Cobra KING F8 User manual

9-12°
8-11°
BACK / HEEL
FRONT / BACK
HIGH / MID-HIGH
LOW-MID / MID
LOW / MID
VERY LOW / LOW
Loft Range
Loft Range
Weight Adjustability
Weight Adjustability
Trajectory
Trajectory
Spin
Spin
COMPARISON
TUNE YOUR FLIGHT.
COBRA’s KING F8 family of drivers feature moveable
weights and MyFly adjustable loft technology, allowing
golfers to easily manage their trajectory, distance
and spin. Find the weight and loft configuration that
delivers your best driving performance.

TUNE YOUR CENTER
OF GRAVITY POSITION.
Your KING®F8 and F8+ Drivers are equipped with an
adjustable Center of Gravity (CG) system featuring a
12g and a 2g moveable weight. Two adjustable weight
settings allow you to dial in your desired launch and
spin characteristics to achieve maximum distance.
INSTRUCTIONS
Step 1: To change weight settings, loosen and remove
both weights using the wrench provided to you by turning
it counter clockwise.
Step 2: Once both weights are removed, place the 12g
weight in your desired setting and the remaining 2g weight
in the empty weight port.
Step 3: Once you have your preferred setting, use the
wrench to tighten both weights by turning it clockwise
until you hear an audible click. DO NOT try to tighten the
weights by hand to prevent them from coming loose during
your swing.
KING F8
Place the 12g weight in the “Low” (FRONT) position to promote
a lower, penetrating ball ight, or in the “High” (BACK) to
promote a higher launching ball ight with slightly more spin.
KING F8+
Place the 12g weight in the “High” (BACK) position to promote
a higher, towering ball ight, or in the “Draw” (HEEL) position
to promote more draw for straighter drives.

TUNE YOUR TRAJECTORY
AND LAUNCH WITH MYFLY® .
8 adjustable loft settings help you maximize your
distance and consistency. COBRA’s patented Smart
Pad® Technology keeps your clubhead square at
address regardless of the loft setting.
INSTRUCTIONS
Step 1: To adjust the loft, loosen the shaft using the wrench
provided to you by inserting it into the screw on the sole.
Step 2: Turn it counterclockwise until the shaft can be pulled far
enough from the head to allow it to rotate.
Step 3: Rotate the shaft until your desired loft setting aligns with
the hosel window. Increasing or decreasing the loft will change the
trajectory + or - .7 degrees and the spin + or – 400 rpm respectively.
Step 4: Insert the shaft back into the head and tighten the screw by
turning the wrench clockwise until you hear a single, audible click.
QUICK TIPS
* If your ball ight is too low, increase the loft to add spin to promote
a higher trajectory with more carry.
* If your ball ight is too high, decrease the loft to reduce spin to
promote a lower trajectory with more roll.
TRACK AND TUNE
COBRA CONNECT.
COBRA CONNECT™, Powered By Arccos™, allows
golfers to track their driving distance and accuracy
using detailed stats and analysis to improve
their game.
For more information regarding
COBRA CONNECT, please visit:
www.cobragolf.com/cobraconnect