the surface Fit the arm
Fit the monitors Adjust the weight (if needed)
Tool A