Coaster 900732 User manual

ITEM :900732
Assembly Instructions
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately
.
2. This product is for home use only and not intended for commercial establishments.
PARTS IDENTIFICATION
NO DESCRIPTION FIGURE Q,TY
A LAMP BODY 1 PC
B BASE 1 PC
C WASHER 2 PCS
D NUT 2 PCS
E LIGHT BULB 2 PCS
PAGE 2 OF 3
COASTERFURNITUER.COM

ITEM :900732
Assembly Instructions
STEP1
As a safety feature, and to reduce the risk of electric shock, this portable lamp includes a
polarized plug (one blade is wider than the other). The plug will fit into a polarized outlet in
a single direction only. If the plug does not fit fully in the outlet, reverse the plug and try
again.
If it still does not fit, contact a qualified electrician. DO NOT use with an extension cord
unless, can be fully inserted. DO NOT alter the plug.
FLOOR LAMP:TYPE A LED BULB 9W
PAGE 3 OF 3
COASTERFURNITUER.COM
TABLE LAMP: TYPE A LED BULB 9W

ITEM :900732
Note : Dimension tolerance ±5%
COASTERFURNITUER.COM