Coastwood Furniture Frank & McKenzie Bed User manual

BEFORE YOU START:
Please check you have all components -
• Headboard
• End Rails x 2
• Side Rails x 2
• Corner blocks with feet attached x 4
• Centre Rail
• Set of slats
• Pack which includes:
• 32mm Headboard bolts x 4
• 50mm JC Bolts x 8
• Allen Key for JC bolts 6mm
• Screws for holding brackets
together (Pan head screws ¾)
Frank & McKenzie
Bed Instructions
BEFORE YOU START:
Please check you have all components -
• Headboard
• End Rails x 2
• Side Rails x 2
• Corner blocks with feet attached x 4
• Centre Rail
• Set of slats
• Pack which includes:
• 32mm Headboard bolts x 4
• 50mm JC Bolts x 8
• Allen Key for JC bolts 6mm
• Screws for holding brackets
together (Pan head screws ¾)
Frank & McKenzie
Bed Instructions

Lay bed back down onto its feet
and fit the centre rail and slats
Step
4
Fit Headboard using 32mm headboard
bolts and screwing through from the
back of the headboard
Step
5
Screw through hole in brackets
to hold the rails in place
Step
2
Stand bed on its side and fit the
corner blocks in place using the
50mm JC bolts.
Step
3
Fit side and end rails together
Step
1
Your bed is now ready for use.
Thanks for choosing quality
New Zealand made product. Enjoy!
Lay bed back down onto its feet
and fit the centre rail and slats
Step
4
Fit Headboard using 32mm headboard
bolts and screwing through from the
back of the headboard
Step
5
Screw through hole in brackets
to hold the rails in place
Step
2
Stand bed on its side and fit the
corner blocks in place using the
50mm JC bolts.
Step
3
Fit side and end rails together
Step
1
Your bed is now ready for use.
Thanks for choosing quality
New Zealand made product. Enjoy!