Cocoon HE180364 User manual

1. ADD NEW
DEVICE
• The LED indicator light will be flashing red
• If you are having issues please refer to your manual
Scan this code
or search for
Cocoon Connect
2. SELECT SMART
CAMERA (IN SECURITY
& SENSOR)
INDICATOR
LIGHT
First time users:
Register an account and follow the remaining prompts on screen
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. USB Power going to the Indoor Camera
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
3. Confirm Pairing Mode 4. Add the CAMERA
1. BEFORE YOU START 2. App Setup

1. Hold the mobile phone 15 to 20cm in front of the Indoor Camera
for the camera to scan the QR code
2. Camera will beep when the code is scanned
3. Press ‘Heard the Beep’
LED WILL BE
FLASHING GREEN
Use, manage and control your Smart Indoor Camera from the Cocoon
Connect app
If you have any issues with this step, ensure your password is correct
If you are still having issues, please check your Instruction Manual
5. Connect camera to wifi 6. SCAN QR CODE WITH CAMERA 7. camera added
successfully
8. control your
Indoor Camera