Coaster 920067 User manual

ITEM :920067
Assembly Instructions
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately
.
2. This product is for home use only and not intended for commercial establishments.
PARTS IDENTIFICATION
NO DESCRIPTION FIGURE Q,TY
A BASE 1 PC
B TUBE"A" 2 PCS
C TUBE"B" 1 PC
D LAMP HOLDER 1 PC
E HARP 1 PC
F LAMP HANGER 1 PC
G FINIAL 1 PC
H ACRYLIC 48 PCS
I LIGHT BULB 1 PC
PAGE 2 OF 3
COASTERFURNITUER.COM

ITEM :920067
Assembly Instructions
STEP1 STEP2
STEP3
STEP4
As a safety feature, and to reduce the risk of electric shock, this portable lamp includes a
polarized plug (one blade is wider than the other). The plug will fit into a polarized outlet in
a single direction only. If the plug does not fit fully in the outlet, reverse the plug and try
again.
If it still does not fit, contact a qualified electrician. DO NOT use with an extension cord
unless, can be fully inserted. DO NOT alter the plug.
FLOOR LAMP:TYPE A LED BULB 9W
PAGE 3 OF 3
COASTERFURNITUER.COM
How to clean Acrylic product:
Using a dry soft microfiber cloth, lightly brush off any dust.
For additional care, dampen the cloth with warm water. For deepest cleaning, use an Acrylic cleaner.

ITEM :920067
Note : Dimension tolerance ±5%
COASTERFURNITUER.COM