CNET CNP-101U User manual

Wireless USB Print Server
Web Configuration User’s Manual
Rev.01 (October, 2002)
Made In Taiwan
RECYCLABLE

2
TABLE OF CONTENTS
WEB CONFIGURATION............................................................3
CONFIGURING THE PRINT SERVER....................................4
MANAGEMENT...........................................................................5
SYSTEM STATUS...........................................................................5
PRINTER STATUS..........................................................................6
CONFIGURATION ......................................................................7
SERVER DEVICE............................................................................7
TCP/IP PROTOCOL.......................................................................9
NETBEUI PROTOCOL.................................................................10
APPLETALK PROTOCOL..............................................................11
TOOLS .........................................................................................12
RESET .........................................................................................12
FACTORY RESET .........................................................................13
HELP............................................................................................14
ABOUT........................................................................................14

3
Web Configuration
This manual describes the use of the Web Configuration for
controlling and configuring print servers.
Note: The figures listed in this manual are for your reference; the
actual settings showed may be different on your system because of
different network environment.

4
Configuring the Print Server
Open your web browser and type http://192.168.0.1 in the address
box, and press <Enter>. This set of number is the default IP
address of your print server. Please note that the PC’s IP address
must correspond with the print server’s IP address in the same
segment for the two devices to communicate.
When you entered the default IP address, the main screen of the
print server’s configuration will appear as below. In addition to
the product information, you can access and control the print
server’s configuration through four links on the top of this main
screen: Management,Configuration, Tools, and Help.

5
Management
Click on Management link from the toolsbar of the main screen
to enter the Management Table, and it provides information ofthe
print server’s System Status and Printer Status.
System Status
When you choose and enter the Management link, the first screen
appears is the System Status option. (Otherwise, you can click on
the System Status link in the left column of the Management
screen to return here from the other screens.)This option will
show you the system information as below,providing general
information regarding the print server. Click on the <Refresh>
button below to capture the most updated information.

6
Printer Status
Click on the Printer Status link in the left column of the
Management screen to enter the Printer Status option. This
option will show you the information regarding the printer’s status.
Click on the <Refresh>button below to capture the most updated
information. Once the print server is connected to a printer,the
Printer Status in the table will show [Online].

7
Configuration
Click on Configuration link from the toolsbar of the main screen
to enter the Configuration Table, and it provides the configuration
options that include Server Device, TCP/IP Protocol, NetBEUI
Protocol, and AppleTalkProtocol.
Server Device
When you choose and enter the Configuration link, the first
screen appears is the Server Device option. (Otherwise, you can
click on the Server Device link in the left column of the
Configurationscreen to return here from the other screens.)This
option will show you settings required to configure the print server.
Click the <Save> button to ensure the settings are updated and
saved.
Please note that the default settings of wireless mode are:
♦Connection Mode : Infrastructure
♦ESS-ID : default
♦Wireless Channel : 11
You can change the three settings to fit for your wireless network.

8

9
TCP/IP Protocol
Click on the TCP/IP Protocol link in the left column of the
Configuration screen to enter the TCP/IP Protocol option. This
option will show you settings required to configure the print server.
Click the <Save> button to ensure the settings are updated and
saved.

10
NetBEUI Protocol
Click on the NetBEUI Protocol link in the left column of the
Configurationscreen to enter the NetBEUI Protocol option. This
option will show you settings required to configure the print server.
Click the <Save> button to ensure the settings are updated and
saved.

11
AppleTalk Protocol
Click on the AppleTalk Protocol link in the left column of the
Configuration screen to enter the AppleTalk Protocol option.
This option will show you settings required to configure the print
server. Click the <Save> button to ensure the settings are updated
and saved.

12
Tools
Click on Tools link from the toolsbar of the main screen to enter
the Tools Table, and it provides the control options that include
Reset and Factory Reset.
Reset
When you choose and enter the Tools link, the first screen appears
is the Reset option. (Otherwise, you can click on the Reset link in
the left column of the Tools screen to return here from the other
screen.)Click the <Yes>button to activate the reset procedure.

13
Factory Reset
Click on the Factory Reset link in the left column of the Tools
screen to enter the Factory Reset option. Click the <Yes>button
to resume the factory settings.

14
Help
Click on Help link from the toolsbar of the main screen to enter
the Help Table, and it provides general information about the print
server.
About
When you choose and enter the Help link, the screen appears is the
About option. This option will show you the system information
as below,providing general information regarding the print server.