Cockpit CKNHID User manual

USER MANUAL EN.
Cockpit ON/OFF Thermostat
Add/Remove User Manual
Before starting adding your module, please complete set up procedure
for your COCKPIT gateway.
For more information about COCKPIT gateway set up procedure, please
refer to the COCKPIT gateway User Manual.
Type: ON/OFF Thermostat Date: 17.03.2020
Ordering code: CKNHID Document: COCKPIT_Electric_Heating_Thermostat_Add.Rem_v2_eng
1

4
2
3
2. Click “Home Setup” tab
located at the bottom of the
Cockpit@Home app.
3. Click „Manage devices”.
Adding ON/OFF Thermostat
2
1. Turn off the mains and wire ON/OFF Thermostat
module as shown on the diagram and connect
temperature sensor to the TS connector (please
refer to the ON/OFF Thermostat user manual for
more info).
4. Click „+ Add device”.

3
5. Select „Heating / Cooling” from
the list of available device types.
8. After successfully adding the
device, an appropriate message
will be displayed. Press „Next”
button to proceed.
7. Read the instructions and
choose one of the options
available for adding for adding
the ON/OFF Thermostat
module. In this manual the use
of auto-inclusion feature is
presented.Connect the
module to the power supply to
start the auto-inclusion.
6
6. Select „ON/OFF Thermostat”.
COCKPIT gateway will open the
network for inclusion.
8
5

4
9. Name the device (e.g. Water
Heater) and select the room
(e.g. Bathroom) for the ON/OFF
Thermostat module. When you
are done, click “Finish” button.
10. You will be directed to the
screen with the list of all added
devices, where the newly
added ON/OFF Thermostat
module should be listed.
11. Press the arrow button to
proceed.
11 13. To locate newly added device,
click “Devices” tab at the
bottom of the screen.
14. If device is not shown on the
list, choose the proper room by
pressing „Device by location”
button.
13
14
12. The procedure of adding the
ON/OFF Thermostat module
has been completed. You will
be redirected to the “Home
Setup” screen.
9

Removing ON/OFF Thermostat
1
2
3
4
5
1. Click “Home Setup” tab located
in the bottom of Cockpit@Home
app.
2. Click „Manage devices” button.
3. Click on “settings” icon located
next to the ON/OFF Thermostat
module name.
4. Select “Exclude device”
option.
5. COCKPIT gateway will open
the network for exclusion.
6. Read the instructions and
choose one of the options
available for removing the
ON/OFF Thermostat module.

6
7. Remove the module by
connecting it into the mains and
pressing the Service button (S) for
more than 6 seconds.
8. When the device / node have
been removed, appropriate
information will appear on the
screen. Click “OK” button to
finish the process.
8
10. The procedure for removing
the ON/OFF Thermostat
module is now complete. You
will be directed to the “Home
Setup” screen.
9. You will be directed back to the
screen with a list of devices on
which the ON/OFF Thermostat
module is no longer present.
Press the arrow button to
proceed.
9

COCKPIT Smart Home d.o.o. Nova Gorica
Ulica Klementa Juga 007
5250 Solkan
Slovenia
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
Web: www.yourcockpit.biz
7