Cocoon HE200073-S User manual

Smart Wireless
Camera With
Solar Panel
User Guide
Model: HE200073-S
Version 1.0

Wireless Camera with Solar Panel
3
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Warranty Note
Getting the most out of your Smar Wireless Camera:
Read the entire manual
It will help you set up with ease
Visit www.cocoonproducts.com.au
We have additional suppor videos and guides
Call Aer Sales Suppor - 1300 663 907
Or email [e-mail] - we’re always happy to help
If you experience any issues with this product or its perormance is not what you had expected,
please contact our friendly customer service team
It is likely that we can resolve problems for you via phone or email
We can be reached on:
Phone: [phone] (Mon - Fri; 8:30am - 6:00pm AEST)
Email: [e-mail]
Web: www.cocoonproducts.com.au

AFTER SALES SUPPORT
1300 663 907
AUS [email protected] YEAR WARRANTY
1
MODEL: HE200073-S PRODUCT CODE: 707109 10/2021
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period of 12
months from the date of purchase. Defects that occur within this warranty period, under normal
use and care, will be repaired, replaced or refunded at our discretion. The benets conferred by this
warranty are in addition to all rights and remedies in respect of the product that the consumer has
under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage.You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
REGISTER YOUR PURCHASE ATwww.aldi.com.au/en/about-aldi/product-registration/
TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
SMART WIRELESS CAMERA & SOLAR PANEL

Wireless Camera with Solar Panel
5
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Safety Instructions
• Carefully read all safety instructions and the user manual before operation
• If power is reset then please allow 1-2 minutes for a Wi-Fi connection to be re-established
• Handle with care. Don’t drop the Wireless Camera, especially on a hard surace. Do not crush,
squeeze, puncture, bend, deform, shred or submerge the Wireless Camera in liquid
• Never use the Wireless Camera if any par of it is damaged
• Do not attempt to open or disassemble the Wireless Camera.
• Modifying any pars may void your warranty
• While the Wireless Camera is rated IP65, do not expose it to strong water jets or submerge it.
Avoid installing this product in a location with high humidity or in a location where liquid may
consistently spill onto it. Liquid may cause a shor circuit which can result in electric shock or ire.
Never attempt to dry the Wireless Camera with an appliance such as a hair dryer or in a microwave
oven
• Do not wash the Wireless Camera with corrosive or liquid aerosol cleaners. Always use a damp,
so cloth for cleaning
• Children should be supervised to ensure they do not play with this appliance. Close supervision is
necessary when any appliance is used by or near children
• Do not install the Wireless Camera near any heat sources such as radiators, stoves or other
appliances that can generate heat
• At the end of its working life, observe local regulations when disposing of this product
• Dispose of batteries in an environmentally friendly matter
• The manufacturer is not responsible for loss or stolen goods
• Do not mix old and new batteries
• This unit comes supplied with Lithium Ion Batteries. Do not mix Alkaline, standard (Car-Zinc), or
rechargeable (Nickel-Cadmium) batteries with this product. If the battery comparment does not
close securely, stop using the product and keep it away from children
• Batteries should not be exposed to excessive heat such as sunshine, ire or the like
• The battery should be charged at least every three months to avoid shorening the battery life
• Dispose of used batteries according to the instructions
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme temperatures that a battery can be subjected to
during use, storage or transporation.
• If the battery is subjected to low air pressure at high altitude.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the
case of some lithium battery types).
• Disposal of a battery into ire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
lammable liquid or gas.
This product has been tested to AS/NZS CISPR 32, AS/NZS 4268 and AS/NZS 62368.1.

Wireless Camera with Solar Panel
61300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Contents
Warranty Note 3
Safety Instructions 5
Contents 6
Pars List 7
Technical Speciications 7
Installing the Cocoon Connect App 8
Before you star 8
Setting up the Cocoon Connect application for the irst time 8
Create a Home 9
Setup 10
Insering batteries 10
Charging the batteries 10
Setting up the Wireless Camera in the Cocoon Connect app 10
Operation 12
Main controls 12
Settings menu 13
Additional Functionality 14
Adding other Cocoon Connect accounts to your Home 14
MicroSD card usage 14
Solar Panel Installation 15
Mounting the solar panel 15
Connect the solar panel to your Smar Wireless Camera 15
Troubleshooting 16
Firmware updates 16
FAQs 17
Maintenance, Storage & Disposal 18

Wireless Camera with Solar Panel
7
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Pars List
1. 1 x Smar Wireless Camera
2. 1 x Base bracket*
3. 2 x Rechargeable batteries*
4. 1 x Screw for bracket*
5. 1 x USB charging cable*
6. 1 x Adhesive tab*
7. 1 x Solar panel
8. 1 x Silicone camera cover*
9. 1 x Long charging cable*
10. 1 x Getting stared guide*
11. 1 x User guide*
12. 1 x Screws for solar panel
13. 1 x Warranty ceriicate*
* Not shown
Technical Speciications
• 1080P Resolution
• Water resistant IP65
• Wide angle lens
• Micro SD Slot (up to 64GB, card not included)
• Rechargeable batteries via USB
• WI-FI 2.4Ghz
• Infrared night vision
• 2 way audio with noise suppression
• DC Power Input: 5V d.c. 1A
• Battery rating: 3.7V d.c. 2600mAh X 2
NOTE:
• Your phone does not have to be connected to your local Wi-Fi to
use this device, however mobile charges may apply
• The Cocoon Connect App is subject to change over time. The
manual is written as per Cocoon Connect app version 1.1.6. Please
see our website for any updates on the app
Internal view
21
3
1. MicroSD card slot
2. Reset button
3. Power button

Wireless Camera with Solar Panel
81300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Before you star
• Know your Wi-Fi network & password
• The Smar Wireless Camera requires a Wi-Fi connection to communicate
to the Cocoon Connect application
• Make sure your mobile device is running iOS 10 or higher or Android 4.4
or higher
Setting up the Cocoon Connect application for the irst
time
1. Download the Cocoon Connect application by scanning the QR
code provided or downloading it from the iOS App Store or Google
Play Store
2. Launch the application and select Register to register a Cocoon
Connect account
3. Select Agree to Terms and Conditions and then you will be
required to enter an email address and press Obtain veriication
code. A veriication code will then be sent to the email address you entered
4. Enter the veriication code into the password ield
5. Set the password for your Cocoon Connect account
OPTIONAL: Click on eye icon to unhide the password
Installing the Cocoon Connect App

Wireless Camera with Solar Panel
9
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Create a Home
The irst time you set up the Cocoon Connect application, you will be prompted to create a
Home.
Creating a home allows you to invite other Cocoon Connect account holders to control the
same device. Creating a home is a good way of giving other household members control of
Connected Home devices
1. Select Create home
2. Enter a name for the Home, for example use your surname, address or workplace etc.
3. Set the location for the Home. If location is turned on, the Cocoon Connect application can
use your smarphone’s GPS function to pinpoint your location.
NOTE: You do not have to enter a location or use this feature
4. Select (or un-select) rooms which will have Cocoon Connect devices (e.g. living room,
bedroom, front door). Add new rooms if required
5. Select Done on the top right-hand side to create the Home. You will get the conirmation
Home Created Successfully
Installing the Cocoon Connect App

Wireless Camera with Solar Panel
10 1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Insering batteries
To operate the Wireless Camera, 2 x rechargeable 18650 Li-Ion batteries need to be insered.
It is also recommended you charge the batteries prior to use.
NOTE: For irst time charging, use a constant USB power source (not included) and not the included
solar panel
1. Move switch on the top of camera to open position to unlock the casing
2. Open case to see battery comparment
3. Ensure power switch is set to Of
4. Inser batteries methodically, taking care with polarity
5. Switch power On, close case and set top switch to lock position
6. The Wireless Camera will power up and say “The Camera is now ready to begin pairing”
and the le LED will lash blue / purple
Charging the batteries
1. Make sure the included batteries are secure in the camera in the correct polarity positions
2. Plug the Micro USB end of the USB cable into the bottom of the smar wireless camera
NOTE: For irst time charging, use a constant USB power source (not included) and not the included
solar panel
3. Plug the other end of the USB cable into a DC 5V USB power supply (Not included)
Setting up the Wireless Camera in the
Cocoon Connect app
1. Open the Cocoon Connect app on your phone
which is connected to your Wi-Fi network and
log into your account
2. Select the Home tab on the bottom le hand
side
3. Select the + icon on the top right-hand side or
select Add Device to add a product
4. Select Add Manually, select AU in the menu
on the le hand side, then select the Wireless
Camera icon on the right
5. Conirm the blue/purple LED on the Wireless
Camera is lashing by selecting Next Step. If not,
reset the camera as per “FAQs” on page 17
Setup

Wireless Camera with Solar Panel
11
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
6. Verify that your smarphone is connected to the Wi-Fi network
you wish to connect the Wireless Camera to.
a. With initial connection, it is recommended to have the
Wireless Camera near your Wi-Fi router to ensure a clear
network connection
b. If there is more than one Wi-Fi network, you can change
the Wi-Fi network your phone is connected to by selecting
the Wi-Fi network name. You will be taken to your settings
where you can change your network settings. Once
changed, return to previous screen to enter your Wi-Fi
password
c. Enter your local Wi-Fi password and select Conirm. You
can click on the eye icon to see your password on your
screen
7. With the local Wi-Fi network conirmed, you will need to scan a
unique QR Code that will appear on your phone
a. Tap Continue and a QR Code will be displayed on the
phone screen
b. Place the phone approximately 15-20cm in front of the
Wireless Camera (LED blinking rapidly) with the QR code
facing the camera
c. The Wireless Camera will read the unique QR code and an
audible sound will be heard. In addition, the LED will turn blue and begin lashing
d. Once you hear the sound, select Heard the Beep on the application
e. If you do not hear a beep, select Heard nothing at all on the app and follow instructions
on screen (see “Troubleshooting” on page 16)
8. Having selected Heard the Beep the application will begin registering the device with your
account. This can take a few minutes
9. Once the Wireless Camera is paired with the app, you will be asked to name it and to select
a room
a. The name of the Wireless Camera should be simple and descriptive
b. Select the room icon to select the Wireless Camera’s location
c. Then select Complete. The app will then star retrieving the camera’s video stream
10. You can also view the video stream from the Product Control Screen
a. Your phone does not have to be connected to your local Wi-Fi to view the Wireless
Camera (however mobile data charges may apply if it’s not)
Setup

Wireless Camera with Solar Panel
12 1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Main controls
Once added to the Cocoon Connect app, you
can tap on the Wireless Camera from the home
screen to access the video feed and controls.
Each of the items on the screen allow the
following functions:
1. Date & Time Watermark: Displays the
device’s date and time on video stream
(must be turned on in settings)
2. Settings: Allows you to adjust furher
settings for the camera (see below)
3. Signal: Wi-Fi signal strength in percentage
4. Speaker: Select to hear audio from the
camera
5. HD / SD: High Deinition or Standard
Deinition selection
6. Full Screen Icon: Plays the video in full
screen
7. Battery: Shows the cameras current
battery percentage
8. Screenshot: Takes a screenshot of the
current video stream onto your smarphone
9. Speak: Hold this button to allow two-way
communication. Unmutes camera
10. Record: Activates the recording of real
time video onto your Smarphone
11. Playback: Allows the playback of video
stored on the SD Card (sold separately) in
the Smar Wireless Camera.
12. Cloud Storage: Set up cloud storage for
records that cannot be destroyed or stolen
NOTE: Additional fees apply
13. Photo album: Review images or videos
recorded to your smarphone photo gallery
Operation
1
3
2
4 5
8
7
11
9
12
10
13
6

Wireless Camera with Solar Panel
13
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Settings menu
a. Device Name: Allows user to edit the name and Room
locationof the Smar Wireless Camera
b. Share Device: Allows user to share device to another
user.
It is recommended to share device via home
management option (see “Adding other Cocoon
Connect accounts to your Home” on page 14) so a
Home member can control the device
c. Device Information: Provides the device owner
account name, device’s IP address, the unique device
ID, device time zone & the Wi-Fi strength of the
network
d. Use Echo: Provides step by step instructions on
adding the Smar Wireless Camera to an Amazon Echo
device (Sold separately)
e. Power Management Settings:
f. Basic Function Settings:
• Flip Screen: Rotates the video stream 180°
g. Motion Detection: Adjust motion sensitivity between
Of, Low, Medium or High
h. Value Added Service (VAS) Purchase: Link to cloud
storage for video stream of Smar Wireless Camera
i. Storage Settings:
• Storage Capacity: Shows total, used and
remaining capacity of SD Card (SD Card not
included)
j. FAQ & Feedback: The user can access our FAQs and also provide feedback via the app to
resolve networking, application and device issues
k. Firmware information: Provides current irmware version of the application, the last time
it was updated and allows the user to check for irmware upgrades
l. Remove Device: Allows you to remove the Smar Wireless Camera from your account and
home
Operation
a
b
c
d
e
f
g
h
i
j
k
l

Wireless Camera with Solar Panel
14 1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Additional Functionality
Now that you have set up this device you may want to connect it with other Cocoon Connect
devices. For example, you may want a Smar Bulb to activate if a motion is detected.
Instructions for applying such functions can be found on our website https://cocoonproducts.
com.au/
Voice control, via third pary suppor, is also another great way to control Cocoon Connect
products. Voice control instruction can be found in our manual online. In addition, you will ind
a list of associated commands.
Adding other Cocoon Connect accounts to your Home
Follow these steps to add allow other Cocoon Connect accounts access to a Home:
1. Select your current Home in the top le corner of the main page and select Home
Management
2. Select the Home you want to allow another account to access
3. Select Add Member – the home member must set up an account prior to adding them
4. Fill out the details for the new Home member
5. Select if you want to give that account administrator rights – allowing them to make
changes to the settings of devices in that home (including removing the whole home). This
will also allow them to create automations of these devices
6. Select completed and Cocoon Connect will send an invitation for the account to join the
home to access the connect devices
MicroSD card usage
The Smar Wireless Camera can be used with a MicroSD card (not included) to record
and store footage to review later. The MicroSD card slot can be found inside the battery
comparment.
To install:
1. Open the casing to see the battery comparment
2. The MicroSD card slot is located behind the battery furhest away from the power button
3. To unlock the MicroSD slot, slide the silver cover down (it will click down into place) and
gently pull down
4. Place a MicroSD card with the contacts facing down, as per the small diagram above the
slot
5. Gently replace the silver cover, and slide back up so it clicks into place on top of the
MicroSD card

Wireless Camera with Solar Panel
15
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
The solar panel requires full, direct sunlight to charge your camera. Grey skies, rainy days,
and other inclement weather conditions may hinder the ability of the solar panel to generate
power.
• For best results, the solar panel should be tilted towards the sun. The optimum angle varies
throughout the year, depending on the seasons and your location.
• Preferably, mount the solar panel somewhere that receives plenty of sunlight, between
10am and 3pm, to fully sustain your camera’s power needs all year round. Avoid placing in
a shady area. Shading from trees and buildings will substantially reduce the output of the
solar panel.
• The solar panel is designed to maintain the camera’s battery charge level based upon
the amount of sunlight received daily. It is not intended to power a lat camera or to fully
charge a camera from a low battery state. We recommend fully charging your camera via
your regular USB charger before attaching to the solar panel.
• Keep the solar panel surace clear of leaves and debris for optimum perormance.
Mounting the solar panel
1. Attach the mounting bracket to a solid surace with the supplied screws. Make sure to
allow enough charging cable to reach your camera from the mounting location of the solar
panel.
NOTE: If mounting to a wooden surace, screw the mounting bracket directly to the surace. If mounting
to a masonry surace (bricks, concrete, or stucco), drill three holes using a 8mm(1/8”) drill bit and inser
the supplied wall plugs into holes. Then secure the mounting bracket to the surace with supplied screws
2. Attach the solar panel to the mounting bracket. Align the solar panel with the threaded
screw on the swivel head mount, and then screw in the solar panel until it is secured
tightly.
3. The solar panel produces power only when it is exposed to sunlight. To generate the most
power and achieve best charging perormance, tilt the solar panel towards the sun, away
from cover and shade.
Connect the solar panel to your Smar Wireless Camera
1. Inser the micro usb cable into the silicone waterproof cover.
2. Put the Smar Wireless Camera into the silicone waterproof cover and connect the micro
usb cable into the charging por on the base of the camera.
NOTE:
• If the solar panel is used, the included silicone cover must be used on the camera at all times
• The camera can be used without the included solar panel, however charging must be done via USB
Solar Panel Installation

Wireless Camera with Solar Panel
16 1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
Troubleshooting
My connection process does not work
If your connection process fails, then you may see the
screen to the right
Failed to add device
There are several potential problems, including but
not limited to an incorrect Wi-Fi password, router
irewall settings, network irewall settings, poor wireless
communication and security settings on router. With
the initial connection, it is recommended to have the
device near your Wi-Fi router to ensure a clear network
connection. For furher troubleshooting, press the View
Details tab
Why is there no prompt from the camera?
If the device is not providing a prompt when the QR code is help up to the camera lens try the
below:
1. Ensure that the lens is not blocked. If the camera has a protective ilm, remove it before
you scan the QR code
2. Place the app QR code in front of the camera at a distance of 15cm to 20cm. Adjust the
angle and distance until you hear a prompt
3. Reset your camera and try step 2 again
Firmware updates
Visit https://suppor.cocoonproducts.com.au for the latest irmware updates for the Smar
Wireless Camera
Warning: Before installing any irmware updates the camera must have at least 80% battery
charge. It is recommended that you recharge your Wireless Camera completely before any
irmware update. If there is not enough battery power there is a risk the irmware will not load
correctly, rendering the camera unusable. Do not power of the camera during a irmware
update.

Wireless Camera with Solar Panel
17
1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
FAQs
Question Solution
I can’t get the blue / purple LED to blink
rapidly for set up of my Wireless Camera
Ensure that the camera is powered up and
hold the Reset button down for 6 seconds.
The Wireless Camera should now say “The
Camera is now ready for pairing” and the
Blue/Red LED will star blinking rapidly
My Wireless Camera does not load on
my App
Check that your internet router is on
and reset if needed. Please see the
troubleshooting section for when the
connection process does not work.
What if my Router is not 2.4GHz? Wi-Fi routers operate in two bands, 2.4GHz
and 5GHz. Some routers operate on both
bands simultaneously. The Cocoon Connect
Wireless Camera can only operate on the
2.4GHz frequency.
Why are the speaker and microphone
not working?
Check the app settings to make sure they
are not disabled
How do I turn On/Of Push Notiications? Push notiications for the camera can be
accessed in the settings function under
motion detection. Push notiications for
your whole account can be accessed via the
settings in the ‘Me’ menu
Where can I get additional Cocoon
Connect products?
Additional Cocoon Connect smar home
products are available at your local ALDI
store and at
https://cocoonproducts.com.au
For more information, setup guides and videos, please visit
https://cocoonproducts.com.au

Wireless Camera with Solar Panel
18 1300 663 907
After Sales Support
[email protected]om.au
www.cocoonproducts.com.au
Model number: HE200073-S
10/2021
The Smar Wireless Camera does not require scheduled maintenance or cleaning. Should
cleaning be necessary, simply wipe the outside surace with a dry so cloth. Be sure to unplug
this device before cleaning.
Always store your device in a clean dry environment and avoid storage in extreme heat or cold.
At the end of its working life, do not throw this product out with your household rubbish.
Electrical and electronic products contain substances that can have a detrimental efect on the
environment and human health if disposed of inappropriately. Observe any local regulations
regarding the disposal of electrical consumer goods and dispose of it appropriately for
recycling. Contact your local authorities for advice on recycling facilities in your area.
Observe and local regulations regarding the disposal of waste products. Contact your local
authorities for advise on recycling facilities in your area.
Please keep the original packaging caron and materials in a safe place. It will help to prevent
any damage if the product needs to be transpored in the future. In the event it is to be
disposed of, please recycle all packaging material where possible.
If you require another copy of this instruction manual, please contact help@cocoonproducts.
com.au to obtain an electronic copy.
Maintenance, Storage & Disposal

Unfortunately, from time to time, faulty products are manufactured which need to be returned to
the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such asles
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored
on a portable media player, games saved on a games console or les stored on a USB memory
stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them withrefurbished
goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they meet
ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on1300 663 907 or write to us at:
Balco Brands Pty Ltd
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[email protected]
Repair and Refurbished Goods or Parts Notice
AFTER SALES SUPPORT
1300 663 907
AUS [email protected] YEAR WARRANTY
1
MODEL: HE200073-S PRODUCT CODE: 707109 10/2021
SMART WIRELESS CAMERA & SOLAR PANEL